104 lines
4.2 KiB
Python
104 lines
4.2 KiB
Python
"""
|
||
QMI8658
|
||
|
||
Micropython library for the QMI8658(Accelerometer+Gyroscope)
|
||
=======================================================
|
||
|
||
#Preliminary composition 20220716
|
||
|
||
dahanzimin From the Mixly Team
|
||
"""
|
||
import time
|
||
from micropython import const
|
||
|
||
QMI8658_REG_DEVICE_ID = const(0x00)
|
||
|
||
QMI8658_REG_Ctrl1 = const(0x02) #Serial Interface and Sensor Enable
|
||
QMI8658_REG_Ctrl2 = const(0x03) #Accelerometer Settings
|
||
QMI8658_REG_Ctrl3 = const(0x04) #Gyroscope Settings
|
||
QMI8658_REG_Ctrl5 = const(0x06) #Sensor Data Processing Settings
|
||
QMI8658_REG_Ctrl7 = const(0x08) #Sensor Data Processing Settings
|
||
QMI8658_REG_Ctrl9 = const(0x0A) #Host Commands
|
||
QMI8658_REG_StatusInt = const(0x2D) #Sensor Data Available and Lock Register Address
|
||
QMI8658_REG_DATA = const(0x33)
|
||
|
||
Qmi8658AccRange_2g = 0 #/* +/- 2g range */
|
||
Qmi8658AccRange_4g = 1 #/* +/- 4g range */
|
||
Qmi8658AccRange_8g = 2 #/* +/- 8g range */
|
||
Qmi8658AccRange_16g = 3 #/* +/- 16g range */
|
||
|
||
Qmi8658GyrRange_16dps = 0 #/* +-16 degrees per second. */
|
||
Qmi8658GyrRange_32dps = 1 #/* +-32 degrees per second. */
|
||
Qmi8658GyrRange_64dps = 2 #/* +-64 degrees per second. */
|
||
Qmi8658GyrRange_128dps = 3 #/* +-128 degrees per second. */
|
||
Qmi8658GyrRange_256dps = 4 #/* +-256 degrees per second. */
|
||
Qmi8658GyrRange_512dps = 5 #/* +-512 degrees per second. */
|
||
Qmi8658GyrRange_1024dps = 6 #/* +-1024 degrees per second. */
|
||
Qmi8658GyrRange_2048dps = 7 #/* +-2048 degrees per second. */
|
||
|
||
Qmi8658Acc_Gyr_Odr_8000Hz = 0x00 #/* High resolution 8000Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_4000Hz = 0x01 #/* High resolution 4000Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_2000Hz = 0x02 #/* High resolution 2000Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_1000Hz = 0x03 #/* High resolution 1000Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_500Hz = 0x04 #/* High resolution 500Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_250Hz = 0x05 #/* High resolution 250Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_125Hz = 0x06 #/* High resolution 125Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_62_5Hz = 0x07 #/* High resolution 62.5Hz output rate. */
|
||
Qmi8658Acc_Gyr_Odr_31_25Hz= 0x08 #/* High resolution 31.25Hz output rate. */
|
||
|
||
class QMI8658:
|
||
def __init__(self, i2c_bus,addr=0x6B,AccRange=Qmi8658AccRange_8g,GyrRange=Qmi8658GyrRange_2048dps,Acc_Gyr_Odr=Qmi8658Acc_Gyr_Odr_500Hz):
|
||
self._device = i2c_bus
|
||
self._address = addr
|
||
if self._chip_id() != 0x05:
|
||
raise AttributeError("Cannot find a QMI8658")
|
||
|
||
self._wreg(QMI8658_REG_Ctrl9,0xA2) #做selftest，提高精度
|
||
time.sleep(1)
|
||
self._wreg(QMI8658_REG_Ctrl1,0x60)
|
||
self._wreg(QMI8658_REG_Ctrl7,0x03) #启动
|
||
self._wreg(QMI8658_REG_Ctrl2,(AccRange<< 4)|Acc_Gyr_Odr) #ACC-500HZ/8G
|
||
self._wreg(QMI8658_REG_Ctrl3,(GyrRange<< 4)|Acc_Gyr_Odr) #Gyr-500HZ/2048dps
|
||
self._wreg(QMI8658_REG_Ctrl5,0x75) #Gyr-14%,ACC-5.32%
|
||
self.gyr_lsb_div= 2**(11-GyrRange)
|
||
self.acc_lsb_div= 1<<(14-AccRange)
|
||
|
||
def _wreg(self, reg, val):
|
||
'''Write memory address'''
|
||
self._device.writeto_mem(self._address,reg,val.to_bytes(1, 'little'))
|
||
|
||
def _rreg(self, reg,nbytes=1):
|
||
'''Read memory address'''
|
||
return self._device.readfrom_mem(self._address, reg, nbytes)[0] if nbytes<=1 else self._device.readfrom_mem(self._address, reg, nbytes)[0:nbytes]
|
||
|
||
def _chip_id(self):
|
||
return self._rreg(QMI8658_REG_DEVICE_ID)
|
||
|
||
def status(self):
|
||
return self._rreg(QMI8658_REG_StatusInt)
|
||
|
||
def u2s(self,n):
|
||
return n if n < (1 << 15) else n - (1 << 16)
|
||
|
||
def getdata(self):
|
||
while self.status() == 0x81:
|
||
time.sleep(0.001)
|
||
_buffer=self._rreg(QMI8658_REG_DATA,14)
|
||
tmp= float(self.u2s(_buffer[1]<<8|_buffer[0]))/256.0
|
||
acc_x=float(self.u2s(_buffer[3]<<8|_buffer[2]))/self.acc_lsb_div
|
||
acc_y=float(self.u2s(_buffer[5]<<8|_buffer[4]))/self.acc_lsb_div
|
||
acc_z=float(self.u2s(_buffer[7]<<8|_buffer[6]))/self.acc_lsb_div
|
||
gyr_x=float(self.u2s(_buffer[9]<<8|_buffer[8]))/self.gyr_lsb_div
|
||
gyr_y=float(self.u2s(_buffer[11]<<8|_buffer[10]))/self.gyr_lsb_div
|
||
gyr_z=float(self.u2s(_buffer[13]<<8|_buffer[12]))/self.gyr_lsb_div
|
||
return (acc_x,acc_y,acc_z),(gyr_x,gyr_y,gyr_z),round(tmp,2)
|
||
|
||
def accelerometer(self):
|
||
return self.getdata()[0]
|
||
|
||
def gyroscope(self):
|
||
return self.getdata()[1]
|
||
|
||
def temperature(self):
|
||
return self.getdata()[2]
|