全部mpy增加心知天气、网络请求、ds18x20
This commit is contained in:
Irene-Maxine
@@ -1,333 +1,333 @@
|
||||
"""
|
||||
MINI_WCH
|
||||
|
||||
Micropython library for the MINI_WCH(TOUCH*2, MIC*1, Buzzer*1, PWM*2, Matrix8x12, HID)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
import time
|
||||
from esp import flash_read
|
||||
from micropython import const
|
||||
from framebuf import FrameBuffer, MONO_VLSB
|
||||
|
||||
_BOT035_ADDRESS = const(0x13)
|
||||
_BOT5_TOUCH = const(0x01)
|
||||
_BOT035_MIC = const(0x05)
|
||||
_BOT035_SPK = const(0x07)
|
||||
_BOT035_PWM = const(0x0B)
|
||||
_BOT035_FLAG = const(0x0F)
|
||||
_BOT035_LEDS = const(0x10)
|
||||
_BOT035_PGA = const(0x20)
|
||||
_BOT035_KB = const(0x1C)
|
||||
_BOT035_MS = const(0x20)
|
||||
_BOT035_STR = const(0x24)
|
||||
_FONT_W = const(5)
|
||||
_FONT_H = const(8)
|
||||
_LEDS_W = const(12)
|
||||
_LEDS_H = const(8)
|
||||
_FONT5x8_CODE = const(b'\x05\x08\x00\x00\x00\x00\x00\x00\x00_\x00\x00\x00\x07\x00\x07\x00\x14\x7f\x14\x7f\x14$*\x7f*\x12#\x13\x08db6IV P\x00\x08\x07\x03\x00\x00\x1c"A\x00\x00A"\x1c\x00*\x1c\x7f\x1c*\x08\x08>\x08\x08\x00\x80p0\x00\x08\x08\x08\x08\x08\x00\x00``\x00 \x10\x08\x04\x02>QIE>\x00B\x7f@\x00rIIIF!AIM3\x18\x14\x12\x7f\x10\'EEE9<JII1A!\x11\t\x076III6FII)\x1e\x00\x00\x14\x00\x00\x00@4\x00\x00\x00\x08\x14"A\x14\x14\x14\x14\x14\x00A"\x14\x08\x02\x01Y\t\x06>A]YN|\x12\x11\x12|\x7fIII6>AAA"\x7fAAA>\x7fIIIA\x7f\t\t\t\x01>AAQs\x7f\x08\x08\x08\x7f\x00A\x7fA\x00 @A?\x01\x7f\x08\x14"A\x7f@@@@\x7f\x02\x1c\x02\x7f\x7f\x04\x08\x10\x7f>AAA>\x7f\t\t\t\x06>AQ!^\x7f\t\x19)F&III2\x03\x01\x7f\x01\x03?@@@?\x1f @ \x1f?@8@?c\x14\x08\x14c\x03\x04x\x04\x03aYIMC\x00\x7fAAA\x02\x04\x08\x10 \x00AAA\x7f\x04\x02\x01\x02\x04@@@@@\x00\x03\x07\x08\x00 TTx@\x7f(DD88DDD(8DD(\x7f8TTT\x18\x00\x08~\t\x02\x18\xa4\xa4\x9cx\x7f\x08\x04\x04x\x00D}@\x00 @@=\x00\x7f\x10(D\x00\x00A\x7f@\x00|\x04x\x04x|\x08\x04\x04x8DDD8\xfc\x18$$\x18\x18$$\x18\xfc|\x08\x04\x04\x08HTTT$\x04\x04?D$<@@ |\x1c @ \x1c<@0@<D(\x10(DL\x90\x90\x90|DdTLD\x00\x086A\x00\x00\x00w\x00\x00\x00A6\x08\x00\x02\x01\x02\x04\x02<&#&<')
|
||||
_Uincode_ADDR = const(0x3A0000)
|
||||
|
||||
class BOT035(FrameBuffer):
|
||||
def __init__(self, i2c_bus, brightness=0.8):
|
||||
self._i2c= i2c_bus
|
||||
self._buffer = bytearray(12)
|
||||
self._brightness = brightness
|
||||
self._touchs = [self.touch(0), self.touch(1)]
|
||||
self._version = True if self._rreg(0x00) == 0x27 else False
|
||||
super().__init__(self._buffer, _LEDS_W, _LEDS_H, MONO_VLSB)
|
||||
self.reset()
|
||||
self.show()
|
||||
|
||||
def _chardata(self, ch):
|
||||
'''Ascall code font reading data'''
|
||||
if 0x20 <= ord(ch) <= 0x7f:
|
||||
char_index = 2 + (ord(ch)-32) * _FONT_W
|
||||
return _FONT5x8_CODE[char_index : char_index + _FONT_W]
|
||||
else:
|
||||
raise ValueError("Cannot display characters other than ASCLL code")
|
||||
|
||||
def _uincode(self, ch):
|
||||
'''uincode code font reading data'''
|
||||
uni = ord(ch)
|
||||
if 0x20 <= uni <= 0x2642 :
|
||||
_address = 0x28 + (uni - 0x20) * 4
|
||||
elif 0x3001 <= uni <= 0x9fa0 :
|
||||
_address = 0x98b4 + (uni - 0x3001) * 4
|
||||
elif 0xff01 <= uni <= 0xffe5 :
|
||||
_address = 0x25734 + (uni - 0xff01) * 4
|
||||
else:
|
||||
raise ValueError("Cannot display characters other than GB2312 code")
|
||||
buffer = bytearray(4)
|
||||
flash_read(_Uincode_ADDR + _address, buffer)
|
||||
font_info = buffer[3] << 24 | buffer[2] << 16 | buffer[1] << 8 | buffer[0]
|
||||
font_address = font_info & 0X3FFFFFF
|
||||
font_width = font_info >> 26
|
||||
buffer = bytearray( 12 * (font_width // 8 + 1))
|
||||
flash_read(_Uincode_ADDR + font_address, buffer)
|
||||
return buffer, font_width
|
||||
|
||||
def shift(self, x, y, rotate=False):
|
||||
"""Shift pixels by x and y"""
|
||||
if x > 0: # Shift Right
|
||||
for _ in range(x):
|
||||
for row in range(0, _LEDS_H):
|
||||
last_pixel = self.pixel(_LEDS_W - 1, row) if rotate else 0
|
||||
for col in range(_LEDS_W - 1, 0, -1):
|
||||
self.pixel(col, row, self.pixel(col - 1, row))
|
||||
self.pixel(0, row, last_pixel)
|
||||
elif x < 0: # Shift Left
|
||||
for _ in range(-x):
|
||||
for row in range(0, _LEDS_H):
|
||||
last_pixel = self.pixel(0, row) if rotate else 0
|
||||
for col in range(0, _LEDS_W - 1):
|
||||
self.pixel(col, row, self.pixel(col + 1, row))
|
||||
self.pixel(_LEDS_W - 1, row, last_pixel)
|
||||
if y > 0: # Shift Up
|
||||
for _ in range(y):
|
||||
for col in range(0, _LEDS_W):
|
||||
last_pixel = self.pixel(col, _LEDS_H - 1) if rotate else 0
|
||||
for row in range(_LEDS_H - 1, 0, -1):
|
||||
self.pixel(col, row, self.pixel(col, row - 1))
|
||||
self.pixel(col, 0, last_pixel)
|
||||
elif y < 0: # Shift Down
|
||||
for _ in range(-y):
|
||||
for col in range(0, _LEDS_W):
|
||||
last_pixel = self.pixel(col, 0) if rotate else 0
|
||||
for row in range(0, _LEDS_H - 1):
|
||||
self.pixel(col, row, self.pixel(col, row + 1))
|
||||
self.pixel(col, _LEDS_H - 1, last_pixel)
|
||||
self.show()
|
||||
|
||||
def shift_right(self, num, rotate=False):
|
||||
"""Shift all pixels right"""
|
||||
self.shift(num, 0, rotate)
|
||||
|
||||
def shift_left(self, num, rotate=False):
|
||||
"""Shift all pixels left"""
|
||||
self.shift(-num, 0, rotate)
|
||||
|
||||
def shift_up(self, num, rotate=False):
|
||||
"""Shift all pixels up"""
|
||||
self.shift(0, -num, rotate)
|
||||
|
||||
def shift_down(self, num, rotate=False):
|
||||
"""Shift all pixels down"""
|
||||
self.shift(0, num, rotate)
|
||||
|
||||
def map_invert(self, own):
|
||||
"""Graph invert operation"""
|
||||
result = bytearray()
|
||||
for i in range(len(own)):
|
||||
result.append(~ own[i])
|
||||
return result
|
||||
|
||||
def map_add(self, own, other):
|
||||
"""Graph union operation"""
|
||||
result = bytearray()
|
||||
for i in range(min(len(own), len(other))):
|
||||
result.append(own[i] | other[i])
|
||||
return result
|
||||
|
||||
def map_sub(self, own, other):
|
||||
"""Graphic subtraction operation"""
|
||||
result = bytearray()
|
||||
for i in range(min(len(own), len(other))):
|
||||
result.append((own[i] ^ other[i]) & own[i])
|
||||
return result
|
||||
|
||||
def set_buffer(self, buffer):
|
||||
for i in range(len(buffer)):
|
||||
self._buffer[i] = self._buffer[i] | buffer[i]
|
||||
|
||||
def _ascall_bitmap(self, buffer, x=0):
|
||||
if -_FONT_W <= x <= _LEDS_W:
|
||||
for _x in range(_FONT_W):
|
||||
for _y in range(_FONT_H):
|
||||
if (buffer[_x] >> _y) & 0x1:
|
||||
self.pixel(x + _x, _y, 1)
|
||||
|
||||
def _uincode_bitmap(self, buffer, x=0):
|
||||
_buffer, width = buffer
|
||||
if -width < x < _LEDS_H:
|
||||
for _y in range(12):
|
||||
for _x in range(width):
|
||||
if _buffer[_y * ((width + 7) // 8) + _x // 8] & (0x80 >> (_x & 7)):
|
||||
self.pixel(_y, _LEDS_H - (x + _x), 1)
|
||||
|
||||
def shows(self, data, space=1, center=True):
|
||||
"""Display character"""
|
||||
if data is not None:
|
||||
self.fill(0)
|
||||
if type(data) in [bytes, bytearray]:
|
||||
self.set_buffer(data)
|
||||
self.show()
|
||||
else:
|
||||
data = str(data)
|
||||
x = (_LEDS_W - len(data) * (_FONT_W + space) + space) // 2 if center else 0
|
||||
for char in data:
|
||||
self._ascall_bitmap(self._chardata(char), x)
|
||||
x = _FONT_W + x + space
|
||||
self.show()
|
||||
|
||||
def frame(self, data, delay=500):
|
||||
"""Display one frame per character"""
|
||||
if data is not None:
|
||||
data = str(data)
|
||||
for char in data:
|
||||
self.fill(0)
|
||||
self._ascall_bitmap(self._chardata(char), (_LEDS_W - _FONT_W) // 2)
|
||||
self.show()
|
||||
time.sleep_ms(delay)
|
||||
|
||||
def scroll(self, data, space=0, speed=100):
|
||||
"""Scrolling characters"""
|
||||
if data is not None:
|
||||
data = str(data)
|
||||
uincode = False
|
||||
for char in data:
|
||||
if ord(char) >= 0xff:
|
||||
uincode =True
|
||||
break
|
||||
if uincode:
|
||||
font_buffer = []
|
||||
str_len = 0
|
||||
for c in data:
|
||||
_buffer = self._uincode(c)
|
||||
font_buffer.append(_buffer)
|
||||
str_len = str_len + _buffer[1] + space
|
||||
for i in range(str_len + _LEDS_H - space):
|
||||
x = _LEDS_H - i
|
||||
self.fill(0)
|
||||
for buffer in font_buffer:
|
||||
self._uincode_bitmap(buffer, x)
|
||||
x = buffer[1] + x + space
|
||||
self.show()
|
||||
time.sleep_ms(speed)
|
||||
else:
|
||||
str_len = len(data) * (_FONT_W + space) - space
|
||||
for i in range(str_len + _LEDS_W + 1):
|
||||
x = _LEDS_W -i
|
||||
self.fill(0)
|
||||
for char in data:
|
||||
self._ascall_bitmap(self._chardata(char), x)
|
||||
x = _FONT_W + x + space
|
||||
self.show()
|
||||
time.sleep_ms(speed)
|
||||
|
||||
def _wreg(self, reg, val):
|
||||
'''Write memory address'''
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, reg, val.to_bytes(1, 'little'))
|
||||
|
||||
def _rreg(self, reg, nbytes=1):
|
||||
'''Read memory address'''
|
||||
self._i2c.writeto(_BOT035_ADDRESS, reg.to_bytes(1, 'little'))
|
||||
return self._i2c.readfrom(_BOT035_ADDRESS, nbytes)[0]
|
||||
|
||||
def reset(self):
|
||||
"""Reset SPK, PWM, HID registers to default state"""
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_SPK, b'\x0A\x00\x00\x00\x20\x4E\x64\x64')
|
||||
if self._version: self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_KB, bytes(9))
|
||||
|
||||
def get_brightness(self):
|
||||
return self._brightness
|
||||
|
||||
def set_brightness(self, brightness):
|
||||
if not 0.0 <= brightness <= 1.0:
|
||||
raise ValueError("Brightness must be a decimal number in the range: 0.0-1.0")
|
||||
self._brightness = brightness
|
||||
self._wreg(_BOT035_FLAG, _BOT035_PGA | round(10 * brightness))
|
||||
|
||||
def show(self):
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_LEDS, self._buffer)
|
||||
|
||||
def buzzer(self, duty=None, freq=None):
|
||||
if duty is not None:
|
||||
duty = max(min(duty, 100), 0)
|
||||
self._wreg(_BOT035_SPK + 2, int(duty))
|
||||
if freq is not None:
|
||||
freq = max(min(freq, 65535), 10)
|
||||
self._wreg(_BOT035_SPK, freq & 0xFF)
|
||||
self._wreg(_BOT035_SPK + 1, freq >> 8)
|
||||
if freq is None and duty is None:
|
||||
return self._rreg(_BOT035_SPK + 2), self._rreg(_BOT035_SPK) | self._rreg(_BOT035_SPK + 1) << 8
|
||||
|
||||
def usben(self, index=1, duty=None, freq=None):
|
||||
index = max(min(index, 2), 1) - 1
|
||||
if duty is not None:
|
||||
duty = max(min(duty, 100), 0)
|
||||
self._wreg(_BOT035_PWM + index + 2, int(duty))
|
||||
if freq is not None:
|
||||
freq = max(min(freq, 65535), 10)
|
||||
self._wreg(_BOT035_PWM, freq & 0xFF)
|
||||
self._wreg(_BOT035_PWM + 1, freq >> 8)
|
||||
if freq is None and duty is None:
|
||||
return self._rreg(_BOT035_PWM + index + 2), self._rreg(_BOT035_PWM) | self._rreg(_BOT035_PWM + 1) << 8
|
||||
|
||||
def touch(self, index, value=None):
|
||||
index = max(min(index, 1), 0)
|
||||
touch = 4095 - (self._rreg(_BOT5_TOUCH + index * 2) | self._rreg(_BOT5_TOUCH + index * 2 + 1) << 8)
|
||||
return touch > value if value else touch
|
||||
|
||||
def touched(self, index, value=600):
|
||||
return self.touch(index, value)
|
||||
|
||||
def touch_slide(self):
|
||||
values = []
|
||||
for i in range(30):
|
||||
values.append((self.touch(1) - self._touchs[1]) - (self.touch(0) - self._touchs[0]))
|
||||
return round(sorted(values)[15] / 10)
|
||||
|
||||
def soundlevel(self):
|
||||
values = []
|
||||
for i in range(50):
|
||||
values.append(self._rreg(_BOT035_MIC) | self._rreg(_BOT035_MIC + 1) << 8)
|
||||
values = sorted(values)
|
||||
return values[-10] - values[10]
|
||||
|
||||
def hid_keyboard(self, special=0, general=0, release=True):
|
||||
if self._version:
|
||||
self._buf = bytearray(4)
|
||||
self._buf[0] = special
|
||||
if type(general) in (tuple, list):
|
||||
for i in range(len(general)):
|
||||
if i > 2: break
|
||||
self._buf[i + 1] = general[i]
|
||||
else:
|
||||
self._buf[1] = general
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_KB, self._buf)
|
||||
if release:
|
||||
time.sleep_ms(10)
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_KB, bytes(4))
|
||||
else:
|
||||
print("Warning: Please upgrade the coprocessor firmware to use this feature")
|
||||
|
||||
def hid_keyboard_str(self, string, delay=0):
|
||||
if self._version:
|
||||
for char in str(string):
|
||||
self._wreg(_BOT035_STR, ord(char) & 0xFF)
|
||||
time.sleep_ms(20 + delay)
|
||||
else:
|
||||
print("Warning: Please upgrade the coprocessor firmware to use this feature")
|
||||
|
||||
def hid_mouse(self, keys=0, move=(0, 0), wheel=0, release=True):
|
||||
if self._version:
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_MS, bytes([keys & 0x0F, move[0] & 0xFF, move[1] & 0xFF, wheel & 0xFF]))
|
||||
if release:
|
||||
time.sleep_ms(10)
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_MS, bytes(4))
|
||||
else:
|
||||
print("Warning: Please upgrade the coprocessor firmware to use this feature")
|
||||
|
||||
"""Graph module"""
|
||||
HEART =b'\x00\x0c\x1e?~\xfc~?\x1e\x0c\x00\x00'
|
||||
HEART_SMALL =b'\x00\x00\x0c\x1e<x<\x1e\x0c\x00\x00\x00'
|
||||
HAPPY =b'\x00\x06\x06\x10 @@ \x10\x06\x06\x00'
|
||||
SAD =b'\x04\x02\x02B \x10\x10 B\x02\x02\x04'
|
||||
SMILE =b'\x04\x02\x02$@\x80\x80@$\x02\x02\x04'
|
||||
ANGRY =b'\x01\x02\x84B!\x10\x10!B\x84\x02\x01'
|
||||
NO =b'\x00\x00\x00B$\x18\x18$B\x00\x00\x00'
|
||||
YES =b'\x00\x00\x10 @@ \x10\x08\x04\x02\x00'
|
||||
DOOR_OPEN =b'\x00\x00\xfe\xfd\x01\x01\x01\x01\x01\xfe\x00\x00'
|
||||
DOOR_OPENING =b'\x00\x00\xfe\x03\x03\x15\xf9\x01\x01\xfe\x00\x00'
|
||||
DOOR_CLOSE =b'\x00\x00\xfe\x03\x03\x03\x13\x13\xff\xfe\x00\x00'
|
||||
"""
|
||||
MINI_WCH
|
||||
|
||||
Micropython library for the MINI_WCH(TOUCH*2, MIC*1, Buzzer*1, PWM*2, Matrix8x12, HID)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
import time
|
||||
from esp import flash_read
|
||||
from micropython import const
|
||||
from framebuf import FrameBuffer, MONO_VLSB
|
||||
|
||||
_BOT035_ADDRESS = const(0x13)
|
||||
_BOT5_TOUCH = const(0x01)
|
||||
_BOT035_MIC = const(0x05)
|
||||
_BOT035_SPK = const(0x07)
|
||||
_BOT035_PWM = const(0x0B)
|
||||
_BOT035_FLAG = const(0x0F)
|
||||
_BOT035_LEDS = const(0x10)
|
||||
_BOT035_PGA = const(0x20)
|
||||
_BOT035_KB = const(0x1C)
|
||||
_BOT035_MS = const(0x20)
|
||||
_BOT035_STR = const(0x24)
|
||||
_FONT_W = const(5)
|
||||
_FONT_H = const(8)
|
||||
_LEDS_W = const(12)
|
||||
_LEDS_H = const(8)
|
||||
_FONT5x8_CODE = const(b'\x05\x08\x00\x00\x00\x00\x00\x00\x00_\x00\x00\x00\x07\x00\x07\x00\x14\x7f\x14\x7f\x14$*\x7f*\x12#\x13\x08db6IV P\x00\x08\x07\x03\x00\x00\x1c"A\x00\x00A"\x1c\x00*\x1c\x7f\x1c*\x08\x08>\x08\x08\x00\x80p0\x00\x08\x08\x08\x08\x08\x00\x00``\x00 \x10\x08\x04\x02>QIE>\x00B\x7f@\x00rIIIF!AIM3\x18\x14\x12\x7f\x10\'EEE9<JII1A!\x11\t\x076III6FII)\x1e\x00\x00\x14\x00\x00\x00@4\x00\x00\x00\x08\x14"A\x14\x14\x14\x14\x14\x00A"\x14\x08\x02\x01Y\t\x06>A]YN|\x12\x11\x12|\x7fIII6>AAA"\x7fAAA>\x7fIIIA\x7f\t\t\t\x01>AAQs\x7f\x08\x08\x08\x7f\x00A\x7fA\x00 @A?\x01\x7f\x08\x14"A\x7f@@@@\x7f\x02\x1c\x02\x7f\x7f\x04\x08\x10\x7f>AAA>\x7f\t\t\t\x06>AQ!^\x7f\t\x19)F&III2\x03\x01\x7f\x01\x03?@@@?\x1f @ \x1f?@8@?c\x14\x08\x14c\x03\x04x\x04\x03aYIMC\x00\x7fAAA\x02\x04\x08\x10 \x00AAA\x7f\x04\x02\x01\x02\x04@@@@@\x00\x03\x07\x08\x00 TTx@\x7f(DD88DDD(8DD(\x7f8TTT\x18\x00\x08~\t\x02\x18\xa4\xa4\x9cx\x7f\x08\x04\x04x\x00D}@\x00 @@=\x00\x7f\x10(D\x00\x00A\x7f@\x00|\x04x\x04x|\x08\x04\x04x8DDD8\xfc\x18$$\x18\x18$$\x18\xfc|\x08\x04\x04\x08HTTT$\x04\x04?D$<@@ |\x1c @ \x1c<@0@<D(\x10(DL\x90\x90\x90|DdTLD\x00\x086A\x00\x00\x00w\x00\x00\x00A6\x08\x00\x02\x01\x02\x04\x02<&#&<')
|
||||
_Uincode_ADDR = const(0x3A0000)
|
||||
|
||||
class BOT035(FrameBuffer):
|
||||
def __init__(self, i2c_bus, brightness=0.8):
|
||||
self._i2c= i2c_bus
|
||||
self._buffer = bytearray(12)
|
||||
self._brightness = brightness
|
||||
self._touchs = [self.touch(0), self.touch(1)]
|
||||
self._version = True if self._rreg(0x00) == 0x27 else False
|
||||
super().__init__(self._buffer, _LEDS_W, _LEDS_H, MONO_VLSB)
|
||||
self.reset()
|
||||
self.show()
|
||||
|
||||
def _chardata(self, ch):
|
||||
'''Ascall code font reading data'''
|
||||
if 0x20 <= ord(ch) <= 0x7f:
|
||||
char_index = 2 + (ord(ch)-32) * _FONT_W
|
||||
return _FONT5x8_CODE[char_index : char_index + _FONT_W]
|
||||
else:
|
||||
raise ValueError("Cannot display characters other than ASCLL code")
|
||||
|
||||
def _uincode(self, ch):
|
||||
'''uincode code font reading data'''
|
||||
uni = ord(ch)
|
||||
if 0x20 <= uni <= 0x2642 :
|
||||
_address = 0x28 + (uni - 0x20) * 4
|
||||
elif 0x3001 <= uni <= 0x9fa0 :
|
||||
_address = 0x98b4 + (uni - 0x3001) * 4
|
||||
elif 0xff01 <= uni <= 0xffe5 :
|
||||
_address = 0x25734 + (uni - 0xff01) * 4
|
||||
else:
|
||||
raise ValueError("Cannot display characters other than GB2312 code")
|
||||
buffer = bytearray(4)
|
||||
flash_read(_Uincode_ADDR + _address, buffer)
|
||||
font_info = buffer[3] << 24 | buffer[2] << 16 | buffer[1] << 8 | buffer[0]
|
||||
font_address = font_info & 0X3FFFFFF
|
||||
font_width = font_info >> 26
|
||||
buffer = bytearray( 12 * (font_width // 8 + 1))
|
||||
flash_read(_Uincode_ADDR + font_address, buffer)
|
||||
return buffer, font_width
|
||||
|
||||
def shift(self, x, y, rotate=False):
|
||||
"""Shift pixels by x and y"""
|
||||
if x > 0: # Shift Right
|
||||
for _ in range(x):
|
||||
for row in range(0, _LEDS_H):
|
||||
last_pixel = self.pixel(_LEDS_W - 1, row) if rotate else 0
|
||||
for col in range(_LEDS_W - 1, 0, -1):
|
||||
self.pixel(col, row, self.pixel(col - 1, row))
|
||||
self.pixel(0, row, last_pixel)
|
||||
elif x < 0: # Shift Left
|
||||
for _ in range(-x):
|
||||
for row in range(0, _LEDS_H):
|
||||
last_pixel = self.pixel(0, row) if rotate else 0
|
||||
for col in range(0, _LEDS_W - 1):
|
||||
self.pixel(col, row, self.pixel(col + 1, row))
|
||||
self.pixel(_LEDS_W - 1, row, last_pixel)
|
||||
if y > 0: # Shift Up
|
||||
for _ in range(y):
|
||||
for col in range(0, _LEDS_W):
|
||||
last_pixel = self.pixel(col, _LEDS_H - 1) if rotate else 0
|
||||
for row in range(_LEDS_H - 1, 0, -1):
|
||||
self.pixel(col, row, self.pixel(col, row - 1))
|
||||
self.pixel(col, 0, last_pixel)
|
||||
elif y < 0: # Shift Down
|
||||
for _ in range(-y):
|
||||
for col in range(0, _LEDS_W):
|
||||
last_pixel = self.pixel(col, 0) if rotate else 0
|
||||
for row in range(0, _LEDS_H - 1):
|
||||
self.pixel(col, row, self.pixel(col, row + 1))
|
||||
self.pixel(col, _LEDS_H - 1, last_pixel)
|
||||
self.show()
|
||||
|
||||
def shift_right(self, num, rotate=False):
|
||||
"""Shift all pixels right"""
|
||||
self.shift(num, 0, rotate)
|
||||
|
||||
def shift_left(self, num, rotate=False):
|
||||
"""Shift all pixels left"""
|
||||
self.shift(-num, 0, rotate)
|
||||
|
||||
def shift_up(self, num, rotate=False):
|
||||
"""Shift all pixels up"""
|
||||
self.shift(0, -num, rotate)
|
||||
|
||||
def shift_down(self, num, rotate=False):
|
||||
"""Shift all pixels down"""
|
||||
self.shift(0, num, rotate)
|
||||
|
||||
def map_invert(self, own):
|
||||
"""Graph invert operation"""
|
||||
result = bytearray()
|
||||
for i in range(len(own)):
|
||||
result.append(~ own[i])
|
||||
return result
|
||||
|
||||
def map_add(self, own, other):
|
||||
"""Graph union operation"""
|
||||
result = bytearray()
|
||||
for i in range(min(len(own), len(other))):
|
||||
result.append(own[i] | other[i])
|
||||
return result
|
||||
|
||||
def map_sub(self, own, other):
|
||||
"""Graphic subtraction operation"""
|
||||
result = bytearray()
|
||||
for i in range(min(len(own), len(other))):
|
||||
result.append((own[i] ^ other[i]) & own[i])
|
||||
return result
|
||||
|
||||
def set_buffer(self, buffer):
|
||||
for i in range(len(buffer)):
|
||||
self._buffer[i] = self._buffer[i] | buffer[i]
|
||||
|
||||
def _ascall_bitmap(self, buffer, x=0):
|
||||
if -_FONT_W <= x <= _LEDS_W:
|
||||
for _x in range(_FONT_W):
|
||||
for _y in range(_FONT_H):
|
||||
if (buffer[_x] >> _y) & 0x1:
|
||||
self.pixel(x + _x, _y, 1)
|
||||
|
||||
def _uincode_bitmap(self, buffer, x=0):
|
||||
_buffer, width = buffer
|
||||
if -width < x < _LEDS_H:
|
||||
for _y in range(12):
|
||||
for _x in range(width):
|
||||
if _buffer[_y * ((width + 7) // 8) + _x // 8] & (0x80 >> (_x & 7)):
|
||||
self.pixel(_y, _LEDS_H - (x + _x), 1)
|
||||
|
||||
def shows(self, data, space=1, center=True):
|
||||
"""Display character"""
|
||||
if data is not None:
|
||||
self.fill(0)
|
||||
if type(data) in [bytes, bytearray]:
|
||||
self.set_buffer(data)
|
||||
self.show()
|
||||
else:
|
||||
data = str(data)
|
||||
x = (_LEDS_W - len(data) * (_FONT_W + space) + space) // 2 if center else 0
|
||||
for char in data:
|
||||
self._ascall_bitmap(self._chardata(char), x)
|
||||
x = _FONT_W + x + space
|
||||
self.show()
|
||||
|
||||
def frame(self, data, delay=500):
|
||||
"""Display one frame per character"""
|
||||
if data is not None:
|
||||
data = str(data)
|
||||
for char in data:
|
||||
self.fill(0)
|
||||
self._ascall_bitmap(self._chardata(char), (_LEDS_W - _FONT_W) // 2)
|
||||
self.show()
|
||||
time.sleep_ms(delay)
|
||||
|
||||
def scroll(self, data, space=0, speed=100):
|
||||
"""Scrolling characters"""
|
||||
if data is not None:
|
||||
data = str(data)
|
||||
uincode = False
|
||||
for char in data:
|
||||
if ord(char) >= 0xff:
|
||||
uincode =True
|
||||
break
|
||||
if uincode:
|
||||
font_buffer = []
|
||||
str_len = 0
|
||||
for c in data:
|
||||
_buffer = self._uincode(c)
|
||||
font_buffer.append(_buffer)
|
||||
str_len = str_len + _buffer[1] + space
|
||||
for i in range(str_len + _LEDS_H - space):
|
||||
x = _LEDS_H - i
|
||||
self.fill(0)
|
||||
for buffer in font_buffer:
|
||||
self._uincode_bitmap(buffer, x)
|
||||
x = buffer[1] + x + space
|
||||
self.show()
|
||||
time.sleep_ms(speed)
|
||||
else:
|
||||
str_len = len(data) * (_FONT_W + space) - space
|
||||
for i in range(str_len + _LEDS_W + 1):
|
||||
x = _LEDS_W -i
|
||||
self.fill(0)
|
||||
for char in data:
|
||||
self._ascall_bitmap(self._chardata(char), x)
|
||||
x = _FONT_W + x + space
|
||||
self.show()
|
||||
time.sleep_ms(speed)
|
||||
|
||||
def _wreg(self, reg, val):
|
||||
'''Write memory address'''
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, reg, val.to_bytes(1, 'little'))
|
||||
|
||||
def _rreg(self, reg, nbytes=1):
|
||||
'''Read memory address'''
|
||||
self._i2c.writeto(_BOT035_ADDRESS, reg.to_bytes(1, 'little'))
|
||||
return self._i2c.readfrom(_BOT035_ADDRESS, nbytes)[0]
|
||||
|
||||
def reset(self):
|
||||
"""Reset SPK, PWM, HID registers to default state"""
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_SPK, b'\x0A\x00\x00\x00\x20\x4E\x64\x64')
|
||||
if self._version: self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_KB, bytes(9))
|
||||
|
||||
def get_brightness(self):
|
||||
return self._brightness
|
||||
|
||||
def set_brightness(self, brightness):
|
||||
if not 0.0 <= brightness <= 1.0:
|
||||
raise ValueError("Brightness must be a decimal number in the range: 0.0-1.0")
|
||||
self._brightness = brightness
|
||||
self._wreg(_BOT035_FLAG, _BOT035_PGA | round(10 * brightness))
|
||||
|
||||
def show(self):
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_LEDS, self._buffer)
|
||||
|
||||
def buzzer(self, duty=None, freq=None):
|
||||
if duty is not None:
|
||||
duty = max(min(duty, 100), 0)
|
||||
self._wreg(_BOT035_SPK + 2, int(duty))
|
||||
if freq is not None:
|
||||
freq = max(min(freq, 65535), 10)
|
||||
self._wreg(_BOT035_SPK, freq & 0xFF)
|
||||
self._wreg(_BOT035_SPK + 1, freq >> 8)
|
||||
if freq is None and duty is None:
|
||||
return self._rreg(_BOT035_SPK + 2), self._rreg(_BOT035_SPK) | self._rreg(_BOT035_SPK + 1) << 8
|
||||
|
||||
def usben(self, index=1, duty=None, freq=None):
|
||||
index = max(min(index, 2), 1) - 1
|
||||
if duty is not None:
|
||||
duty = max(min(duty, 100), 0)
|
||||
self._wreg(_BOT035_PWM + index + 2, int(duty))
|
||||
if freq is not None:
|
||||
freq = max(min(freq, 65535), 10)
|
||||
self._wreg(_BOT035_PWM, freq & 0xFF)
|
||||
self._wreg(_BOT035_PWM + 1, freq >> 8)
|
||||
if freq is None and duty is None:
|
||||
return self._rreg(_BOT035_PWM + index + 2), self._rreg(_BOT035_PWM) | self._rreg(_BOT035_PWM + 1) << 8
|
||||
|
||||
def touch(self, index, value=None):
|
||||
index = max(min(index, 1), 0)
|
||||
touch = 4095 - (self._rreg(_BOT5_TOUCH + index * 2) | self._rreg(_BOT5_TOUCH + index * 2 + 1) << 8)
|
||||
return touch > value if value else touch
|
||||
|
||||
def touched(self, index, value=600):
|
||||
return self.touch(index, value)
|
||||
|
||||
def touch_slide(self):
|
||||
values = []
|
||||
for i in range(30):
|
||||
values.append((self.touch(1) - self._touchs[1]) - (self.touch(0) - self._touchs[0]))
|
||||
return round(sorted(values)[15] / 10)
|
||||
|
||||
def soundlevel(self):
|
||||
values = []
|
||||
for i in range(50):
|
||||
values.append(self._rreg(_BOT035_MIC) | self._rreg(_BOT035_MIC + 1) << 8)
|
||||
values = sorted(values)
|
||||
return values[-10] - values[10]
|
||||
|
||||
def hid_keyboard(self, special=0, general=0, release=True):
|
||||
if self._version:
|
||||
self._buf = bytearray(4)
|
||||
self._buf[0] = special
|
||||
if type(general) in (tuple, list):
|
||||
for i in range(len(general)):
|
||||
if i > 2: break
|
||||
self._buf[i + 1] = general[i]
|
||||
else:
|
||||
self._buf[1] = general
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_KB, self._buf)
|
||||
if release:
|
||||
time.sleep_ms(10)
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_KB, bytes(4))
|
||||
else:
|
||||
print("Warning: Please upgrade the coprocessor firmware to use this feature")
|
||||
|
||||
def hid_keyboard_str(self, string, delay=0):
|
||||
if self._version:
|
||||
for char in str(string):
|
||||
self._wreg(_BOT035_STR, ord(char) & 0xFF)
|
||||
time.sleep_ms(20 + delay)
|
||||
else:
|
||||
print("Warning: Please upgrade the coprocessor firmware to use this feature")
|
||||
|
||||
def hid_mouse(self, keys=0, move=(0, 0), wheel=0, release=True):
|
||||
if self._version:
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_MS, bytes([keys & 0x0F, move[0] & 0xFF, move[1] & 0xFF, wheel & 0xFF]))
|
||||
if release:
|
||||
time.sleep_ms(10)
|
||||
self._i2c.writeto_mem(_BOT035_ADDRESS, _BOT035_MS, bytes(4))
|
||||
else:
|
||||
print("Warning: Please upgrade the coprocessor firmware to use this feature")
|
||||
|
||||
"""Graph module"""
|
||||
HEART =b'\x00\x0c\x1e?~\xfc~?\x1e\x0c\x00\x00'
|
||||
HEART_SMALL =b'\x00\x00\x0c\x1e<x<\x1e\x0c\x00\x00\x00'
|
||||
HAPPY =b'\x00\x06\x06\x10 @@ \x10\x06\x06\x00'
|
||||
SAD =b'\x04\x02\x02B \x10\x10 B\x02\x02\x04'
|
||||
SMILE =b'\x04\x02\x02$@\x80\x80@$\x02\x02\x04'
|
||||
ANGRY =b'\x01\x02\x84B!\x10\x10!B\x84\x02\x01'
|
||||
NO =b'\x00\x00\x00B$\x18\x18$B\x00\x00\x00'
|
||||
YES =b'\x00\x00\x10 @@ \x10\x08\x04\x02\x00'
|
||||
DOOR_OPEN =b'\x00\x00\xfe\xfd\x01\x01\x01\x01\x01\xfe\x00\x00'
|
||||
DOOR_OPENING =b'\x00\x00\xfe\x03\x03\x15\xf9\x01\x01\xfe\x00\x00'
|
||||
DOOR_CLOSE =b'\x00\x00\xfe\x03\x03\x03\x13\x13\xff\xfe\x00\x00'
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
"""
|
||||
MINI G2 -MixGo MINI EXT G2
|
||||
|
||||
MicroPython library for the MINI G2 (Expansion board for MixGo MINI)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
|
||||
import gc
|
||||
from machine import Pin, SoftI2C
|
||||
|
||||
'''i2c-extboard'''
|
||||
ext_i2c = SoftI2C(scl=Pin(7), sda=Pin(8), freq=400000)
|
||||
|
||||
'''RFID_Sensor'''
|
||||
try :
|
||||
import rc522
|
||||
ext_rfid = rc522.RC522(ext_i2c)
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with SI522A (RFID) or",e)
|
||||
|
||||
'''Reclaim memory'''
|
||||
gc.collect()
|
||||
"""
|
||||
MINI G2 -MixGo MINI EXT G2
|
||||
|
||||
MicroPython library for the MINI G2 (Expansion board for MixGo MINI)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
|
||||
import gc
|
||||
from machine import Pin, SoftI2C
|
||||
|
||||
'''i2c-extboard'''
|
||||
ext_i2c = SoftI2C(scl=Pin(7), sda=Pin(8), freq=400000)
|
||||
|
||||
'''RFID_Sensor'''
|
||||
try :
|
||||
import rc522
|
||||
ext_rfid = rc522.RC522(ext_i2c)
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with SI522A (RFID) or",e)
|
||||
|
||||
'''Reclaim memory'''
|
||||
gc.collect()
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
"""
|
||||
mixgo_mini onboard resources
|
||||
|
||||
Micropython library for the mixgo_mini onboard resources
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
import time, gc
|
||||
from esp32 import mcu_temperature
|
||||
from machine import Pin, ADC, RTC, SoftI2C
|
||||
|
||||
'''Reclaim memory'''
|
||||
gc.collect()
|
||||
|
||||
'''RTC'''
|
||||
rtc_clock = RTC()
|
||||
|
||||
'''I2C-onboard'''
|
||||
onboard_i2c = SoftI2C(scl=Pin(10), sda=Pin(18), freq=400000)
|
||||
#onboard_i2c_scan = onboard_i2c.scan()
|
||||
|
||||
'''ACC-Sensor'''
|
||||
try :
|
||||
import sc7a20
|
||||
onboard_acc = sc7a20.SC7A20(onboard_i2c)
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with SC7A20H (ACC) or",e)
|
||||
|
||||
'''ALS_PS-Sensor'''
|
||||
try :
|
||||
import ap3216c
|
||||
onboard_als = ap3216c.AP3216C(onboard_i2c)
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with AP3216C (ALS&PS) or",e)
|
||||
|
||||
'''BOT035-Sensor'''
|
||||
try :
|
||||
import mini_bot
|
||||
onboard_bot = mini_bot.BOT035(onboard_i2c)
|
||||
onboard_matrix = onboard_bot
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with BOT035 (Coprocessor) or",e)
|
||||
|
||||
'''BPS-Sensor'''
|
||||
# if 0x77 in onboard_i2c_scan:
|
||||
# try :
|
||||
# import spl06_001
|
||||
# onboard_bps = spl06_001.SPL06(onboard_i2c)
|
||||
# except Exception as e:
|
||||
# print("Warning: Failed to communicate with SPL06-001 (BPS) or",e)
|
||||
|
||||
'''THS-Sensor'''
|
||||
# if 0x70 in onboard_i2c_scan:
|
||||
# try :
|
||||
# import shtc3
|
||||
# onboard_ths = shtc3.SHTC3(onboard_i2c)
|
||||
# except Exception as e:
|
||||
# print("Warning: Failed to communicate with GXHTC3 (THS) or",e)
|
||||
|
||||
'''MGS-Sensor'''
|
||||
# if 0x30 in onboard_i2c_scan:
|
||||
# try :
|
||||
# import mmc5603
|
||||
# onboard_mgs = mmc5603.MMC5603(onboard_i2c)
|
||||
# except Exception as e:
|
||||
# print("Warning: Failed to communicate with MMC5603 (MGS) or",e)
|
||||
|
||||
'''MCU_temperature'''
|
||||
def onboard_temperature():
|
||||
return mcu_temperature()
|
||||
|
||||
'''2RGB_WS2812'''
|
||||
from ws2812x import NeoPixel
|
||||
onboard_rgb = NeoPixel(Pin(9), 2)
|
||||
|
||||
'''1Buzzer-Music'''
|
||||
from musicx import MIDI
|
||||
onboard_music = MIDI(onboard_bot)
|
||||
|
||||
'''5KEY_Sensor'''
|
||||
class KEYSensor:
|
||||
def __init__(self, pin, range):
|
||||
self.pin = pin
|
||||
self.adc = ADC(Pin(pin), atten=ADC.ATTN_0DB)
|
||||
self.range = range
|
||||
self.flag = True
|
||||
|
||||
def _value(self):
|
||||
values = []
|
||||
for _ in range(50):
|
||||
values.append(self.adc.read())
|
||||
time.sleep_us(2)
|
||||
return (self.range-200) < min(values) < (self.range+200)
|
||||
|
||||
def get_presses(self, delay = 1):
|
||||
last_time,presses = time.time(), 0
|
||||
while time.time() < last_time + delay:
|
||||
time.sleep_ms(50)
|
||||
if self.was_pressed():
|
||||
presses += 1
|
||||
return presses
|
||||
|
||||
def is_pressed(self):
|
||||
return self._value()
|
||||
|
||||
def was_pressed(self):
|
||||
if(self._value() != self.flag):
|
||||
self.flag = self._value()
|
||||
if self.flag :
|
||||
return True
|
||||
else:
|
||||
return False
|
||||
|
||||
def irq(self, handler, trigger):
|
||||
Pin(self.pin, Pin.IN).irq(handler = handler, trigger = trigger)
|
||||
|
||||
'''1KEY_Button'''
|
||||
class Button(KEYSensor):
|
||||
def __init__(self, pin):
|
||||
self.pin = pin
|
||||
self.key = Pin(pin, Pin.IN)
|
||||
self.flag = True
|
||||
|
||||
def _value(self):
|
||||
return not self.key.value()
|
||||
|
||||
B1key = Button(9)
|
||||
B2key = KEYSensor(0, 0)
|
||||
A1key = KEYSensor(0, 2100)
|
||||
A2key = KEYSensor(0, 1500)
|
||||
A3key = KEYSensor(0, 800)
|
||||
A4key = KEYSensor(0, 2700)
|
||||
|
||||
'''2LED-Multiplex RGB'''
|
||||
class LED:
|
||||
def __init__(self, rgb, num=2, color=7):
|
||||
self._rgb = rgb
|
||||
self._col = [color] * num
|
||||
self._color = ((0, 0, 0), (1, 0, 0), (0, 1, 0), (0, 0, 1), (1, 1, 0), (0, 1, 1), (1, 0, 1), (1, 1, 1))
|
||||
|
||||
def setbrightness(self, index, value):
|
||||
self._rgb[index - 1] = (value if self._color[self._col[index-1]][0] else 0,
|
||||
value if self._color[self._col[index-1]][1] else 0,
|
||||
value if self._color[self._col[index-1]][2] else 0)
|
||||
self._rgb.write()
|
||||
|
||||
def getbrightness(self, index):
|
||||
color = self._rgb[index - 1]
|
||||
return color[0] | color[1] | color[2]
|
||||
|
||||
def setonoff(self, index, value):
|
||||
if value == -1:
|
||||
if self.getbrightness(index) < 50:
|
||||
self.setbrightness(index, 100)
|
||||
else:
|
||||
self.setbrightness(index, 0)
|
||||
elif value == 1:
|
||||
self.setbrightness(index, 100)
|
||||
elif value == 0:
|
||||
self.setbrightness(index, 0)
|
||||
|
||||
def getonoff(self, index):
|
||||
return True if self.getbrightness(index) >= 50 else False
|
||||
|
||||
def setcolor(self, index, color, value=50):
|
||||
self._col[index-1] = color
|
||||
self.setbrightness(index, value)
|
||||
|
||||
onboard_led = LED(onboard_rgb)
|
||||
|
||||
'''Reclaim memory'''
|
||||
gc.collect()
|
||||
"""
|
||||
mixgo_mini onboard resources
|
||||
|
||||
Micropython library for the mixgo_mini onboard resources
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
import time, gc
|
||||
from esp32 import mcu_temperature
|
||||
from machine import Pin, ADC, RTC, SoftI2C
|
||||
|
||||
'''Reclaim memory'''
|
||||
gc.collect()
|
||||
|
||||
'''RTC'''
|
||||
rtc_clock = RTC()
|
||||
|
||||
'''I2C-onboard'''
|
||||
onboard_i2c = SoftI2C(scl=Pin(10), sda=Pin(18), freq=400000)
|
||||
#onboard_i2c_scan = onboard_i2c.scan()
|
||||
|
||||
'''ACC-Sensor'''
|
||||
try :
|
||||
import sc7a20
|
||||
onboard_acc = sc7a20.SC7A20(onboard_i2c)
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with SC7A20H (ACC) or",e)
|
||||
|
||||
'''ALS_PS-Sensor'''
|
||||
try :
|
||||
import ap3216c
|
||||
onboard_als = ap3216c.AP3216C(onboard_i2c)
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with AP3216C (ALS&PS) or",e)
|
||||
|
||||
'''BOT035-Sensor'''
|
||||
try :
|
||||
import mini_bot
|
||||
onboard_bot = mini_bot.BOT035(onboard_i2c)
|
||||
onboard_matrix = onboard_bot
|
||||
except Exception as e:
|
||||
print("Warning: Failed to communicate with BOT035 (Coprocessor) or",e)
|
||||
|
||||
'''BPS-Sensor'''
|
||||
# if 0x77 in onboard_i2c_scan:
|
||||
# try :
|
||||
# import spl06_001
|
||||
# onboard_bps = spl06_001.SPL06(onboard_i2c)
|
||||
# except Exception as e:
|
||||
# print("Warning: Failed to communicate with SPL06-001 (BPS) or",e)
|
||||
|
||||
'''THS-Sensor'''
|
||||
# if 0x70 in onboard_i2c_scan:
|
||||
# try :
|
||||
# import shtc3
|
||||
# onboard_ths = shtc3.SHTC3(onboard_i2c)
|
||||
# except Exception as e:
|
||||
# print("Warning: Failed to communicate with GXHTC3 (THS) or",e)
|
||||
|
||||
'''MGS-Sensor'''
|
||||
# if 0x30 in onboard_i2c_scan:
|
||||
# try :
|
||||
# import mmc5603
|
||||
# onboard_mgs = mmc5603.MMC5603(onboard_i2c)
|
||||
# except Exception as e:
|
||||
# print("Warning: Failed to communicate with MMC5603 (MGS) or",e)
|
||||
|
||||
'''MCU_temperature'''
|
||||
def onboard_temperature():
|
||||
return mcu_temperature()
|
||||
|
||||
'''2RGB_WS2812'''
|
||||
from ws2812x import NeoPixel
|
||||
onboard_rgb = NeoPixel(Pin(9), 2)
|
||||
|
||||
'''1Buzzer-Music'''
|
||||
from musicx import MIDI
|
||||
onboard_music = MIDI(onboard_bot)
|
||||
|
||||
'''5KEY_Sensor'''
|
||||
class KEYSensor:
|
||||
def __init__(self, pin, range):
|
||||
self.pin = pin
|
||||
self.adc = ADC(Pin(pin), atten=ADC.ATTN_0DB)
|
||||
self.range = range
|
||||
self.flag = True
|
||||
|
||||
def _value(self):
|
||||
values = []
|
||||
for _ in range(50):
|
||||
values.append(self.adc.read())
|
||||
time.sleep_us(2)
|
||||
return (self.range-200) < min(values) < (self.range+200)
|
||||
|
||||
def get_presses(self, delay = 1):
|
||||
last_time,presses = time.time(), 0
|
||||
while time.time() < last_time + delay:
|
||||
time.sleep_ms(50)
|
||||
if self.was_pressed():
|
||||
presses += 1
|
||||
return presses
|
||||
|
||||
def is_pressed(self):
|
||||
return self._value()
|
||||
|
||||
def was_pressed(self):
|
||||
if(self._value() != self.flag):
|
||||
self.flag = self._value()
|
||||
if self.flag :
|
||||
return True
|
||||
else:
|
||||
return False
|
||||
|
||||
def irq(self, handler, trigger):
|
||||
Pin(self.pin, Pin.IN).irq(handler = handler, trigger = trigger)
|
||||
|
||||
'''1KEY_Button'''
|
||||
class Button(KEYSensor):
|
||||
def __init__(self, pin):
|
||||
self.pin = pin
|
||||
self.key = Pin(pin, Pin.IN)
|
||||
self.flag = True
|
||||
|
||||
def _value(self):
|
||||
return not self.key.value()
|
||||
|
||||
B1key = Button(9)
|
||||
B2key = KEYSensor(0, 0)
|
||||
A1key = KEYSensor(0, 2100)
|
||||
A2key = KEYSensor(0, 1500)
|
||||
A3key = KEYSensor(0, 800)
|
||||
A4key = KEYSensor(0, 2700)
|
||||
|
||||
'''2LED-Multiplex RGB'''
|
||||
class LED:
|
||||
def __init__(self, rgb, num=2, color=7):
|
||||
self._rgb = rgb
|
||||
self._col = [color] * num
|
||||
self._color = ((0, 0, 0), (1, 0, 0), (0, 1, 0), (0, 0, 1), (1, 1, 0), (0, 1, 1), (1, 0, 1), (1, 1, 1))
|
||||
|
||||
def setbrightness(self, index, value):
|
||||
self._rgb[index - 1] = (value if self._color[self._col[index-1]][0] else 0,
|
||||
value if self._color[self._col[index-1]][1] else 0,
|
||||
value if self._color[self._col[index-1]][2] else 0)
|
||||
self._rgb.write()
|
||||
|
||||
def getbrightness(self, index):
|
||||
color = self._rgb[index - 1]
|
||||
return color[0] | color[1] | color[2]
|
||||
|
||||
def setonoff(self, index, value):
|
||||
if value == -1:
|
||||
if self.getbrightness(index) < 50:
|
||||
self.setbrightness(index, 100)
|
||||
else:
|
||||
self.setbrightness(index, 0)
|
||||
elif value == 1:
|
||||
self.setbrightness(index, 100)
|
||||
elif value == 0:
|
||||
self.setbrightness(index, 0)
|
||||
|
||||
def getonoff(self, index):
|
||||
return True if self.getbrightness(index) >= 50 else False
|
||||
|
||||
def setcolor(self, index, color, value=50):
|
||||
self._col[index-1] = color
|
||||
self.setbrightness(index, value)
|
||||
|
||||
onboard_led = LED(onboard_rgb)
|
||||
|
||||
'''Reclaim memory'''
|
||||
gc.collect()
|
||||
|
||||
@@ -1,123 +1,123 @@
|
||||
"""
|
||||
Music buzzer(BOT)
|
||||
|
||||
Micropython library for the Music buzzer(Coprocessor I2C communication)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
from time import sleep_ms
|
||||
|
||||
normal_tone = {
|
||||
'A1': 55, 'B1': 62, 'C1': 33, 'D1': 37, 'E1': 41, 'F1': 44, 'G1': 49,
|
||||
'A2': 110, 'B2': 123, 'C2': 65, 'D2': 73, 'E2': 82, 'F2': 87, 'G2': 98,
|
||||
'A3': 220, 'B3': 247, 'C3': 131, 'D3': 147, 'E3': 165, 'F3': 175, 'G3': 196,
|
||||
'A4': 440, 'B4': 494, 'C4': 262, 'D4': 294, 'E4': 330, 'F4': 349, 'G4': 392,
|
||||
'A5': 880, 'B5': 988, 'C5': 523, 'D5': 587, 'E5': 659, 'F5': 698, 'G5': 784,
|
||||
'A6': 1760, 'B6': 1976, 'C6': 1047, 'D6': 1175, 'E6': 1319, 'F6': 1397, 'G6': 1568,
|
||||
'A7': 3520, 'B7': 3951, 'C7': 2093, 'D7': 2349, 'E7': 2637, 'F7': 2794, 'G7': 3135,
|
||||
'A8': 7040, 'B8': 7902, 'C8': 4186, 'D8': 4699, 'E8': 5274, 'F8': 5588, 'G8': 6271,
|
||||
'A9': 14080, 'B9': 15804 }
|
||||
|
||||
Letter = 'ABCDEFG#R'
|
||||
|
||||
class MIDI():
|
||||
def __init__(self, bus, volume=100):
|
||||
self.reset()
|
||||
self._bus = bus
|
||||
self._volume = volume // 5
|
||||
|
||||
def set_volume(self, volume):
|
||||
self._volume = max(min(volume, 100), 0) // 5
|
||||
|
||||
def set_tempo(self, ticks=4, bpm=120):
|
||||
self.ticks = ticks
|
||||
self.bpm = bpm
|
||||
self.beat = 60000 / self.bpm / self.ticks
|
||||
|
||||
def set_octave(self, octave=4):
|
||||
self.octave = octave
|
||||
|
||||
def set_duration(self, duration=4):
|
||||
self.duration = duration
|
||||
|
||||
def get_tempo(self):
|
||||
return (self.ticks, self.bpm)
|
||||
|
||||
def get_octave(self):
|
||||
return self.octave
|
||||
|
||||
def get_duration(self):
|
||||
return self.duration
|
||||
|
||||
def reset(self):
|
||||
self.set_duration()
|
||||
self.set_octave()
|
||||
self.set_tempo()
|
||||
|
||||
def parse(self, tone, dict):
|
||||
time = self.beat * self.duration
|
||||
pos = tone.find(':')
|
||||
if pos != -1:
|
||||
time = self.beat * int(tone[(pos + 1):])
|
||||
tone = tone[:pos]
|
||||
freq, tone_size = 1, len(tone)
|
||||
if 'R' in tone:
|
||||
freq = 400000
|
||||
elif tone_size == 1:
|
||||
freq = dict[tone[0] + str(self.octave)]
|
||||
elif tone_size == 2:
|
||||
freq = dict[tone]
|
||||
self.set_octave(tone[1:])
|
||||
return int(freq), int(time)
|
||||
|
||||
def midi(self, tone):
|
||||
pos = tone.find('#')
|
||||
if pos != -1:
|
||||
return self.parse(tone.replace('#', ''), normal_tone)
|
||||
pos = tone.find('B')
|
||||
if pos != -1 and pos != 0:
|
||||
return self.parse(tone.replace('B', ''), normal_tone)
|
||||
return self.parse(tone, normal_tone)
|
||||
|
||||
def set_default(self, tone):
|
||||
pos = tone.find(':')
|
||||
if pos != -1:
|
||||
self.set_duration(int(tone[(pos + 1):]))
|
||||
tone = tone[:pos]
|
||||
|
||||
def play(self, tune, duration=None):
|
||||
if duration is None:
|
||||
self.set_default(tune[0])
|
||||
else:
|
||||
self.set_duration(duration)
|
||||
for tone in tune:
|
||||
tone = tone.upper()
|
||||
if tone[0] not in Letter:
|
||||
continue
|
||||
midi = self.midi(tone)
|
||||
self._bus.buzzer(self._volume, midi[0])
|
||||
sleep_ms(midi[1])
|
||||
self._bus.buzzer(0)
|
||||
sleep_ms(1)
|
||||
sleep_ms(10)
|
||||
|
||||
def pitch(self, freq):
|
||||
self._bus.buzzer(self._volume, int(freq))
|
||||
|
||||
def pitch_time(self, freq, delay):
|
||||
self._bus.buzzer(self._volume, int(freq))
|
||||
sleep_ms(delay)
|
||||
self._bus.buzzer(0)
|
||||
sleep_ms(10)
|
||||
|
||||
def stop(self):
|
||||
self._bus.buzzer(0)
|
||||
sleep_ms(10)
|
||||
|
||||
BA_DING=('b5:1','e6:3')
|
||||
JUMP_UP=('c5:1','d','e','f','g')
|
||||
JUMP_DOWN=('g5:1','f','e','d','c')
|
||||
POWER_UP=('g4:1','c5','e4','g5:2','e5:1','g5:3')
|
||||
POWER_DOWN=('g5:1','d#','c','g4:2','b:1','c5:3')
|
||||
DADADADUM=('r4:2','g','g','g','eb:8','r:2','f','f','f','d:8')
|
||||
BIRTHDAY=('c4:4','c:1','d:4','c:4','f','e:8','c:3','c:1','d:4','c:4','g','f:8','c:3','c:1','c5:4','a4','f','e','d','a#:3','a#:1','a:4','f','g','f:8')
|
||||
"""
|
||||
Music buzzer(BOT)
|
||||
|
||||
Micropython library for the Music buzzer(Coprocessor I2C communication)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
from time import sleep_ms
|
||||
|
||||
normal_tone = {
|
||||
'A1': 55, 'B1': 62, 'C1': 33, 'D1': 37, 'E1': 41, 'F1': 44, 'G1': 49,
|
||||
'A2': 110, 'B2': 123, 'C2': 65, 'D2': 73, 'E2': 82, 'F2': 87, 'G2': 98,
|
||||
'A3': 220, 'B3': 247, 'C3': 131, 'D3': 147, 'E3': 165, 'F3': 175, 'G3': 196,
|
||||
'A4': 440, 'B4': 494, 'C4': 262, 'D4': 294, 'E4': 330, 'F4': 349, 'G4': 392,
|
||||
'A5': 880, 'B5': 988, 'C5': 523, 'D5': 587, 'E5': 659, 'F5': 698, 'G5': 784,
|
||||
'A6': 1760, 'B6': 1976, 'C6': 1047, 'D6': 1175, 'E6': 1319, 'F6': 1397, 'G6': 1568,
|
||||
'A7': 3520, 'B7': 3951, 'C7': 2093, 'D7': 2349, 'E7': 2637, 'F7': 2794, 'G7': 3135,
|
||||
'A8': 7040, 'B8': 7902, 'C8': 4186, 'D8': 4699, 'E8': 5274, 'F8': 5588, 'G8': 6271,
|
||||
'A9': 14080, 'B9': 15804 }
|
||||
|
||||
Letter = 'ABCDEFG#R'
|
||||
|
||||
class MIDI():
|
||||
def __init__(self, bus, volume=100):
|
||||
self.reset()
|
||||
self._bus = bus
|
||||
self._volume = volume // 5
|
||||
|
||||
def set_volume(self, volume):
|
||||
self._volume = max(min(volume, 100), 0) // 5
|
||||
|
||||
def set_tempo(self, ticks=4, bpm=120):
|
||||
self.ticks = ticks
|
||||
self.bpm = bpm
|
||||
self.beat = 60000 / self.bpm / self.ticks
|
||||
|
||||
def set_octave(self, octave=4):
|
||||
self.octave = octave
|
||||
|
||||
def set_duration(self, duration=4):
|
||||
self.duration = duration
|
||||
|
||||
def get_tempo(self):
|
||||
return (self.ticks, self.bpm)
|
||||
|
||||
def get_octave(self):
|
||||
return self.octave
|
||||
|
||||
def get_duration(self):
|
||||
return self.duration
|
||||
|
||||
def reset(self):
|
||||
self.set_duration()
|
||||
self.set_octave()
|
||||
self.set_tempo()
|
||||
|
||||
def parse(self, tone, dict):
|
||||
time = self.beat * self.duration
|
||||
pos = tone.find(':')
|
||||
if pos != -1:
|
||||
time = self.beat * int(tone[(pos + 1):])
|
||||
tone = tone[:pos]
|
||||
freq, tone_size = 1, len(tone)
|
||||
if 'R' in tone:
|
||||
freq = 400000
|
||||
elif tone_size == 1:
|
||||
freq = dict[tone[0] + str(self.octave)]
|
||||
elif tone_size == 2:
|
||||
freq = dict[tone]
|
||||
self.set_octave(tone[1:])
|
||||
return int(freq), int(time)
|
||||
|
||||
def midi(self, tone):
|
||||
pos = tone.find('#')
|
||||
if pos != -1:
|
||||
return self.parse(tone.replace('#', ''), normal_tone)
|
||||
pos = tone.find('B')
|
||||
if pos != -1 and pos != 0:
|
||||
return self.parse(tone.replace('B', ''), normal_tone)
|
||||
return self.parse(tone, normal_tone)
|
||||
|
||||
def set_default(self, tone):
|
||||
pos = tone.find(':')
|
||||
if pos != -1:
|
||||
self.set_duration(int(tone[(pos + 1):]))
|
||||
tone = tone[:pos]
|
||||
|
||||
def play(self, tune, duration=None):
|
||||
if duration is None:
|
||||
self.set_default(tune[0])
|
||||
else:
|
||||
self.set_duration(duration)
|
||||
for tone in tune:
|
||||
tone = tone.upper()
|
||||
if tone[0] not in Letter:
|
||||
continue
|
||||
midi = self.midi(tone)
|
||||
self._bus.buzzer(self._volume, midi[0])
|
||||
sleep_ms(midi[1])
|
||||
self._bus.buzzer(0)
|
||||
sleep_ms(1)
|
||||
sleep_ms(10)
|
||||
|
||||
def pitch(self, freq):
|
||||
self._bus.buzzer(self._volume, int(freq))
|
||||
|
||||
def pitch_time(self, freq, delay):
|
||||
self._bus.buzzer(self._volume, int(freq))
|
||||
sleep_ms(delay)
|
||||
self._bus.buzzer(0)
|
||||
sleep_ms(10)
|
||||
|
||||
def stop(self):
|
||||
self._bus.buzzer(0)
|
||||
sleep_ms(10)
|
||||
|
||||
BA_DING=('b5:1','e6:3')
|
||||
JUMP_UP=('c5:1','d','e','f','g')
|
||||
JUMP_DOWN=('g5:1','f','e','d','c')
|
||||
POWER_UP=('g4:1','c5','e4','g5:2','e5:1','g5:3')
|
||||
POWER_DOWN=('g5:1','d#','c','g4:2','b:1','c5:3')
|
||||
DADADADUM=('r4:2','g','g','g','eb:8','r:2','f','f','f','d:8')
|
||||
BIRTHDAY=('c4:4','c:1','d:4','c:4','f','e:8','c:3','c:1','d:4','c:4','g','f:8','c:3','c:1','c5:4','a4','f','e','d','a#:3','a#:1','a:4','f','g','f:8')
|
||||
|
||||
@@ -1,94 +1,94 @@
|
||||
"""
|
||||
Radio-ESP-NOW(ESP32-C2)
|
||||
|
||||
Micropython library for the Radio-ESP-NOW(ESP32-C2)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
|
||||
import espnow
|
||||
from ubinascii import hexlify,unhexlify
|
||||
import network
|
||||
|
||||
class ESPNow(espnow.ESPNow):
|
||||
def __init__(self,channel=1,txpower=20):
|
||||
super().__init__()
|
||||
self.active(True)
|
||||
self._channel = channel
|
||||
self._txpower = txpower
|
||||
self._nic = network.WLAN(network.STA_IF)
|
||||
self._nic.active(True)
|
||||
self._nic.config(channel=self._channel,txpower=self._txpower)
|
||||
|
||||
def send(self,peer,msg):
|
||||
'''Send data after error reporting and effective processing'''
|
||||
try:
|
||||
_peer=unhexlify(peer)
|
||||
return super().send(_peer, str(msg))
|
||||
except OSError as err:
|
||||
if len(err.args) < 2:
|
||||
raise err
|
||||
if err.args[1] == 'ESP_ERR_ESPNOW_NOT_INIT':
|
||||
raise OSError("Radio(ESPNOW) is not activated, unable to transmit data")
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_IF':
|
||||
self._nic.active(True)
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_NOT_FOUND':
|
||||
self.add_peer(_peer)
|
||||
return super().send(_peer, str(msg))
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_NO_MEM':
|
||||
raise OSError("internal ESP-NOW buffers are full")
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_ARG':
|
||||
raise OSError("invalid argument")
|
||||
else:
|
||||
raise err
|
||||
|
||||
def recv(self):
|
||||
'''Receive data'''
|
||||
if self.any():
|
||||
host, msg = super().recv()
|
||||
return hexlify(host).decode(),msg.decode()
|
||||
else :
|
||||
return None,None
|
||||
|
||||
def set_channel(self,channel=None,txpower=None):
|
||||
self._channel = self._channel if channel is None else channel
|
||||
self._nic.config(channel=self._channel, txpower=self._txpower if txpower is None else txpower)
|
||||
|
||||
def _cb_handle(self, ee):
|
||||
'''Callback processing conversion'''
|
||||
host, msg = super().recv()
|
||||
if self._on_handle:
|
||||
if isinstance(self._on_handle, list):
|
||||
for func in self._on_handle:
|
||||
cmd = func.__name__.rfind('__')
|
||||
if cmd != -1:
|
||||
cmd=func.__name__[cmd+2:]
|
||||
if cmd == str(msg.decode()):
|
||||
func(hexlify(host).decode(), msg.decode())
|
||||
else:
|
||||
func(hexlify(host).decode(), msg.decode())
|
||||
else:
|
||||
self._on_handle(hexlify(host).decode(), msg.decode())
|
||||
|
||||
def recv_cb(self, recv_cbs):
|
||||
'''Receive callback'''
|
||||
self._on_handle = recv_cbs
|
||||
if recv_cbs:
|
||||
self.irq(self._cb_handle)
|
||||
|
||||
def info(self):
|
||||
'''Get the paired Mac and rssi'''
|
||||
_info=[]
|
||||
for i in self.peers_table:
|
||||
_info.append((hexlify(i).decode(),self.peers_table[i][0]))
|
||||
return _info
|
||||
|
||||
@property
|
||||
def mac(self):
|
||||
'''Get mac address'''
|
||||
return hexlify(self._nic.config('mac')).decode()
|
||||
|
||||
@property
|
||||
def channel(self):
|
||||
'''Get mac address'''
|
||||
return self._nic.config('channel')
|
||||
"""
|
||||
Radio-ESP-NOW(ESP32-C2)
|
||||
|
||||
Micropython library for the Radio-ESP-NOW(ESP32-C2)
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
|
||||
import espnow
|
||||
from ubinascii import hexlify,unhexlify
|
||||
import network
|
||||
|
||||
class ESPNow(espnow.ESPNow):
|
||||
def __init__(self,channel=1,txpower=20):
|
||||
super().__init__()
|
||||
self.active(True)
|
||||
self._channel = channel
|
||||
self._txpower = txpower
|
||||
self._nic = network.WLAN(network.STA_IF)
|
||||
self._nic.active(True)
|
||||
self._nic.config(channel=self._channel,txpower=self._txpower)
|
||||
|
||||
def send(self,peer,msg):
|
||||
'''Send data after error reporting and effective processing'''
|
||||
try:
|
||||
_peer=unhexlify(peer)
|
||||
return super().send(_peer, str(msg))
|
||||
except OSError as err:
|
||||
if len(err.args) < 2:
|
||||
raise err
|
||||
if err.args[1] == 'ESP_ERR_ESPNOW_NOT_INIT':
|
||||
raise OSError("Radio(ESPNOW) is not activated, unable to transmit data")
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_IF':
|
||||
self._nic.active(True)
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_NOT_FOUND':
|
||||
self.add_peer(_peer)
|
||||
return super().send(_peer, str(msg))
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_NO_MEM':
|
||||
raise OSError("internal ESP-NOW buffers are full")
|
||||
elif err.args[1] == 'ESP_ERR_ESPNOW_ARG':
|
||||
raise OSError("invalid argument")
|
||||
else:
|
||||
raise err
|
||||
|
||||
def recv(self):
|
||||
'''Receive data'''
|
||||
if self.any():
|
||||
host, msg = super().recv()
|
||||
return hexlify(host).decode(),msg.decode()
|
||||
else :
|
||||
return None,None
|
||||
|
||||
def set_channel(self,channel=None,txpower=None):
|
||||
self._channel = self._channel if channel is None else channel
|
||||
self._nic.config(channel=self._channel, txpower=self._txpower if txpower is None else txpower)
|
||||
|
||||
def _cb_handle(self, ee):
|
||||
'''Callback processing conversion'''
|
||||
host, msg = super().recv()
|
||||
if self._on_handle:
|
||||
if isinstance(self._on_handle, list):
|
||||
for func in self._on_handle:
|
||||
cmd = func.__name__.rfind('__')
|
||||
if cmd != -1:
|
||||
cmd=func.__name__[cmd+2:]
|
||||
if cmd == str(msg.decode()):
|
||||
func(hexlify(host).decode(), msg.decode())
|
||||
else:
|
||||
func(hexlify(host).decode(), msg.decode())
|
||||
else:
|
||||
self._on_handle(hexlify(host).decode(), msg.decode())
|
||||
|
||||
def recv_cb(self, recv_cbs):
|
||||
'''Receive callback'''
|
||||
self._on_handle = recv_cbs
|
||||
if recv_cbs:
|
||||
self.irq(self._cb_handle)
|
||||
|
||||
def info(self):
|
||||
'''Get the paired Mac and rssi'''
|
||||
_info=[]
|
||||
for i in self.peers_table:
|
||||
_info.append((hexlify(i).decode(),self.peers_table[i][0]))
|
||||
return _info
|
||||
|
||||
@property
|
||||
def mac(self):
|
||||
'''Get mac address'''
|
||||
return hexlify(self._nic.config('mac')).decode()
|
||||
|
||||
@property
|
||||
def channel(self):
|
||||
'''Get mac address'''
|
||||
return self._nic.config('channel')
|
||||
|
||||
@@ -1,71 +1,71 @@
|
||||
"""
|
||||
WS2812 RGB
|
||||
|
||||
Micropython library for the WS2812 NeoPixel-RGB
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
from time import sleep, sleep_us
|
||||
from machine import bitstream
|
||||
|
||||
class NeoPixel:
|
||||
def __init__(self, pin, n, bpp=3, timing=1, ORDER=(1, 0, 2, 3)):
|
||||
self.pin = pin
|
||||
self.bpp = bpp
|
||||
self.rgbs = n
|
||||
self.ORDER = ORDER
|
||||
self.rgb_buf = bytearray(self.rgbs * bpp)
|
||||
self.timing = (((350, 850, 800, 400) if timing else (800, 1700, 1600, 900)) if isinstance(timing, int) else timing)
|
||||
self.write()
|
||||
|
||||
def __len__(self):
|
||||
return self.rgbs
|
||||
|
||||
def __setitem__(self, n, v):
|
||||
for i in range(self.bpp):
|
||||
self.rgb_buf[n * self.bpp + self.ORDER[i]] = v[i]
|
||||
|
||||
def __getitem__(self, n):
|
||||
return tuple(self.rgb_buf[n* self.bpp + self.ORDER[i]] for i in range(self.bpp))
|
||||
|
||||
def fill(self, v):
|
||||
for i in range(self.bpp):
|
||||
j = self.ORDER[i]
|
||||
while j < self.rgbs * self.bpp:
|
||||
self.rgb_buf[j] = v[i]
|
||||
j += self.bpp
|
||||
|
||||
def write(self):
|
||||
self.pin.init(self.pin.OUT, value=0)
|
||||
bitstream(self.pin, 0, self.timing, bytes(3) + self.rgb_buf)
|
||||
sleep_us(150)
|
||||
self.pin.init(self.pin.IN)
|
||||
|
||||
def color_chase(self,R, G, B, wait):
|
||||
for i in range(self.rgbs):
|
||||
self.__setitem__(i,(R, G, B))
|
||||
self.write()
|
||||
sleep(wait/1000)
|
||||
|
||||
def rainbow_cycle(self, wait, clear=True):
|
||||
for j in range(255):
|
||||
for i in range(self.rgbs):
|
||||
rc_index = (i * 256 // self.rgbs) + j
|
||||
self.__setitem__(i,self.wheel(rc_index & 255))
|
||||
self.write()
|
||||
sleep(wait / 1000 / 256)
|
||||
if clear:
|
||||
self.fill((0, 0, 0))
|
||||
self.write()
|
||||
|
||||
def wheel(self,pos):
|
||||
if pos < 0 or pos > 255:
|
||||
return (0, 0, 0)
|
||||
elif pos < 85:
|
||||
return (pos * 3, 255 - pos * 3, 0)
|
||||
elif pos < 170:
|
||||
pos -= 85
|
||||
return (255 - pos * 3, 0, pos * 3)
|
||||
else:
|
||||
pos -= 170
|
||||
return (0, pos * 3, 255 - pos * 3)
|
||||
"""
|
||||
WS2812 RGB
|
||||
|
||||
Micropython library for the WS2812 NeoPixel-RGB
|
||||
=======================================================
|
||||
@dahanzimin From the Mixly Team
|
||||
"""
|
||||
from time import sleep, sleep_us
|
||||
from machine import bitstream
|
||||
|
||||
class NeoPixel:
|
||||
def __init__(self, pin, n, bpp=3, timing=1, ORDER=(1, 0, 2, 3)):
|
||||
self.pin = pin
|
||||
self.bpp = bpp
|
||||
self.rgbs = n
|
||||
self.ORDER = ORDER
|
||||
self.rgb_buf = bytearray(self.rgbs * bpp)
|
||||
self.timing = (((350, 850, 800, 400) if timing else (800, 1700, 1600, 900)) if isinstance(timing, int) else timing)
|
||||
self.write()
|
||||
|
||||
def __len__(self):
|
||||
return self.rgbs
|
||||
|
||||
def __setitem__(self, n, v):
|
||||
for i in range(self.bpp):
|
||||
self.rgb_buf[n * self.bpp + self.ORDER[i]] = v[i]
|
||||
|
||||
def __getitem__(self, n):
|
||||
return tuple(self.rgb_buf[n* self.bpp + self.ORDER[i]] for i in range(self.bpp))
|
||||
|
||||
def fill(self, v):
|
||||
for i in range(self.bpp):
|
||||
j = self.ORDER[i]
|
||||
while j < self.rgbs * self.bpp:
|
||||
self.rgb_buf[j] = v[i]
|
||||
j += self.bpp
|
||||
|
||||
def write(self):
|
||||
self.pin.init(self.pin.OUT, value=0)
|
||||
bitstream(self.pin, 0, self.timing, bytes(3) + self.rgb_buf)
|
||||
sleep_us(150)
|
||||
self.pin.init(self.pin.IN)
|
||||
|
||||
def color_chase(self,R, G, B, wait):
|
||||
for i in range(self.rgbs):
|
||||
self.__setitem__(i,(R, G, B))
|
||||
self.write()
|
||||
sleep(wait/1000)
|
||||
|
||||
def rainbow_cycle(self, wait, clear=True):
|
||||
for j in range(255):
|
||||
for i in range(self.rgbs):
|
||||
rc_index = (i * 256 // self.rgbs) + j
|
||||
self.__setitem__(i,self.wheel(rc_index & 255))
|
||||
self.write()
|
||||
sleep(wait / 1000 / 256)
|
||||
if clear:
|
||||
self.fill((0, 0, 0))
|
||||
self.write()
|
||||
|
||||
def wheel(self,pos):
|
||||
if pos < 0 or pos > 255:
|
||||
return (0, 0, 0)
|
||||
elif pos < 85:
|
||||
return (pos * 3, 255 - pos * 3, 0)
|
||||
elif pos < 170:
|
||||
pos -= 85
|
||||
return (255 - pos * 3, 0, pos * 3)
|
||||
else:
|
||||
pos -= 170
|
||||
return (0, pos * 3, 255 - pos * 3)
|
||||
|
||||
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
Reference in New Issue
Block a user