mixly3-server/arduino-libs/arduino-cli/libraries/MPU9250_asukiaaa/src/MPU9250_asukiaaa.cpp

#include "MPU9250_asukiaaa.h"
#include <math.h>

#define AK8963_ADDRESS  0x0C
#define AK8963_RA_HXL   0x03
#define AK8963_RA_CNTL1 0x0A
#define AK8963_RA_ASAX  0x10

#define MPU9250_ADDR_ACCELCONFIG  0x1C
#define MPU9250_ADDR_INT_PIN_CFG  0x37
#define MPU9250_ADDR_ACCEL_XOUT_H 0x3B
#define MPU9250_ADDR_GYRO_XOUT_H  0x43
#define MPU9250_ADDR_PWR_MGMT_1   0x6B
#define MPU9250_ADDR_WHOAMI       0x75

uint8_t MPU9250_asukiaaa::i2cRead(uint8_t Address, uint8_t Register, uint8_t Nbytes, uint8_t* Data) {
  myWire->beginTransmission(Address);
  myWire->write(Register);
  uint8_t result = myWire->endTransmission();
  if (result != 0) {
    return result;
  }

  myWire->requestFrom(Address, Nbytes);
  uint8_t index = 0;
  while (myWire->available()) {
    uint8_t d = myWire->read();
    if (index < Nbytes) {
      Data[index++] = d;
    }
  }
  return 0;
}

uint8_t MPU9250_asukiaaa::i2cWriteByte(uint8_t Address, uint8_t Register, uint8_t Data) {
  myWire->beginTransmission(Address);
  myWire->write(Register);
  myWire->write(Data);
  return myWire->endTransmission();
}

MPU9250_asukiaaa::MPU9250_asukiaaa(uint8_t address):
  address(address) {
  accelRange = 0;
  gyroRange  = 0;
  magXOffset = 0;
  magYOffset = 0;
  magZOffset = 0;
  myWire = NULL;
}

void MPU9250_asukiaaa::setWire(TwoWire* wire) {
  myWire = wire;
}

uint8_t MPU9250_asukiaaa::readId(uint8_t *id) {
  beginWireIfNull();
  return i2cRead(address, MPU9250_ADDR_WHOAMI, 1, id);
}

void MPU9250_asukiaaa::beginWireIfNull() {
  if (myWire == NULL) {
    myWire = &Wire;
    myWire->begin();
  }
}

void MPU9250_asukiaaa::beginAccel(uint8_t mode) {
  beginWireIfNull();
  switch(mode) {
  case ACC_FULL_SCALE_2_G:
    accelRange = 2.0;
    break;
  case ACC_FULL_SCALE_4_G:
    accelRange = 4.0;
    break;
  case ACC_FULL_SCALE_8_G:
    accelRange = 8.0;
    break;
  case ACC_FULL_SCALE_16_G:
    accelRange = 16.0;
    break;
  default:
    return; // Return without writing invalid mode
  }
  i2cWriteByte(address, MPU9250_ADDR_ACCELCONFIG, mode);
  delay(10);
}

void MPU9250_asukiaaa::magReadAdjustValues() {
  magSetMode(MAG_MODE_POWERDOWN);
  magSetMode(MAG_MODE_FUSEROM);
  uint8_t buff[3];
  i2cRead(AK8963_ADDRESS, AK8963_RA_ASAX, 3, buff);
  magXAdjust = buff[0];
  magYAdjust = buff[1];
  magZAdjust = buff[2];
}

void MPU9250_asukiaaa::beginMag(uint8_t mode) {
  beginWireIfNull();
  magWakeup();
  magEnableSlaveMode();

  magReadAdjustValues();
  magSetMode(MAG_MODE_POWERDOWN);
  magSetMode(mode);
  delay(10);
}

void MPU9250_asukiaaa::magSetMode(uint8_t mode) {
  i2cWriteByte(AK8963_ADDRESS, AK8963_RA_CNTL1, mode);
  delay(10);
}

void MPU9250_asukiaaa::magWakeup() {
  unsigned char bits;
  i2cRead(address, MPU9250_ADDR_PWR_MGMT_1, 1, &bits);
  bits &= ~B01110000; // Turn off SLEEP, STANDBY, CYCLE
  i2cWriteByte(address, MPU9250_ADDR_PWR_MGMT_1, bits);
  delay(10);
}

void MPU9250_asukiaaa::magEnableSlaveMode() {
  unsigned char bits;
  i2cRead(address, MPU9250_ADDR_INT_PIN_CFG, 1, &bits);
  bits |= B00000010; // Activate BYPASS_EN
  i2cWriteByte(address, MPU9250_ADDR_INT_PIN_CFG, bits);
  delay(10);
}

const float Pi = 3.14159;

float MPU9250_asukiaaa::magHorizDirection() {
  return atan2(magX(), magY()) * 180 / Pi;
}

uint8_t MPU9250_asukiaaa::magUpdate() {
  return i2cRead(AK8963_ADDRESS, AK8963_RA_HXL, 7, magBuff);
}

int16_t MPU9250_asukiaaa::magGet(uint8_t highIndex, uint8_t lowIndex) {
  return (((int16_t) magBuff[highIndex]) << 8) | magBuff[lowIndex];
}

float adjustMagValue(int16_t value, uint8_t adjust) {
  return ((float) value * (((((float) adjust - 128) * 0.5) / 128) + 1));
}

float MPU9250_asukiaaa::magX() {
  return adjustMagValue(magGet(1, 0), magXAdjust) + magXOffset;
}

float MPU9250_asukiaaa::magY() {
  return adjustMagValue(magGet(3, 2), magYAdjust) + magYOffset;
}

float MPU9250_asukiaaa::magZ() {
  return adjustMagValue(magGet(5, 4), magZAdjust) + magZOffset;
}

uint8_t MPU9250_asukiaaa::accelUpdate() {
  return i2cRead(address, MPU9250_ADDR_ACCEL_XOUT_H, 6, accelBuff);
}

float MPU9250_asukiaaa::accelGet(uint8_t highIndex, uint8_t lowIndex) {
  int16_t v = ((int16_t) accelBuff[highIndex]) << 8 | accelBuff[lowIndex];
  return ((float) -v) * accelRange / (float) 0x8000; // (float) 0x8000 == 32768.0
}

float MPU9250_asukiaaa::accelX() {
  return accelGet(0, 1);
}

float MPU9250_asukiaaa::accelY() {
  return accelGet(2, 3);
}

float MPU9250_asukiaaa::accelZ() {
  return accelGet(4, 5);
}

float MPU9250_asukiaaa::accelSqrt() {
  return sqrt(pow(accelGet(0, 1), 2) +
              pow(accelGet(2, 3), 2) +
              pow(accelGet(4, 5), 2));
}

void MPU9250_asukiaaa::beginGyro(uint8_t mode) {
  beginWireIfNull();
  switch (mode) {
  case GYRO_FULL_SCALE_250_DPS:
    gyroRange = 250.0;
    break;
  case GYRO_FULL_SCALE_500_DPS:
    gyroRange = 500.0;
    break;
  case GYRO_FULL_SCALE_1000_DPS:
    gyroRange = 1000.0;
    break;
  case GYRO_FULL_SCALE_2000_DPS:
    gyroRange = 2000.0;
    break;
  default:
    return; // Return without writing invalid mode
  }
  i2cWriteByte(address, 27, mode);
  delay(10);
}

uint8_t MPU9250_asukiaaa::gyroUpdate() {
  return i2cRead(address, MPU9250_ADDR_GYRO_XOUT_H, 6, gyroBuff);
}

float MPU9250_asukiaaa::gyroGet(uint8_t highIndex, uint8_t lowIndex) {
  int16_t v = ((int16_t) gyroBuff[highIndex]) << 8 | gyroBuff[lowIndex];
  return ((float) -v) * gyroRange / (float) 0x8000;
}

float MPU9250_asukiaaa::gyroX() {
  return gyroGet(0, 1);
}

float MPU9250_asukiaaa::gyroY() {
  return gyroGet(2, 3);
}

float MPU9250_asukiaaa::gyroZ() {
  return gyroGet(4, 5);
}