#include "AXP192.h"

AXP192::AXP192(){
  
}

void AXP192::begin(void){
  
	Wire1.begin(21, 22);
	Wire1.setClock(400000);

	// Set LDO2 & LDO3(TFT_LED & TFT) 3.0V
	Write1Byte(0x28, 0xcc);	

	// Set ADC to All Enable
	Write1Byte(0x82, 0xff);

    // Bat charge voltage to 4.2, Current 100MA
    Write1Byte(0x33, 0xc0);

    // Enable Bat,ACIN,VBUS,APS adc
    Write1Byte(0x82, 0xff);

    // Enable Ext, LDO2, LDO3, DCDC1
	Write1Byte(0x12, Read8bit(0x12) | 0x4D);	
    
    // 128ms power on, 4s power off
    Write1Byte(0x36, 0x0C);

	// Set RTC voltage to 3.3V
	Write1Byte(0x91, 0xF0);	

	// Set GPIO0 to LDO
	Write1Byte(0x90, 0x02);

    // Disable vbus hold limit
	Write1Byte(0x30, 0x80);

    // Set temperature protection
    Write1Byte(0x39, 0xfc);
    
    // Enable RTC BAT charge 
    Write1Byte(0x35, 0xa2);
    
    // Enable bat detection
    Write1Byte(0x32, 0x46);

    ScreenBreath(11);
}

void AXP192::Write1Byte( uint8_t Addr ,  uint8_t Data )
{
	Wire1.beginTransmission(0x34);
	Wire1.write(Addr);
	Wire1.write(Data);
	Wire1.endTransmission();
}

uint8_t AXP192::Read8bit( uint8_t Addr )
{
	Wire1.beginTransmission(0x34);
	Wire1.write(Addr);
	Wire1.endTransmission();
	Wire1.requestFrom(0x34, 1);
	return Wire1.read();
}

uint16_t AXP192::Read12Bit( uint8_t Addr)
{
    uint16_t Data = 0;
	uint8_t buf[2];
    ReadBuff(Addr,2,buf);
    Data = ((buf[0] << 4) + buf[1]); //
    return Data;
}

uint16_t AXP192::Read13Bit( uint8_t Addr)
{
    uint16_t Data = 0;
	uint8_t buf[2];
    ReadBuff(Addr,2,buf);
    Data = ((buf[0] << 5) + buf[1]); //
    return Data;
}

uint16_t AXP192::Read16bit( uint8_t Addr )
{
	uint16_t ReData = 0;
	Wire1.beginTransmission(0x34);
	Wire1.write(Addr);
	Wire1.endTransmission();
	Wire1.requestFrom(0x34, 2);
	for( int i = 0 ; i < 2 ; i++ )
	{
		ReData <<= 8;
		ReData |= Wire1.read();
	}
	return ReData;
}

uint32_t AXP192::Read24bit( uint8_t Addr )
{
	uint32_t ReData = 0;
	Wire1.beginTransmission(0x34);
	Wire1.write(Addr);
	Wire1.endTransmission();
	Wire1.requestFrom(0x34, 3);
	for( int i = 0 ; i < 3 ; i++ )
	{
		ReData <<= 8;
		ReData |= Wire1.read();
	}
	return ReData;
}

uint32_t AXP192::Read32bit( uint8_t Addr )
{
	uint32_t ReData = 0;
	Wire1.beginTransmission(0x34);
	Wire1.write(Addr);
	Wire1.endTransmission();
	Wire1.requestFrom(0x34, 2);
	for( int i = 0 ; i < 4 ; i++ )
	{
		ReData <<= 8;
		ReData |= Wire1.read();
	}
	return ReData;
}

void AXP192::ReadBuff( uint8_t Addr , uint8_t Size , uint8_t *Buff )
{
	Wire1.beginTransmission(0x34);
	Wire1.write(Addr);
	Wire1.endTransmission();
	Wire1.requestFrom(0x34, (int)Size);
	for (int i = 0; i < Size; i++)
	{
		*( Buff + i )  = Wire1.read();
	}
}

void AXP192::ScreenBreath(uint8_t brightness)
{
	if (brightness > 12) 
	{
		brightness = 12;
	}
	uint8_t buf = Read8bit( 0x28 );
	Write1Byte( 0x28 , ((buf & 0x0f) | (brightness << 4)) );
}

bool AXP192::GetBatState()
{
	if( Read8bit(0x01) | 0x20 )
		return true;
	else
		return false;
}
//---------coulombcounter_from_here---------
//enable: void EnableCoulombcounter(void); 
//disable: void DisableCOulombcounter(void);
//stop: void StopCoulombcounter(void);
//clear: void ClearCoulombcounter(void);
//get charge data: uint32_t GetCoulombchargeData(void);
//get discharge data: uint32_t GetCoulombdischargeData(void);
//get coulomb val affter calculation: float GetCoulombData(void);
//------------------------------------------
void  AXP192::EnableCoulombcounter(void)
{
  	Write1Byte( 0xB8 , 0x80 );
}

void  AXP192::DisableCoulombcounter(void)
{
  	Write1Byte( 0xB8 , 0x00 );
}

void  AXP192::StopCoulombcounter(void)
{
  	Write1Byte( 0xB8 , 0xC0 );
}

void  AXP192::ClearCoulombcounter(void)
{
  	Write1Byte( 0xB8 , 0xA0 );
}

uint32_t AXP192::GetCoulombchargeData(void)
{
  	return Read32bit(0xB0);
}

uint32_t AXP192::GetCoulombdischargeData(void)
{
  	return Read32bit(0xB4);
}

float AXP192::GetCoulombData(void){

  uint32_t coin = 0;
  uint32_t coout = 0;

  coin = GetCoulombchargeData();
  coout = GetCoulombdischargeData();

  //c = 65536 * current_LSB * (coin - coout) / 3600 / ADC rate
  //Adc rate can be read from 84H ,change this variable if you change the ADC reate
  float ccc = 65536 * 0.5 * (coin - coout) / 3600.0 / 25.0;
  return ccc;

}
//----------coulomb_end_at_here----------

uint16_t AXP192::GetVbatData(void){

    uint16_t vbat = 0;
	uint8_t buf[2];
    ReadBuff(0x78,2,buf);
    vbat = ((buf[0] << 4) + buf[1]); // V
    return vbat;
}

uint16_t AXP192::GetVinData(void)
{
    uint16_t vin = 0;
    uint8_t buf[2];
    ReadBuff(0x56,2,buf);
    vin = ((buf[0] << 4) + buf[1]); // V
    return vin;
}

uint16_t AXP192::GetIinData(void)
{
    uint16_t iin = 0;
    uint8_t buf[2];
    ReadBuff(0x58,2,buf);
    iin = ((buf[0] << 4) + buf[1]);
    return iin;
}

uint16_t AXP192::GetVusbinData(void)
{
    uint16_t vin = 0;
    uint8_t buf[2];
    ReadBuff(0x5a,2,buf);
    vin = ((buf[0] << 4) + buf[1]); // V
    return vin;
}

uint16_t AXP192::GetIusbinData(void)
{
    uint16_t iin = 0;
    uint8_t buf[2];
    ReadBuff(0x5C,2,buf);
    iin = ((buf[0] << 4) + buf[1]);
    return iin;
}

uint16_t AXP192::GetIchargeData(void){

    uint16_t icharge = 0;
    uint8_t buf[2];
    ReadBuff(0x7A,2,buf);
    icharge = ( buf[0] << 5 ) + buf[1] ;
    return icharge;
}

uint16_t AXP192::GetIdischargeData(void)
{
    uint16_t idischarge = 0;
    uint8_t buf[2];
    ReadBuff(0x7C,2,buf);
    idischarge = ( buf[0] << 5 ) + buf[1] ;
    return idischarge;
}

uint16_t AXP192::GetTempData(void)
{
    uint16_t temp = 0;
    uint8_t buf[2];
    ReadBuff(0x5e,2,buf);
    temp = ((buf[0] << 4) + buf[1]);
    return temp;
}

uint32_t AXP192::GetPowerbatData(void)
{
    uint32_t power = 0;
    uint8_t buf[3];
    ReadBuff(0x70,2,buf);
    power = (buf[0] << 16) + (buf[1] << 8) + buf[2];
    return power;
}

uint16_t AXP192::GetVapsData(void)
{
    uint16_t vaps = 0;
    uint8_t buf[2];
    ReadBuff(0x7e,2,buf);
    vaps = ((buf[0] << 4) + buf[1]);
    return vaps;
}

void AXP192::SetSleep(void)
{
    uint8_t buf = Read8bit(0x31);
    buf = (1<<3)|buf;
	Write1Byte( 0x31 , buf );
	Write1Byte( 0x90 , 0x00 );
	Write1Byte( 0x12 , 0x09 );
    Write1Byte( 0x12 , 0x00 );
}

uint8_t AXP192::GetWarningLeve(void)
{
    Wire1.beginTransmission(0x34);
    Wire1.write(0x47);
    Wire1.endTransmission();
    Wire1.requestFrom(0x34, 1);
    uint8_t buf = Wire1.read();
    return (buf & 0x01);
}

// -- sleep
void AXP192::DeepSleep(uint64_t time_in_us)
{ 
	SetSleep();
	
	if (time_in_us > 0)
	{
		esp_sleep_enable_timer_wakeup(time_in_us);
	}
	else
	{
		esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_TIMER);
	}
	(time_in_us == 0) ? esp_deep_sleep_start() : esp_deep_sleep(time_in_us);
}

void AXP192::LightSleep(uint64_t time_in_us)
{
  	SetSleep();
  
	if (time_in_us > 0)
	{
		esp_sleep_enable_timer_wakeup(time_in_us);
	}
	else
	{
		esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_TIMER);
	}
  	esp_light_sleep_start();
}

// 0 not press, 0x01 long press, 0x02 press
uint8_t AXP192::GetBtnPress()
{
    uint8_t state = Read8bit(0x46);
    if(state) 
    {
        Write1Byte( 0x46 , 0x03 );
    }
    return state;
}

uint8_t AXP192::GetWarningLevel(void)
{
    return Read8bit(0x47) & 0x01;
}

float AXP192::GetBatVoltage()
{
	float ADCLSB = 1.1 / 1000.0;
	uint16_t ReData = Read12Bit( 0x78 );
	return ReData * ADCLSB;
}

float AXP192::GetBatCurrent()
{
	float ADCLSB = 0.5;
	uint16_t CurrentIn = Read13Bit( 0x7A );
	uint16_t CurrentOut = Read13Bit( 0x7C );
	return ( CurrentIn - CurrentOut ) * ADCLSB;
}

float AXP192::GetVinVoltage()
{
	float ADCLSB = 1.7 / 1000.0;
	uint16_t ReData = Read12Bit( 0x56 );
	return ReData * ADCLSB;
}

float AXP192::GetVinCurrent()
{
	float ADCLSB = 0.625;
	uint16_t ReData = Read12Bit( 0x58 );
	return ReData * ADCLSB;
}

float AXP192::GetVBusVoltage()
{
	float ADCLSB = 1.7 / 1000.0;
	uint16_t ReData = Read12Bit( 0x5A );
	return ReData * ADCLSB;
}

float AXP192::GetVBusCurrent()
{
	float ADCLSB = 0.375;
	uint16_t ReData = Read12Bit( 0x5C );
	return ReData * ADCLSB;
}

float AXP192::GetTempInAXP192()
{
	float ADCLSB = 0.1;
  	const float OFFSET_DEG_C = -144.7;
	uint16_t ReData = Read12Bit( 0x5E );
	return OFFSET_DEG_C + ReData * ADCLSB;
}

float AXP192::GetBatPower()
{
	float VoltageLSB = 1.1;
	float CurrentLCS = 0.5;
	uint32_t ReData = Read24bit( 0x70 );
	return  VoltageLSB * CurrentLCS * ReData/ 1000.0;
}

float AXP192::GetBatChargeCurrent()
{
	float ADCLSB = 0.5;
	uint16_t ReData = Read12Bit( 0x7A );
	return ReData * ADCLSB;
}
float AXP192::GetAPSVoltage()
{
	float ADCLSB = 1.4  / 1000.0;
	uint16_t ReData = Read12Bit( 0x7E );
	return ReData * ADCLSB;
}

float AXP192::GetBatCoulombInput()
{
	uint32_t ReData = Read32bit( 0xB0 );
	return ReData * 65536 * 0.5 / 3600 /25.0;
}

float AXP192::GetBatCoulombOut()
{
	uint32_t ReData = Read32bit( 0xB4 );
	return ReData * 65536 * 0.5 / 3600 /25.0;
}


void AXP192::SetCoulombClear()
{
	Write1Byte(0xB8,0x20);
}

void AXP192::SetLDO2( bool State )
{
    uint8_t buf = Read8bit(0x12);
	if( State == true )
    	buf = (1<<2) | buf;
	else 
		buf = ~(1<<2) & buf;
	Write1Byte( 0x12 , buf );
}

// Cut all power, except for LDO1 (RTC)
void AXP192::PowerOff()
{
    Write1Byte(0x32, Read8bit(0x32) | 0x80);     // MSB for Power Off
}