/*
 * General options
 */

#define BOARD_FIRMWARE_VERSION        "1.0.1"
#define BOARD_HARDWARE_VERSION        "1.0.0"

#define BOARD_NAME                    "Product Name"        // Name of your product. Should match App Export request info.
#define BOARD_VENDOR                  "Company Name"        // Name of your company. Should match App Export request info.
#define BOARD_TEMPLATE_ID             "TMPL0000"            // ID of the Tile Template. Can be found in Tile Template Settings

#define PRODUCT_WIFI_SSID             "Our Product"         // Name of the device, to be displayed during configuration. Should match export request info.
#define BOARD_CONFIG_AP_URL           "our-product"         // Config page will be available in a browser at 'http://our-product.local/'

/*
 * Board configuration (see examples below).
 */

#if defined(USE_CUSTOM_BOARD)

  // Custom board configuration
  #define BOARD_BUTTON_PIN            0                     // Pin where user button is attached
  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"

  #define BOARD_LED_PIN               6                     // Set LED pin - if you have a simple LED attached
  //#define BOARD_LED_PIN_R           15                    // Set R,G,B pins - if your LED is PWM RGB 
  //#define BOARD_LED_PIN_G           12
  //#define BOARD_LED_PIN_B           13
  //#define BOARD_LED_PIN_WS2812      4                     // Set if your LED is WS2812 RGB
  #define BOARD_LED_INVERSE           false                 // true, if you need to inverse LED signal
  #define BOARD_LED_BRIGHTNESS        64                    // 0..255 brightness control

#elif defined(USE_MKR1000_BOARD)

  // Example configuration for MKR1000 Board
  #define BOARD_BUTTON_PIN            0
  #define BOARD_BUTTON_ACTIVE_LOW     true

  #define BOARD_LED_PIN               6
  #define BOARD_LED_INVERSE           false

#else
  #error "No board selected"
#endif


/*
 * Advanced options
 */

#define BUTTON_HOLD_TIME_INDICATION   3000
#define BUTTON_HOLD_TIME_ACTION       10000

#define BOARD_PWM_MAX                 255

#define WIFI_NET_CONNECT_TIMEOUT      30000
#define WIFI_CLOUD_CONNECT_TIMEOUT    15000
#define WIFI_AP_CONFIG_PORT           80
//#define WIFI_AP_IP                  IPAddress(192, 168, 4, 1)
//#define WIFI_AP_Subnet              IPAddress(255, 255, 255, 0)
//#define WIFI_CAPTIVE_PORTAL_ENABLE

//#define USE_TICKER
//#define USE_TIMER_ONE
//#define USE_TIMER_THREE
#define USE_TIMER_FIVE

#if defined(APP_DEBUG)
  #define DEBUG_PRINT(...) BLYNK_LOG1(__VA_ARGS__)
#else
  #define DEBUG_PRINT(...)
#endif