feat: 全量同步 254 个常用的 Arduino 扩展库文件
This commit is contained in:
yczpf2019
564
arduino-libs/arduino-cli/libraries/U8g2/src/clib/u8x8_d_t6963.c
Normal file
564
arduino-libs/arduino-cli/libraries/U8g2/src/clib/u8x8_d_t6963.c
Normal file
@@ -0,0 +1,564 @@
|
||||
/*
|
||||
|
||||
u8x8_d_t6963.c
|
||||
|
||||
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
||||
|
||||
Copyright (c) 2016, olikraus@gmail.com
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright notice, this list
|
||||
of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above copyright notice, this
|
||||
list of conditions and the following disclaimer in the documentation and/or other
|
||||
materials provided with the distribution.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||||
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
|
||||
The t6963 controller does not support hardware graphics flip.
|
||||
Contrast adjustment is done by an external resistor --> no support for contrast adjustment
|
||||
|
||||
|
||||
*/
|
||||
#include "u8x8.h"
|
||||
|
||||
|
||||
|
||||
static const uint8_t u8x8_d_t6963_powersave0_seq[] = {
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_C(0x098), /* mode register: Display Mode, Graphics on, Text off, Cursor off */
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_END() /* end of sequence */
|
||||
};
|
||||
|
||||
static const uint8_t u8x8_d_t6963_powersave1_seq[] = {
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_C(0x090), /* All Off */
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_END() /* end of sequence */
|
||||
};
|
||||
|
||||
|
||||
uint8_t u8x8_d_t6963_common(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
uint8_t c, i;
|
||||
uint16_t y;
|
||||
uint8_t *ptr;
|
||||
switch(msg)
|
||||
{
|
||||
/* U8X8_MSG_DISPLAY_SETUP_MEMORY is handled by the calling function */
|
||||
/*
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
break;
|
||||
*/
|
||||
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
||||
if ( arg_int == 0 )
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_powersave0_seq);
|
||||
else
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_powersave1_seq);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
||||
y = (((u8x8_tile_t *)arg_ptr)->y_pos);
|
||||
y*=8;
|
||||
y*= u8x8->display_info->tile_width;
|
||||
/* x = ((u8x8_tile_t *)arg_ptr)->x_pos; x is ignored... no u8x8 support */
|
||||
//u8x8->gpio_and_delay_cb(u8x8, U8X8_MSG_DELAY_NANO, 200, NULL); /* extra dely required */
|
||||
u8x8_cad_StartTransfer(u8x8);
|
||||
//u8x8->gpio_and_delay_cb(u8x8, U8X8_MSG_DELAY_NANO, 200, NULL); /* extra dely required */
|
||||
/*
|
||||
Tile structure is reused here for the t6963, however u8x8 is not supported
|
||||
tile_ptr points to data which has cnt*8 bytes (same as SSD1306 tiles)
|
||||
Buffer is expected to have 8 lines of code fitting to the t6963 internal memory
|
||||
"cnt" includes the number of horizontal bytes. width is equal to cnt*8
|
||||
|
||||
TODO: Consider arg_int, however arg_int is not used by u8g2
|
||||
*/
|
||||
c = ((u8x8_tile_t *)arg_ptr)->cnt; /* number of tiles */
|
||||
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr; /* data ptr to the tiles */
|
||||
for( i = 0; i < 8; i++ )
|
||||
{
|
||||
u8x8_cad_SendArg(u8x8, y&255);
|
||||
u8x8_cad_SendArg(u8x8, y>>8);
|
||||
u8x8_cad_SendCmd(u8x8, 0x024 ); /* set adr */
|
||||
u8x8_cad_SendCmd(u8x8, 0x0b0 ); /* auto write start */
|
||||
|
||||
|
||||
//c = ((u8x8_tile_t *)arg_ptr)->cnt; /* number of tiles */
|
||||
u8x8_cad_SendData(u8x8, c, ptr); /* note: SendData can not handle more than 255 bytes, send one line of data */
|
||||
|
||||
u8x8_cad_SendCmd(u8x8, 0x0b2 ); /* auto write reset */
|
||||
ptr += u8x8->display_info->tile_width;
|
||||
y += u8x8->display_info->tile_width;
|
||||
}
|
||||
|
||||
u8x8_cad_EndTransfer(u8x8);
|
||||
//u8x8->gpio_and_delay_cb(u8x8, U8X8_MSG_DELAY_NANO, 200, NULL); /* extra dely required */
|
||||
|
||||
break;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*=============================================*/
|
||||
|
||||
|
||||
static const u8x8_display_info_t u8x8_t6963_240x128_display_info =
|
||||
{
|
||||
/* chip_enable_level = */ 0,
|
||||
/* chip_disable_level = */ 1,
|
||||
|
||||
/* post_chip_enable_wait_ns = */ 110, /* T6963 Datasheet p30 */
|
||||
/* pre_chip_disable_wait_ns = */ 100, /* T6963 Datasheet p30 */
|
||||
/* reset_pulse_width_ms = */ 1,
|
||||
/* post_reset_wait_ms = */ 6,
|
||||
/* sda_setup_time_ns = */ 20,
|
||||
/* sck_pulse_width_ns = */ 140,
|
||||
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
||||
/* spi_mode = */ 0,
|
||||
/* i2c_bus_clock_100kHz = */ 4,
|
||||
/* data_setup_time_ns = */ 80,
|
||||
/* write_pulse_width_ns = */ 80,
|
||||
/* tile_width = */ 30,
|
||||
/* tile_hight = */ 16,
|
||||
/* default_x_offset = */ 0,
|
||||
/* flipmode_x_offset = */ 0,
|
||||
/* pixel_width = */ 240,
|
||||
/* pixel_height = */ 128
|
||||
};
|
||||
|
||||
/* 240x128 */
|
||||
static const uint8_t u8x8_d_t6963_240x128_init_seq[] = {
|
||||
U8X8_DLY(100),
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_DLY(100),
|
||||
|
||||
U8X8_AAC(0x00,0x00,0x021), /* low, high, set cursor pos */
|
||||
U8X8_AAC(0x00,0x00,0x022), /* low, high, set offset */
|
||||
U8X8_AAC(0x00,0x00,0x040), /* low, high, set text home */
|
||||
U8X8_AAC(240/8,0x00,0x041), /* low, high, set text columns */
|
||||
U8X8_AAC(0x00,0x00,0x042), /* low, high, graphics home */
|
||||
U8X8_AAC(240/8,0x00,0x043), /* low, high, graphics columns */
|
||||
U8X8_DLY(2), /* delay 2ms */
|
||||
// mode set
|
||||
// 0x080: Internal CG, OR Mode
|
||||
// 0x081: Internal CG, EXOR Mode
|
||||
// 0x083: Internal CG, AND Mode
|
||||
// 0x088: External CG, OR Mode
|
||||
// 0x089: External CG, EXOR Mode
|
||||
// 0x08B: External CG, AND Mode
|
||||
U8X8_C(0x080), /* mode register: OR Mode, Internal Character Mode */
|
||||
// display mode
|
||||
// 0x090: Display off
|
||||
// 0x094: Graphic off, text on, cursor off, blink off
|
||||
// 0x096: Graphic off, text on, cursor on, blink off
|
||||
// 0x097: Graphic off, text on, cursor on, blink on
|
||||
// 0x098: Graphic on, text off, cursor off, blink off
|
||||
// 0x09a: Graphic on, text off, cursor on, blink off
|
||||
// ...
|
||||
// 0x09c: Graphic on, text on, cursor off, blink off
|
||||
// 0x09f: Graphic on, text on, cursor on, blink on
|
||||
U8X8_C(0x090), /* All Off */
|
||||
U8X8_AAC(0x00,0x00,0x024), /* low, high, set adr pointer */
|
||||
|
||||
U8X8_DLY(100),
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_DLY(100),
|
||||
};
|
||||
|
||||
uint8_t u8x8_d_t6963_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_t6963_240x128_display_info);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_240x128_init_seq);
|
||||
break;
|
||||
default:
|
||||
return u8x8_d_t6963_common(u8x8, msg, arg_int, arg_ptr);
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*=============================================*/
|
||||
|
||||
static const u8x8_display_info_t u8x8_t6963_240x64_display_info =
|
||||
{
|
||||
/* chip_enable_level = */ 0,
|
||||
/* chip_disable_level = */ 1,
|
||||
|
||||
/* post_chip_enable_wait_ns = */ 110, /* T6963 Datasheet p30 */
|
||||
/* pre_chip_disable_wait_ns = */ 100, /* T6963 Datasheet p30 */
|
||||
/* reset_pulse_width_ms = */ 1,
|
||||
/* post_reset_wait_ms = */ 6,
|
||||
/* sda_setup_time_ns = */ 20,
|
||||
/* sck_pulse_width_ns = */ 140,
|
||||
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
||||
/* spi_mode = */ 0,
|
||||
/* i2c_bus_clock_100kHz = */ 4,
|
||||
/* data_setup_time_ns = */ 80,
|
||||
/* write_pulse_width_ns = */ 80,
|
||||
/* tile_width = */ 30,
|
||||
/* tile_hight = */ 8,
|
||||
/* default_x_offset = */ 0,
|
||||
/* flipmode_x_offset = */ 0,
|
||||
/* pixel_width = */ 240,
|
||||
/* pixel_height = */ 64
|
||||
};
|
||||
|
||||
|
||||
/* 240x64 */
|
||||
static const uint8_t u8x8_d_t6963_240x64_init_seq[] = {
|
||||
U8X8_DLY(100),
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_DLY(100),
|
||||
|
||||
U8X8_AAC(0x00,0x00,0x021), /* low, high, set cursor pos */
|
||||
U8X8_AAC(0x00,0x00,0x022), /* low, high, set offset */
|
||||
U8X8_AAC(0x00,0x00,0x040), /* low, high, set text home */
|
||||
U8X8_AAC(240/8,0x00,0x041), /* low, high, set text columns */
|
||||
U8X8_AAC(0x00,0x00,0x042), /* low, high, graphics home */
|
||||
U8X8_AAC(240/8,0x00,0x043), /* low, high, graphics columns */
|
||||
U8X8_DLY(2), /* delay 2ms */
|
||||
// mode set
|
||||
// 0x080: Internal CG, OR Mode
|
||||
// 0x081: Internal CG, EXOR Mode
|
||||
// 0x083: Internal CG, AND Mode
|
||||
// 0x088: External CG, OR Mode
|
||||
// 0x089: External CG, EXOR Mode
|
||||
// 0x08B: External CG, AND Mode
|
||||
U8X8_C(0x080), /* mode register: OR Mode, Internal Character Mode */
|
||||
// display mode
|
||||
// 0x090: Display off
|
||||
// 0x094: Graphic off, text on, cursor off, blink off
|
||||
// 0x096: Graphic off, text on, cursor on, blink off
|
||||
// 0x097: Graphic off, text on, cursor on, blink on
|
||||
// 0x098: Graphic on, text off, cursor off, blink off
|
||||
// 0x09a: Graphic on, text off, cursor on, blink off
|
||||
// ...
|
||||
// 0x09c: Graphic on, text on, cursor off, blink off
|
||||
// 0x09f: Graphic on, text on, cursor on, blink on
|
||||
U8X8_C(0x090), /* All Off */
|
||||
U8X8_AAC(0x00,0x00,0x024), /* low, high, set adr pointer */
|
||||
|
||||
U8X8_DLY(100),
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_DLY(100),
|
||||
};
|
||||
|
||||
uint8_t u8x8_d_t6963_240x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_t6963_240x64_display_info);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_240x64_init_seq);
|
||||
break;
|
||||
default:
|
||||
return u8x8_d_t6963_common(u8x8, msg, arg_int, arg_ptr);
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*=============================================*/
|
||||
|
||||
|
||||
|
||||
static const u8x8_display_info_t u8x8_t6963_256x64_display_info =
|
||||
{
|
||||
/* chip_enable_level = */ 0,
|
||||
/* chip_disable_level = */ 1,
|
||||
|
||||
/* post_chip_enable_wait_ns = */ 110, /* T6963 Datasheet p30 */
|
||||
/* pre_chip_disable_wait_ns = */ 100, /* T6963 Datasheet p30 */
|
||||
/* reset_pulse_width_ms = */ 1,
|
||||
/* post_reset_wait_ms = */ 6,
|
||||
/* sda_setup_time_ns = */ 20,
|
||||
/* sck_pulse_width_ns = */ 140,
|
||||
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
||||
/* spi_mode = */ 0,
|
||||
/* i2c_bus_clock_100kHz = */ 4,
|
||||
/* data_setup_time_ns = */ 80,
|
||||
/* write_pulse_width_ns = */ 80,
|
||||
/* tile_width = */ 32,
|
||||
/* tile_hight = */ 8,
|
||||
/* default_x_offset = */ 0,
|
||||
/* flipmode_x_offset = */ 0,
|
||||
/* pixel_width = */ 256,
|
||||
/* pixel_height = */ 64
|
||||
};
|
||||
|
||||
/* 256x64 */
|
||||
static const uint8_t u8x8_d_t6963_256x64_init_seq[] = {
|
||||
U8X8_DLY(100),
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_DLY(100),
|
||||
|
||||
U8X8_AAC(0x00,0x00,0x021), /* low, high, set cursor pos */
|
||||
U8X8_AAC(0x00,0x00,0x022), /* low, high, set offset */
|
||||
U8X8_AAC(0x00,0x00,0x040), /* low, high, set text home */
|
||||
U8X8_AAC(256/8,0x00,0x041), /* low, high, set text columns */
|
||||
U8X8_AAC(0x00,0x00,0x042), /* low, high, graphics home */
|
||||
U8X8_AAC(256/8,0x00,0x043), /* low, high, graphics columns */
|
||||
U8X8_DLY(2), /* delay 2ms */
|
||||
// mode set
|
||||
// 0x080: Internal CG, OR Mode
|
||||
// 0x081: Internal CG, EXOR Mode
|
||||
// 0x083: Internal CG, AND Mode
|
||||
// 0x088: External CG, OR Mode
|
||||
// 0x089: External CG, EXOR Mode
|
||||
// 0x08B: External CG, AND Mode
|
||||
U8X8_C(0x080), /* mode register: OR Mode, Internal Character Mode */
|
||||
// display mode
|
||||
// 0x090: Display off
|
||||
// 0x094: Graphic off, text on, cursor off, blink off
|
||||
// 0x096: Graphic off, text on, cursor on, blink off
|
||||
// 0x097: Graphic off, text on, cursor on, blink on
|
||||
// 0x098: Graphic on, text off, cursor off, blink off
|
||||
// 0x09a: Graphic on, text off, cursor on, blink off
|
||||
// ...
|
||||
// 0x09c: Graphic on, text on, cursor off, blink off
|
||||
// 0x09f: Graphic on, text on, cursor on, blink on
|
||||
U8X8_C(0x090), /* All Off */
|
||||
U8X8_AAC(0x00,0x00,0x024), /* low, high, set adr pointer */
|
||||
|
||||
U8X8_DLY(100),
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_DLY(100),
|
||||
};
|
||||
|
||||
uint8_t u8x8_d_t6963_256x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_t6963_256x64_display_info);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_256x64_init_seq);
|
||||
break;
|
||||
default:
|
||||
return u8x8_d_t6963_common(u8x8, msg, arg_int, arg_ptr);
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
/*=============================================*/
|
||||
|
||||
static const u8x8_display_info_t u8x8_t6963_128x64_display_info =
|
||||
{
|
||||
/* chip_enable_level = */ 1,
|
||||
/* chip_disable_level = */ 0,
|
||||
|
||||
/* post_chip_enable_wait_ns = */ 10, /* T6963 Datasheet p30 */
|
||||
/* pre_chip_disable_wait_ns = */ 100, /* T6963 Datasheet p30 */
|
||||
/* reset_pulse_width_ms = */ 1,
|
||||
/* post_reset_wait_ms = */ 6,
|
||||
/* sda_setup_time_ns = */ 20,
|
||||
/* sck_pulse_width_ns = */ 140,
|
||||
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
||||
/* spi_mode = */ 0,
|
||||
/* i2c_bus_clock_100kHz = */ 4,
|
||||
/* data_setup_time_ns = */ 80,
|
||||
/* write_pulse_width_ns = */ 80,
|
||||
/* tile_width = */ 16,
|
||||
/* tile_hight = */ 8,
|
||||
/* default_x_offset = */ 0,
|
||||
/* flipmode_x_offset = */ 0,
|
||||
/* pixel_width = */ 128,
|
||||
/* pixel_height = */ 64
|
||||
};
|
||||
|
||||
/* 128x64 */
|
||||
static const uint8_t u8x8_d_t6963_128x64_init_seq[] = {
|
||||
U8X8_DLY(100),
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_DLY(100),
|
||||
|
||||
U8X8_AAC(0x00,0x00,0x021), /* low, high, set cursor pos */
|
||||
U8X8_AAC(0x00,0x00,0x022), /* low, high, set offset */
|
||||
U8X8_AAC(0x00,0x00,0x040), /* low, high, set text home */
|
||||
U8X8_AAC(128/8,0x00,0x041), /* low, high, set text columns */
|
||||
U8X8_AAC(0x00,0x00,0x042), /* low, high, graphics home */
|
||||
U8X8_AAC(128/8,0x00,0x043), /* low, high, graphics columns */
|
||||
U8X8_DLY(2), /* delay 2ms */
|
||||
// mode set
|
||||
// 0x080: Internal CG, OR Mode
|
||||
// 0x081: Internal CG, EXOR Mode
|
||||
// 0x083: Internal CG, AND Mode
|
||||
// 0x088: External CG, OR Mode
|
||||
// 0x089: External CG, EXOR Mode
|
||||
// 0x08B: External CG, AND Mode
|
||||
U8X8_C(0x080), /* mode register: OR Mode, Internal Character Mode */
|
||||
// display mode
|
||||
// 0x090: Display off
|
||||
// 0x094: Graphic off, text on, cursor off, blink off
|
||||
// 0x096: Graphic off, text on, cursor on, blink off
|
||||
// 0x097: Graphic off, text on, cursor on, blink on
|
||||
// 0x098: Graphic on, text off, cursor off, blink off
|
||||
// 0x09a: Graphic on, text off, cursor on, blink off
|
||||
// ...
|
||||
// 0x09c: Graphic on, text on, cursor off, blink off
|
||||
// 0x09f: Graphic on, text on, cursor on, blink on
|
||||
U8X8_C(0x090), /* All Off */
|
||||
U8X8_AAC(0x00,0x00,0x024), /* low, high, set adr pointer */
|
||||
|
||||
U8X8_DLY(100),
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_DLY(100),
|
||||
};
|
||||
|
||||
uint8_t u8x8_d_t6963_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_t6963_128x64_display_info);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_128x64_init_seq);
|
||||
break;
|
||||
default:
|
||||
return u8x8_d_t6963_common(u8x8, msg, arg_int, arg_ptr);
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*=============================================*/
|
||||
|
||||
static const u8x8_display_info_t u8x8_t6963_160x80_display_info =
|
||||
{
|
||||
/* chip_enable_level = */ 0,
|
||||
/* chip_disable_level = */ 1,
|
||||
|
||||
/* post_chip_enable_wait_ns = */ 10, /* T6963 Datasheet p30 */
|
||||
/* pre_chip_disable_wait_ns = */ 100, /* T6963 Datasheet p30 */
|
||||
/* reset_pulse_width_ms = */ 1,
|
||||
/* post_reset_wait_ms = */ 6,
|
||||
/* sda_setup_time_ns = */ 20,
|
||||
/* sck_pulse_width_ns = */ 140,
|
||||
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
||||
/* spi_mode = */ 0,
|
||||
/* i2c_bus_clock_100kHz = */ 4,
|
||||
/* data_setup_time_ns = */ 80,
|
||||
/* write_pulse_width_ns = */ 80,
|
||||
/* tile_width = */ 20,
|
||||
/* tile_hight = */ 10,
|
||||
/* default_x_offset = */ 0,
|
||||
/* flipmode_x_offset = */ 0,
|
||||
/* pixel_width = */ 160,
|
||||
/* pixel_height = */ 80
|
||||
};
|
||||
|
||||
/* 128x64 */
|
||||
static const uint8_t u8x8_d_t6963_160x80_init_seq[] = {
|
||||
U8X8_DLY(100),
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_DLY(100),
|
||||
|
||||
U8X8_AAC(0x00,0x00,0x021), /* low, high, set cursor pos */
|
||||
U8X8_AAC(0x00,0x00,0x022), /* low, high, set offset */
|
||||
U8X8_AAC(0x00,0x00,0x040), /* low, high, set text home */
|
||||
U8X8_AAC(160/8,0x00,0x041), /* low, high, set text columns */
|
||||
U8X8_AAC(0x00,0x00,0x042), /* low, high, graphics home */
|
||||
U8X8_AAC(160/8,0x00,0x043), /* low, high, graphics columns */
|
||||
U8X8_DLY(2), /* delay 2ms */
|
||||
// mode set
|
||||
// 0x080: Internal CG, OR Mode
|
||||
// 0x081: Internal CG, EXOR Mode
|
||||
// 0x083: Internal CG, AND Mode
|
||||
// 0x088: External CG, OR Mode
|
||||
// 0x089: External CG, EXOR Mode
|
||||
// 0x08B: External CG, AND Mode
|
||||
U8X8_C(0x080), /* mode register: OR Mode, Internal Character Mode */
|
||||
// display mode
|
||||
// 0x090: Display off
|
||||
// 0x094: Graphic off, text on, cursor off, blink off
|
||||
// 0x096: Graphic off, text on, cursor on, blink off
|
||||
// 0x097: Graphic off, text on, cursor on, blink on
|
||||
// 0x098: Graphic on, text off, cursor off, blink off
|
||||
// 0x09a: Graphic on, text off, cursor on, blink off
|
||||
// ...
|
||||
// 0x09c: Graphic on, text on, cursor off, blink off
|
||||
// 0x09f: Graphic on, text on, cursor on, blink on
|
||||
U8X8_C(0x090), /* All Off */
|
||||
U8X8_AAC(0x00,0x00,0x024), /* low, high, set adr pointer */
|
||||
|
||||
U8X8_DLY(100),
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_DLY(100),
|
||||
};
|
||||
|
||||
uint8_t u8x8_d_t6963_160x80(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_t6963_160x80_display_info);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_160x80_init_seq);
|
||||
break;
|
||||
default:
|
||||
return u8x8_d_t6963_common(u8x8, msg, arg_int, arg_ptr);
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
/* alternative version for the 128x64 t6963 display: use the 160x80 init sequence */
|
||||
uint8_t u8x8_d_t6963_128x64_alt(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_t6963_128x64_display_info);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_t6963_160x80_init_seq);
|
||||
break;
|
||||
default:
|
||||
return u8x8_d_t6963_common(u8x8, msg, arg_int, arg_ptr);
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user