feat: 全量同步 254 个常用的 Arduino 扩展库文件

arduino-libs/arduino-cli/libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino

@@ -0,0 +1,44 @@
+
+/*
+ Stepper Motor Control - one revolution
+
+ This program drives a unipolar or bipolar stepper motor.
+ The motor is attached to digital pins 8 - 11 of the Arduino.
+
+ The motor should revolve one revolution in one direction, then
+ one revolution in the other direction.
+
+
+ Created 11 Mar. 2007
+ Modified 30 Nov. 2009
+ by Tom Igoe
+
+ */
+
+#include <Stepper.h>
+
+const int stepsPerRevolution = 200;  // change this to fit the number of steps per revolution
+// for your motor
+
+// initialize the stepper library on pins 8 through 11:
+Stepper myStepper(stepsPerRevolution, 8, 9, 10, 11);
+
+void setup() {
+  // set the speed at 60 rpm:
+  myStepper.setSpeed(60);
+  // initialize the serial port:
+  Serial.begin(9600);
+}
+
+void loop() {
+  // step one revolution  in one direction:
+  Serial.println("clockwise");
+  myStepper.step(stepsPerRevolution);
+  delay(500);
+
+  // step one revolution in the other direction:
+  Serial.println("counterclockwise");
+  myStepper.step(-stepsPerRevolution);
+  delay(500);
+}
+