feat: 全量同步 254 个常用的 Arduino 扩展库文件

arduino-libs/arduino-cli/libraries/OneButton/examples/TwoButtons/TwoButtons.ino

@@ -0,0 +1,142 @@
+/*
+ This is a sample sketch to show how to use the OneButtonLibrary
+ to detect click events on 2 buttons in parallel. 
+ The library internals are explained at
+ http://www.mathertel.de/Arduino/OneButtonLibrary.aspx
+ 
+ Setup a test circuit:
+ * Connect a pushbutton to pin A1 (ButtonPin) and ground.
+ * Connect a pushbutton to pin A2 (ButtonPin) and ground.
+ * The Serial interface is used for output the detected button events.
+ 
+ The Sketch shows how to setup the library and bind 2 buttons to their functions.
+ In the loop function the button1.tick and button2.tick functions have to be called as often as you like.
+ */
+
+// 01.03.2014 created by Matthias Hertel
+// ... and working.
+
+/* Sample output:
+
+Starting TwoButtons...
+Button 1 click.
+Button 2 click.
+Button 1 doubleclick.
+Button 2 doubleclick.
+Button 1 longPress start
+Button 1 longPress...
+Button 1 longPress...
+Button 1 longPress...
+Button 1 longPress stop
+Button 2 longPress start
+Button 2 longPress...
+Button 2 longPress...
+Button 2 longPress stop
+
+*/
+
+#include "OneButton.h"
+
+// Setup a new OneButton on pin A1.  
+OneButton button1(A1, true);
+// Setup a new OneButton on pin A2.  
+OneButton button2(A2, true);
+
+
+// setup code here, to run once:
+void setup() {
+  // Setup the Serial port. see http://arduino.cc/en/Serial/IfSerial
+  Serial.begin(115200);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+  Serial.println("Starting TwoButtons...");
+
+  // link the button 1 functions.
+  button1.attachClick(click1);
+  button1.attachDoubleClick(doubleclick1);
+  button1.attachLongPressStart(longPressStart1);
+  button1.attachLongPressStop(longPressStop1);
+  button1.attachDuringLongPress(longPress1);
+
+  // link the button 2 functions.
+  button2.attachClick(click2);
+  button2.attachDoubleClick(doubleclick2);
+  button2.attachLongPressStart(longPressStart2);
+  button2.attachLongPressStop(longPressStop2);
+  button2.attachDuringLongPress(longPress2);
+
+} // setup
+
+
+// main code here, to run repeatedly: 
+void loop() {
+  // keep watching the push buttons:
+  button1.tick();
+  button2.tick();
+
+  // You can implement other code in here or just wait a while 
+  delay(10);
+} // loop
+
+
+// ----- button 1 callback functions
+
+// This function will be called when the button1 was pressed 1 time (and no 2. button press followed).
+void click1() {
+  Serial.println("Button 1 click.");
+} // click1
+
+
+// This function will be called when the button1 was pressed 2 times in a short timeframe.
+void doubleclick1() {
+  Serial.println("Button 1 doubleclick.");
+} // doubleclick1
+
+
+// This function will be called once, when the button1 is pressed for a long time.
+void longPressStart1() {
+  Serial.println("Button 1 longPress start");
+} // longPressStart1
+
+
+// This function will be called often, while the button1 is pressed for a long time.
+void longPress1() {
+  Serial.println("Button 1 longPress...");
+} // longPress1
+
+
+// This function will be called once, when the button1 is released after beeing pressed for a long time.
+void longPressStop1() {
+  Serial.println("Button 1 longPress stop");
+} // longPressStop1
+
+
+// ... and the same for button 2:
+
+void click2() {
+  Serial.println("Button 2 click.");
+} // click2
+
+
+void doubleclick2() {
+  Serial.println("Button 2 doubleclick.");
+} // doubleclick2
+
+
+void longPressStart2() {
+  Serial.println("Button 2 longPress start");
+} // longPressStart2
+
+
+void longPress2() {
+  Serial.println("Button 2 longPress...");
+} // longPress2
+
+void longPressStop2() {
+  Serial.println("Button 2 longPress stop");
+} // longPressStop2
+
+
+// End
+