feat: 全量同步 254 个常用的 Arduino 扩展库文件

arduino-libs/arduino-cli/libraries/IRremoteESP8266/src/ir_Teco.h

@@ -0,0 +1,176 @@
+// Copyright 2019 Fabien Valthier
+
+/// @file
+/// @brief Support for Teco protocols.
+
+// Supports:
+//   Brand: Alaska,  Model: SAC9010QC A/C
+//   Brand: Alaska,  Model: SAC9010QC remote
+
+#ifndef IR_TECO_H_
+#define IR_TECO_H_
+
+#ifndef UNIT_TEST
+#include <Arduino.h>
+#endif
+#include "IRremoteESP8266.h"
+#include "IRsend.h"
+#ifdef UNIT_TEST
+#include "IRsend_test.h"
+#endif
+
+// Constants.
+const uint8_t kTecoAuto = 0;
+const uint8_t kTecoCool = 1;
+const uint8_t kTecoDry = 2;
+const uint8_t kTecoFan = 3;
+const uint8_t kTecoHeat = 4;
+const uint8_t kTecoFanAuto = 0;  // 0b00
+const uint8_t kTecoFanLow = 1;   // 0b01
+const uint8_t kTecoFanMed = 2;   // 0b10
+const uint8_t kTecoFanHigh = 3;  // 0b11
+const uint8_t kTecoMinTemp = 16;   // 16C
+const uint8_t kTecoMaxTemp = 30;   // 30C
+
+const uint8_t kTecoModeOffset = 0;
+const uint8_t kTecoPowerOffset = 3;
+const uint8_t kTecoFanOffset = 4;
+const uint8_t kTecoFanSize = 2;  // Nr. of bits
+const uint8_t kTecoSwingOffset = 6;
+const uint8_t kTecoSleepOffset = 7;
+const uint8_t kTecoTempOffset = 8;
+const uint8_t kTecoTempSize = 4;  // Nr. of bits
+const uint8_t kTecoTimerHalfHourOffset = 12;
+const uint8_t kTecoTimerTensHoursOffset = 13;
+const uint8_t kTecoTimerTensHoursSize = 2;  // Nr. of bits
+const uint8_t kTecoTimerOnOffset = 15;
+const uint8_t kTecoTimerUnitHoursOffset = 16;
+const uint8_t kTecoTimerUnitHoursSize = 4;  // Nr. of bits
+const uint8_t kTecoHumidOffset = 20;
+const uint8_t kTecoLightOffset = 21;
+const uint8_t kTecoSaveOffset = 23;
+const uint64_t kTecoReset =      0b01001010000000000000010000000000000;
+/*
+  (header mark and space)
+        Teco AC map read and to be sent in LSB with number of bits
+
+  byte 0 = Cst 0x02
+  byte 1 = Cst 0x50
+    b6-7 = "AIR" 0, 1, 2 (Not Implemented)
+  byte 2:
+    b0 = Save
+    b1 = "Tree with bubbles" / Filter?? (Not Implemented)
+    b2 = Light/LED.
+    b3 = Humid
+    b4-7 = Timer hours (unit, not thenth)
+      hours:
+        0000 (0) = +0 hour
+        0001 (1) = +1 hour
+        ...
+        1001 (9) = +9 hours
+  byte 3: = timer and Temperature
+    b0 = Timer (1 = On, 0 = Off)
+    b1-2 = Timer - number of 10hours
+      10Hours:
+        00 = 0 * 10hours of timer
+        01 = 1 * 10 hours of timer
+        10 = 2 * 10hours of timer
+    b3 = Timer - half hour (1=half hour on, 0 = round hour)
+    b4-7: Degrees C.
+      0000 (0) = 16C
+      0001 (1) = 17C
+      0010 (2) = 18C
+      ...
+      1101 (13) = 29C
+      1110 (14) = 30C
+  byte 4: Basics
+    b0 = Sleep Mode (1 = On, 0 = Off)
+    b1 = Vent swing (1 = On, 0 = Off)
+    b2-3 = Fan
+      Fan:
+        00 = Auto
+        01 = Fan 1
+        10 = Fan 2
+        11 = Fan 3 or higher
+    b4 = Power Status (1 = On, 0 = Off)
+    b5-7 = Modes LSB first
+      Modes:
+        000 = Auto (temp = 25C)
+        001 = Cool
+        010 = Dry (temp = 25C, but not shown)
+        011 = Fan
+        100 = Heat
+*/
+
+// Classes
+/// Class for handling detailed Teco A/C messages.
+class IRTecoAc {
+ public:
+  explicit IRTecoAc(const uint16_t pin, const bool inverted = false,
+                    const bool use_modulation = true);
+  void stateReset(void);
+#if SEND_TECO
+  void send(const uint16_t repeat = kTecoDefaultRepeat);
+  /// Run the calibration to calculate uSec timing offsets for this platform.
+  /// @return The uSec timing offset needed per modulation of the IR Led.
+  /// @note This will produce a 65ms IR signal pulse at 38kHz.
+  ///   Only ever needs to be run once per object instantiation, if at all.
+  int8_t calibrate(void) { return _irsend.calibrate(); }
+#endif  // SEND_TECO
+  void begin(void);
+  void on(void);
+  void off(void);
+
+  void setPower(const bool on);
+  bool getPower(void);
+
+  void setTemp(const uint8_t temp);
+  uint8_t getTemp(void);
+
+  void setFan(const uint8_t fan);
+  uint8_t getFan(void);
+
+  void setMode(const uint8_t mode);
+  uint8_t getMode(void);
+
+  void setSwing(const bool on);
+  bool getSwing(void);
+
+  void setSleep(const bool on);
+  bool getSleep(void);
+
+  void setLight(const bool on);
+  bool getLight(void);
+
+  void setHumid(const bool on);
+  bool getHumid(void);
+
+  void setSave(const bool on);
+  bool getSave(void);
+
+  uint16_t getTimer(void);
+  void setTimer(const uint16_t mins);
+
+  uint64_t getRaw(void);
+  void setRaw(const uint64_t new_code);
+
+  uint8_t convertMode(const stdAc::opmode_t mode);
+  uint8_t convertFan(const stdAc::fanspeed_t speed);
+  static stdAc::opmode_t toCommonMode(const uint8_t mode);
+  static stdAc::fanspeed_t toCommonFanSpeed(const uint8_t speed);
+  stdAc::state_t toCommon(void);
+  String toString(void);
+#ifndef UNIT_TEST
+
+ private:
+  IRsend _irsend;  ///< Instance of the IR send class
+#else  // UNIT_TEST
+  /// @cond IGNORE
+  IRsendTest _irsend;  ///< Instance of the testing IR send class
+  /// @endcond
+#endif  // UNIT_TEST
+  uint64_t remote_state;  ///< The state of the IR remote in IR code form.
+  bool getTimerEnabled(void);
+};
+
+#endif  // IR_TECO_H_