feat: 全量同步 254 个常用的 Arduino 扩展库文件

arduino-libs/arduino-cli/libraries/Blynk/tests/BlynkBuildTest/BlynkBuildTest.ino

@@ -0,0 +1,105 @@
+/**************************************************************
+ * This is just a test of Blynk library build in Arduino IDE
+ *
+ *         You should NOT flash this program
+ *         to your hardware or try to run it.
+ *
+ **************************************************************/
+
+#if defined(ARDUINO_AVR_GEMMA) \
+  || defined(ARDUINO_attiny) \
+  || defined(ARDUINO_AVR_TRINKET3) \
+  || defined(ARDUINO_AVR_TRINKET5) \
+  || defined(ARDUINO_AVR_DIGISPARK)
+
+  #define BLYNK_NO_INFO
+  #define BLYNK_NO_BUILTIN
+
+  #define SKIP_WRITES_TEST
+
+#endif
+
+#include <BlynkSimpleUserDefined.h>
+
+char auth[] = "12345678901234567890123456789012";
+
+volatile uint8_t test;
+
+// This function is used by Blynk to receive data
+size_t BlynkStreamRead(void* buf, size_t len)
+{
+  uint8_t* byte_buff = (uint8_t*)buf;
+  size_t res = len;
+  while (len--) {
+    *byte_buff++ = test;
+  }
+  return res;
+}
+
+// This function is used by Blynk to send data
+size_t BlynkStreamWrite(const void* buf, size_t len)
+{
+  uint8_t* byte_buff = (uint8_t*)buf;
+  size_t res = len;
+  while (len--) {
+    test = *byte_buff++;
+  }
+  return res;
+}
+
+void setup()
+{
+  Blynk.begin(auth);
+  Blynk.connect();
+}
+
+BLYNK_WRITE(V3)
+{
+  test = param.asInt();
+}
+
+BLYNK_READ(V4)
+{
+  Blynk.virtualWrite(V10, millis(), BlynkFreeRam());
+
+  Blynk.virtualWrite(V10, 1,   1U);
+  Blynk.virtualWrite(V10, 1L,  1UL);
+  Blynk.virtualWrite(V10, 1LL, 1ULL);
+
+#ifndef SKIP_WRITES_TEST
+
+  Blynk.virtualWrite(V10,  (int8_t)1,  (uint8_t)1);
+  Blynk.virtualWrite(V10, (int16_t)1, (uint16_t)1);
+  Blynk.virtualWrite(V10, (int32_t)1, (uint32_t)1);
+  //Blynk.virtualWrite(V10, (int64_t)1, (uint64_t)1);
+
+  Blynk.virtualWrite(V10, (size_t)1);
+
+#ifndef BLYNK_NO_FLOAT
+  Blynk.virtualWrite(V10, (float)1.0F);
+  Blynk.virtualWrite(V10, (double)1.0);
+#endif
+
+  Blynk.virtualWrite(V10, String("Some string as String)"));
+  Blynk.virtualWrite(V10, "Some string from RAM");
+
+  Blynk.virtualWrite(V10, BLYNK_F("Some string from Flash"));
+
+  BlynkParamAllocated param(128);
+  Blynk.virtualWrite(V10, param);
+
+  Blynk.virtualWriteBinary(V10, "buffer", 6);
+
+#endif
+
+}
+
+void loop()
+{
+  bool hasIncomingData = (test > 0);
+
+  if (!Blynk.run(hasIncomingData)) {
+
+  }
+}
+

arduino-libs/arduino-cli/libraries/Blynk/tests/BlynkFootprintTest/BlynkFootprintTest.ino

@@ -0,0 +1,86 @@
+/**************************************************************
+ * This is just a test of Blynk library memory footprint.
+ * It doesn't use serial, wifi, ethernet or any other library.
+ * It uses a volatile variable to simulate server stream.
+ *
+ *         You should NOT flash this program
+ *         to your hardware or try to run it.
+ *
+ **************************************************************/
+
+//#define ENABLE_MINIMIZATION
+#define ENABLE_HANDLERS
+
+#ifdef ENABLE_MINIMIZATION
+  #define BLYNK_NO_BUILTIN
+  #define BLYNK_NO_INFO
+  #define BLYNK_NO_FLOAT
+#endif
+
+#include <BlynkSimpleUserDefined.h>
+
+char auth[] = "12345678901234567890123456789012";
+
+volatile uint8_t test;
+
+// This function is used by Blynk to receive data
+size_t BlynkStreamRead(void* buf, size_t len)
+{
+  uint8_t* byte_buff = (uint8_t*)buf;
+  size_t res = len;
+  while (len--) {
+    *byte_buff++ = test;
+  }
+  return res;
+}
+
+// This function is used by Blynk to send data
+size_t BlynkStreamWrite(const void* buf, size_t len)
+{
+  uint8_t* byte_buff = (uint8_t*)buf;
+  size_t res = len;
+  while (len--) {
+    test = *byte_buff++;
+  }
+  return res;
+}
+
+void setup()
+{
+  Blynk.begin(auth);
+  Blynk.connect();
+}
+
+#ifdef ENABLE_HANDLERS
+
+BLYNK_CONNECTED()
+{
+  test = 1;
+}
+
+BLYNK_DISCONNECTED()
+{
+  test = 2;
+}
+
+BLYNK_WRITE(V3)
+{
+  test = param.asInt();
+}
+
+BLYNK_READ(V4)
+{
+  Blynk.virtualWrite(V4, millis(), BlynkFreeRam());
+}
+
+#endif /* ENABLE_HANDLERS */
+
+void loop()
+{
+  bool hasIncomingData = (test > 0);
+
+  if (!Blynk.run(hasIncomingData)) {
+
+  }
+}
+

arduino-libs/arduino-cli/libraries/Blynk/tests/GenerateJSON/GenerateJSON.ino

@@ -0,0 +1,183 @@
+#include <Blynk.h>
+#include <Blynk/BlynkDetectDevice.h>
+
+/*
+ * Pins Quantity
+ */
+
+#if defined(NUM_DIGITAL_PINS)
+  #define BOARD_DIGITAL_MAX int(NUM_DIGITAL_PINS)
+#elif defined(PINS_COUNT)
+  #define BOARD_DIGITAL_MAX int(PINS_COUNT)
+#else
+  #warning "BOARD_DIGITAL_MAX not detected"
+  #define BOARD_DIGITAL_MAX 32
+#endif
+
+#if defined(NUM_ANALOG_INPUTS)
+  #define BOARD_ANALOG_IN_MAX int(NUM_ANALOG_INPUTS)
+#else
+  #warning "BOARD_ANALOG_IN_MAX not detected"
+  #define BOARD_ANALOG_IN_MAX 0
+#endif
+
+#if defined(BLYNK_USE_128_VPINS)
+  #define BOARD_VIRTUAL_MAX 127
+#else
+  #define BOARD_VIRTUAL_MAX 31
+#endif
+
+/*
+ * Pins Functions
+ */
+
+#ifndef digitalPinHasPWM
+  #warning "No digitalPinHasPWM"
+  #define digitalPinHasPWM(x) false
+#endif
+
+#if !defined(analogInputToDigitalPin)
+  #warning "No analogInputToDigitalPin"
+  #define analogInputToDigitalPin(x) -1
+#endif
+
+/*
+ * Pins Ranges
+ */
+
+#if !defined(BOARD_PWM_MAX)
+  #if   defined(PWMRANGE)
+    #define BOARD_PWM_MAX    PWMRANGE
+  #elif defined(PWM_RESOLUTION)
+    #define BOARD_PWM_MAX    ((2^(PWM_RESOLUTION))-1)
+  #else
+    #warning "Cannot detect BOARD_PWM_MAX"
+    #define BOARD_PWM_MAX    255
+  #endif
+#endif
+
+#if !defined(BOARD_ANALOG_MAX)
+  #if   defined(ADC_RESOLUTION)
+    #define BOARD_ANALOG_MAX    ((2^(ADC_RESOLUTION))-1)
+  #else
+    #warning "Cannot detect BOARD_ANALOG_MAX"
+    #define BOARD_ANALOG_MAX    1023
+  #endif
+#endif
+
+#if defined(clockCyclesPerMicrosecond)
+  #define BOARD_INFO_MHZ clockCyclesPerMicrosecond()
+#elif defined(F_CPU)
+  #define BOARD_INFO_MHZ ((F_CPU)/1000000UL)
+#endif
+
+
+struct Ser {
+  template<typename T, typename... Args>
+  void print(T last) {
+    Serial.print(last);
+  }
+
+  template<typename T, typename... Args>
+  void print(T head, Args... tail) {
+    Serial.print(head);
+    print(tail...);
+  }
+} ser;
+
+const char* JS[] = {
+  "\n"
+  "{\n"
+  "    ",
+  "\"map\": {\n"
+  "        \"digital\": {\n"
+  "            \"pins\": {\n"
+  "                 ", "\n"
+  "            },\n"
+  "            \"ops\": [ \"dr\", \"dw\" ]\n"
+  "        },\n"
+  "        \"analog\": {\n"
+  "            \"pins\": {\n"
+  "                 ", "\n"
+  "            },\n"
+  "            \"ops\": [ \"dr\", \"dw\", \"ar\" ],\n"
+  "            \"arRange\": [ 0, ", " ]\n"
+  "        },\n"
+  "        \"pwm\": {\n"
+  "            \"pins\": [\n"
+  "                ", "\n"
+  "            ],\n"
+  "            \"ops\": [ \"aw\" ],\n"
+  "            \"awRange\": [ 0, ", " ]\n"
+  "        },\n"
+  "        \"virtual\":  {\n"
+  "            \"pinsRange\": [ 0, ", " ],\n"
+  "            \"ops\": [ \"vr\", \"vw\" ]\n"
+  "        }\n"
+  "    }\n"
+  "}\n"
+};
+
+
+
+void setup() {
+  Serial.begin(9600);
+  delay(10);
+}
+
+void loop() {
+  ser.print(JS[0]);
+  ser.print("\"name\": \"", BLYNK_INFO_DEVICE, "\",\n    ");
+#ifdef BLYNK_INFO_CPU
+  ser.print("\"cpu\": \"",  BLYNK_INFO_CPU, "\",\n    ");
+#endif
+#ifdef BOARD_INFO_MHZ
+  ser.print("\"mhz\": ",  BOARD_INFO_MHZ, ",\n    ");
+#endif
+  ser.print(JS[1]);
+
+  for (int i = 0; i < BOARD_DIGITAL_MAX; i++) {
+    ser.print("\"D", i, "\": ", i);
+    if (i % 5 != 4) {
+      ser.print(", ");
+    } else {
+      ser.print(",\n                 ");
+    }
+  }
+
+  ser.print(JS[2]);
+
+  for (int i = 0; i < BOARD_ANALOG_IN_MAX; i++) {
+    int pin = analogInputToDigitalPin(i);
+    if (pin != -1) {
+      ser.print("\"A", i, "\": ", pin);
+      if (i % 5 != 4) {
+        ser.print(", ");
+      } else {
+        ser.print(",\n                 ");
+      }
+    }
+  }
+
+  ser.print(JS[3]);
+  ser.print(BOARD_ANALOG_MAX);
+  ser.print(JS[4]);
+
+  for (int i = 0; i < BOARD_DIGITAL_MAX; i++) {
+    bool hasPWM = digitalPinHasPWM(i);
+    //bool hasInt = digitalPinToInterrupt(i) != NOT_AN_INTERRUPT;
+
+    if (hasPWM) {
+      ser.print("\"D", i, "\", ");
+    }
+  }
+
+  ser.print(JS[5]);
+  ser.print(BOARD_PWM_MAX);
+  ser.print(JS[6]);
+  ser.print(BOARD_VIRTUAL_MAX);
+  ser.print(JS[7]);
+
+  delay(10000);
+}
+

arduino-libs/arduino-cli/libraries/Blynk/tests/SerialXconnect/SerialXconnect.ino

@@ -0,0 +1,73 @@
+/*
+ * This utility allows you to cross-connect two serial channels
+ * using any Arduino-compatible hardware.
+ *
+ * This is usefull for:
+ *   Checking wiring
+ *   Converting baud rate
+ *   Sending AT commands
+ *   etc.
+ *
+ * Popular AT command sets:
+ *   ESP8266: http://www.espressif.com/sites/default/files/4a-esp8266_at_instruction_set_en_v1.5.4_0.pdf
+ *   SIM800L: https://www.itead.cc/wiki/images/6/6f/SIM800_Series_AT_Command_Manual_V1.05.pdf
+ *   XBee:    https://cdn.sparkfun.com/learn/materials/29/22AT%20Commands.pdf
+ */
+
+#define ser1 Serial
+
+#if defined(HAVE_HWSERIAL1)
+  #define ser2 Serial1
+#else
+  #warning Using Software Serial!
+  #include <SoftwareSerial.h>
+  SoftwareSerial SerialSw(2, 3);
+  #define ser2 SerialSw
+#endif
+
+void setup() {
+  ser1.begin(9600);
+  while (!ser1);
+  delay(10);
+  ser2.begin(9600);
+  delay(10);
+}
+
+void loop() {
+  if (ser1.available()) {
+    int c = ser1.read();
+    if (!parseCommands(c)) {
+      ser2.write(c);
+    }
+  }
+  if (ser2.available()) {
+    ser1.write(ser2.read());
+  }
+}
+
+/*
+ * Special commands:
+ *   !speed=1000000 (after ESP8266 command: AT+UART_CUR=1000000,8,1,0,0)
+ */
+
+char cmd_prefix[] = "!speed=";
+uint8_t cmd_prefix_idx = 0;
+
+bool parseCommands(int c) {
+  if (c == cmd_prefix[cmd_prefix_idx]) {
+    cmd_prefix_idx++;
+    if (cmd_prefix_idx >= sizeof(cmd_prefix) - 1) {
+      String cmd = ser1.readStringUntil('\n');
+      long baud = cmd.toInt();
+      ser1.print("Speed:"); ser1.println(baud);
+      ser2.begin(baud);
+      cmd_prefix_idx = 0;
+    }
+    return true;
+  } else if (cmd_prefix_idx > 0) {
+    ser2.write(cmd_prefix, cmd_prefix_idx);
+    cmd_prefix_idx = 0;
+  }
+  return false;
+}
+

arduino-libs/arduino-cli/libraries/Blynk/tests/loopback.py

@@ -0,0 +1,176 @@
+#!/usr/bin/env python
+
+"""USAGE: loopback.py [options]
+
+Options:
+  --bind=S      address of server to connect             (default: any)
+  --port=N      serial port, a number or a device name   (defualt: 8888)
+  --sndbuf=N    SO_SNDBUF override                       (default: no override)
+  --rcvbuf=N    SO_RCVBUF override                       (default: no override)
+  --nodelay     enable TCP_NODELAY
+  --msg=S       message content                          (default: 'message')
+  --qty=N       amount of messsages                      (default: 10)
+  --sleep=F     delay between sending messages           (default: 1.0)
+  --freq=N      messages per second (inverse of sleep)   (default: 1)
+
+ This is a pseudo-server that sends predefined pattern to any connected client.
+ It is used to test transport behaviour and throughput.
+
+ Author:   Volodymyr Shymanskyy
+ License:  The MIT license
+"""
+
+import select, socket, struct
+import os, sys, time, getopt
+from threading import Thread
+
+# Configuration options
+
+# Parse command line options
+try:
+    opts, args = getopt.getopt(sys.argv[1:],
+        "hb:p:",
+        ["help", "bind=", "port=", "sndbuf=", "rcvbuf=", "nodelay", "sleep=", "qty=", "freq=", "msg=", "dump"])
+except getopt.GetoptError:
+    print >>sys.stderr, __doc__
+    sys.exit(2)
+
+# Default options
+HOST = ''       # Bind to all interfaces
+PORT = 8888     # Bind to port 8888
+NODELAY = 0     # No TCP_NODELAY
+SNDBUF = 0      # No SNDBUF override
+RCVBUF = 0      # No RCVBUF override
+MSG_QTY = 10    # Amount of messages
+SLEEP = 1.0     # Wait some time between IO
+MSG = "message" # Message
+DUMP = 0
+
+for o, v in opts:
+    if o in ("-h", "--help"):
+        print __doc__
+        sys.exit()
+    elif o in ("-b", "--bind"):
+        HOST = v
+    elif o in ("-p", "--port"):
+        PORT = int(v)
+    elif o in ("--sndbuf",):
+        SNDBUF = int(v)
+    elif o in ("--rcvbuf",):
+        RCVBUF = int(v)
+    elif o in ("--nodelay",):
+        NODELAY = 1
+    elif o in ("--sleep",):
+        SLEEP = float(v)
+    elif o in ("--freq",):
+        SLEEP = 1.0/float(v)
+    elif o in ("--qty",):
+        MSG_QTY = int(v)
+    elif o in ("--msg",):
+        MSG = v
+    elif o in ("--dump",):
+        DUMP = 1
+
+# Print utilities
+
+start_time = time.time()
+def log(msg):
+    print "[{:7.3f}] {:}".format(float(time.time() - start_time), msg)
+
+draw_col = 0
+def draw(c):
+    global draw_col
+    if not DUMP:
+        sys.stdout.write(c)
+        draw_col = (draw_col + 1) % 120
+        if draw_col:
+            sys.stdout.flush()
+        else:
+            sys.stdout.write("\n")
+
+def dump(msg):
+    if DUMP:
+        log(msg)
+
+def receive(sock, length):
+	d = []
+	l = 0
+	while l < length:
+		r = sock.recv(length-l)
+		if not r:
+			return ''
+		d.append(r)
+		l += len(r)
+	return ''.join(d)
+
+# Threads
+
+def readthread(conn, addr):
+	global msgs_in
+	while(msgs_in < MSG_QTY):
+		data = receive(conn, len(MSG))
+		if data != MSG:
+			log("Data is wrong:" + data)
+			#break
+		draw('v')
+		dump("> " + data)
+		msgs_in += 1
+
+
+def writethread(conn, addr):
+    global msgs_out
+    while (msgs_out < MSG_QTY):
+        conn.sendall(MSG)
+        draw('.')
+        dump("< " + MSG)
+        msgs_out += 1
+        time.sleep(SLEEP)
+
+
+# Main code
+
+serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+try:
+    # Set SO_REUSEADDR, this is needed to ignore WAIT state on next run
+    serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    serv.bind((HOST, PORT))
+except socket.error as msg:
+    log('Bind failed. Error Code: {0}, Msg: {1}'.format(str(msg[0]), msg[1]))
+    sys.exit()
+
+serv.listen(1)
+log('Listening on port %d' % PORT)
+
+# Wait for clients
+#while True:
+conn, addr = serv.accept()
+log('Connection from {0}:{1}'.format(addr[0], str(addr[1])))
+if NODELAY != 0:
+	conn.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+if SNDBUF != 0:
+	sndbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF)
+	log('Default SNDBUF %s changed to %s' % (sndbuf, SNDBUF))
+	conn.setsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF, SNDBUF)
+if RCVBUF != 0:
+	rcvbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF)
+	log('Default RCVBUF %s changed to %s' % (rcvbuf, RCVBUF))
+	conn.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, RCVBUF)
+
+proc_start = time.time()
+msgs_in = 0
+msgs_out = 0
+
+wt = Thread(target=readthread,  args=(conn, addr))
+rt = Thread(target=writethread, args=(conn, addr))
+
+wt.start()
+rt.start()
+
+wt.join()
+rt.join()
+
+draw("\n")
+log("Time %3.4f" % (time.time() - proc_start))
+log("Sent {0} messages".format(msgs_out))
+log("Recv {0} messages".format(msgs_in))
+conn.close()

arduino-libs/arduino-cli/libraries/Blynk/tests/pseudo-library.py

@@ -0,0 +1,237 @@
+#!/usr/bin/python
+'''
+ This is a pseudo-library implementation
+ 
+ Example:
+   ./pseudo-library.py -t b168ccc8c8734fad98323247afbc1113 --dump
+
+ Author:   Volodymyr Shymanskyy
+ License:  The MIT license
+'''
+import select, socket, struct
+import os, sys, time, getopt
+from threading import Thread
+
+# Configuration options
+
+# Parse command line options
+try:
+    opts, args = getopt.getopt(sys.argv[1:],
+        "hs:p:t:",
+        ["help", "server=", "port=", "token=", "sndbuf=", "rcvbuf=", "nodelay=", "dump"])
+except getopt.GetoptError:
+    print >>sys.stderr, __doc__
+    sys.exit(2)
+
+# Default options
+SERVER = "blynk-cloud.com"
+PORT = 80
+NODELAY = 1     # TCP_NODELAY
+SNDBUF = 0      # No SNDBUF override
+RCVBUF = 0      # No RCVBUF override
+TOKEN = "YourAuthToken"
+DUMP = 0
+
+for o, v in opts:
+    if o in ("-h", "--help"):
+        print __doc__
+        sys.exit()
+    elif o in ("-s", "--server"):
+        SERVER = v
+    elif o in ("-p", "--port"):
+        PORT = int(v)
+    elif o in ("-t", "--token"):
+        TOKEN = v
+    elif o in ("--sndbuf",):
+        SNDBUF = int(v)
+    elif o in ("--rcvbuf",):
+        RCVBUF = int(v)
+    elif o in ("--nodelay",):
+        NODELAY = int(v)
+    elif o in ("--dump",):
+        DUMP = 1
+
+
+# Blynk protocol helpers
+
+hdr = struct.Struct("!BHH")
+
+class MsgType:
+    RSP    = 0
+    LOGIN  = 2
+    PING   = 6
+    BRIDGE = 15
+    HW     = 20
+
+class MsgStatus:
+    OK     = 200
+
+def hw(*args):
+    # Convert params to string and join using \0
+    data = "\0".join(map(str, args))
+    dump("< " + " ".join(map(str, args)))
+    # Prepend HW command header
+    return hdr.pack(MsgType.HW, genMsgId(), len(data)) + data
+
+def handle_hw(data):
+    params = data.split("\0")
+    cmd = params.pop(0)
+    if cmd == 'info':
+        pass
+
+    ### DIRECT pin operations
+    elif cmd == 'pm':
+        pairs = zip(params[0::2], params[1::2])
+        for (pin, mode) in pairs:
+            pin = int(pin)
+            if mode == 'in':
+                log("Pin %d mode INPUT" % pin)
+            elif mode == 'out':
+                log("Pin %d mode OUTPUT" % pin)
+            elif mode == 'pu':
+                log("Pin %d mode INPUT_PULLUP" % pin)
+            elif mode == 'pd':
+                log("Pin %d mode INPUT_PULLDOWN" % pin)
+            else:
+                log("Unknown pin %d mode: %s" % (pin, mode))
+
+    elif cmd == 'dw':
+        pin = int(params.pop(0))
+        val = params.pop(0)
+        log("Digital write pin %d, value %s" % (pin, val))
+        
+    elif cmd == 'aw':
+        pin = int(params.pop(0))
+        val = params.pop(0)
+        log("Analog write pin %d, value %s" % (pin, val))
+        
+    elif cmd == 'dr':           # This should read digital pin
+        pin = int(params.pop(0))
+        log("Digital read pin %d" % pin)
+        conn.sendall(hw("dw", pin, 1)) # Send value
+
+    elif cmd == 'ar':           # This should do ADC read
+        pin = int(params.pop(0))
+        log("Analog read pin %d" % pin)
+        conn.sendall(hw("aw", pin, 123)) # Send value
+
+    ### VIRTUAL pin operations
+    elif cmd == 'vw':           # This should call user handler
+        pin = int(params.pop(0))
+        val = params.pop(0)
+        log("Virtual write pin %d, value %s" % (pin, val))
+        
+    elif cmd == 'vr':           # This should call user handler
+        pin = int(params.pop(0))
+        log("Virtual read pin %d" % pin)
+        conn.sendall(hw("vw", pin, "hello")) # Send value
+        
+    else:
+        log("Unknown HW cmd: %s" % cmd)
+
+static_msg_id = 1
+def genMsgId():
+    global static_msg_id
+    static_msg_id += 1
+    return static_msg_id
+
+# Other utilities
+
+start_time = time.time()
+def log(msg):
+    print "[{:7.3f}] {:}".format(float(time.time() - start_time), msg)
+
+def dump(msg):
+    if DUMP:
+        log(msg)
+
+def receive(sock, length):
+    d = []
+    l = 0
+    while l < length:
+        r = ''
+        try:
+            r = sock.recv(length-l)
+        except socket.timeout:
+            continue
+        if not r:
+            return ''
+        d.append(r)
+        l += len(r)
+    return ''.join(d)
+
+# Threads
+
+def readthread(conn):
+    while (True):
+        data = receive(conn, hdr.size)
+        if not data:
+            break
+        msg_type, msg_id, msg_len = hdr.unpack(data)
+        dump("Got {0}, {1}, {2}".format(msg_type, msg_id, msg_len))
+        if msg_type == MsgType.RSP:
+            pass
+        elif msg_type == MsgType.PING:
+            log("Got ping")
+            # Send Pong
+            conn.sendall(hdr.pack(MsgType.RSP, msg_id, MsgStatus.OK))
+        elif msg_type == MsgType.HW or msg_type == MsgType.BRIDGE:
+            data = receive(conn, msg_len)
+            # Print HW message
+            dump("> " + " ".join(data.split("\0")))
+            handle_hw(data)
+        else:
+            log("Unknown msg type")
+            break
+
+
+def writethread(conn):
+    while (True):
+        time.sleep(10)
+        log("Sending heartbeat...")
+        conn.sendall(hdr.pack(MsgType.PING, genMsgId(), 0))
+
+# Main code
+log('Connecting to %s:%d' % (SERVER, PORT))
+try:
+    conn = socket.create_connection((SERVER, PORT), 3)
+except:
+    log("Can't connect")
+    sys.exit(1)
+
+if NODELAY != 0:
+    conn.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+if SNDBUF != 0:
+    sndbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF)
+    log('Default SNDBUF %s changed to %s' % (sndbuf, SNDBUF))
+    conn.setsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF, SNDBUF)
+if RCVBUF != 0:
+    rcvbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF)
+    log('Default RCVBUF %s changed to %s' % (rcvbuf, RCVBUF))
+    conn.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, RCVBUF)
+    
+# Authenticate
+conn.sendall(hdr.pack(MsgType.LOGIN, genMsgId(), len(TOKEN)))
+conn.sendall(TOKEN)
+data = receive(conn, hdr.size)
+if not data:
+    log("Auth timeout")
+    sys.exit(1)
+
+msg_type, msg_id, status = hdr.unpack(data)
+dump("Got {0}, {1}, {2}".format(msg_type, msg_id, status))
+
+if status != MsgStatus.OK:
+    log("Auth failed: %d" % status)
+    sys.exit(1)
+
+wt = Thread(target=readthread,  args=(conn,))
+rt = Thread(target=writethread, args=(conn,))
+
+wt.start()
+rt.start()
+
+wt.join()
+rt.join()
+
+conn.close()

arduino-libs/arduino-cli/libraries/Blynk/tests/pseudo-server-ar-mt.py

@@ -0,0 +1,210 @@
+#!/usr/bin/python
+'''
+ This is a pseudo-server that sends predefined pattern to any connected client.
+ It is used to test transport behaviour and throughput.
+
+ If you want to use it with a sketch, connect your PC and Blynk-enabled device
+ into the same network and configure Blynk to connect to this pseudo-server:
+
+   IPAddress serv(192,168,0,105); // IP address of your PC
+   Blynk.begin(auth, serv, 8888);
+
+ Author:   Volodymyr Shymanskyy
+ License:  The MIT license
+'''
+import select, socket, struct
+import os, sys, time, getopt
+from threading import Thread
+
+# Configuration options
+
+# Parse command line options
+try:
+    opts, args = getopt.getopt(sys.argv[1:],
+        "hb:p:",
+        ["help", "bind=", "port=", "sndbuf=", "rcvbuf=", "nodelay", "sleep=", "qty=", "freq=", "pin=", "dump"])
+except getopt.GetoptError:
+    print >>sys.stderr, __doc__
+    sys.exit(2)
+
+# Default options
+HOST = ''       # Bind to all interfaces
+PORT = 8888     # Bind to port 8888
+NODELAY = 0     # No TCP_NODELAY
+SNDBUF = 0      # No SNDBUF override
+RCVBUF = 0      # No RCVBUF override
+MSG_QTY = 10    # Amount of messages
+SLEEP = 1.0     # Wait some time between IO
+HW_PIN = "A0"   # Pin #
+DUMP = 0
+
+for o, v in opts:
+    if o in ("-h", "--help"):
+        print __doc__
+        sys.exit()
+    elif o in ("-b", "--bind"):
+        HOST = v
+    elif o in ("-p", "--port"):
+        PORT = int(v)
+    elif o in ("--sndbuf",):
+        SNDBUF = int(v)
+    elif o in ("--rcvbuf",):
+        RCVBUF = int(v)
+    elif o in ("--nodelay",):
+        NODELAY = 1
+    elif o in ("--sleep",):
+        SLEEP = float(v)
+    elif o in ("--freq",):
+        SLEEP = 1.0/float(v)
+    elif o in ("--qty",):
+        MSG_QTY = int(v)
+    elif o in ("--pin",):
+        HW_PIN = int(v)
+    elif o in ("--dump",):
+        DUMP = 1
+
+
+# Blynk protocol helpers
+
+hdr = struct.Struct("!BHH")
+
+class MsgType:
+    RSP    = 0
+    LOGIN  = 2
+    PING   = 6
+    HW     = 20
+
+class MsgStatus:
+    OK     = 200
+
+def hw(*args):
+    # Convert params to string and join using \0
+    data = "\0".join(map(str, args))
+    dump("< " + " ".join(map(str, args)))
+    # Prepend HW command header
+    return hdr.pack(MsgType.HW, 1, len(data)) + data
+
+# Print utilities
+
+start_time = time.time()
+def log(msg):
+    print "[{:7.3f}] {:}".format(float(time.time() - start_time), msg)
+
+draw_col = 0
+def draw(c):
+    global draw_col
+    if not DUMP:
+        sys.stdout.write(c)
+        draw_col = (draw_col + 1) % 120
+        if draw_col:
+            sys.stdout.flush()
+        else:
+            sys.stdout.write("\n")
+
+def dump(msg):
+    if DUMP:
+        log(msg)
+
+def receive(sock, length):
+	d = []
+	l = 0
+	while l < length:
+		r = sock.recv(length-l)
+		if not r:
+			return ''
+		d.append(r)
+		l += len(r)
+	return ''.join(d)
+
+# Threads
+
+def readthread(conn, addr):
+	global msgs_in, authenticated
+	while(msgs_in < MSG_QTY):
+		data = receive(conn, hdr.size)
+		if not data:
+			break
+		msg_type, msg_id, msg_len = hdr.unpack(data)
+		#dump("Got {0}, {1}, {2}".format(msg_type, msg_id, msg_len))
+		if msg_type == MsgType.RSP:
+			pass
+		elif msg_type == MsgType.LOGIN:
+			auth = receive(conn, msg_len)
+			log("Auth {0}".format(auth))
+			# Send auth OK and pin modes
+			conn.sendall(hdr.pack(MsgType.RSP, msg_id, MsgStatus.OK))
+			conn.sendall(hw("pm", HW_PIN, "in"))
+			authenticated = True
+		elif msg_type == MsgType.PING:
+			log("Ping")
+			# Send Pong
+			conn.sendall(hdr.pack(MsgType.RSP, msg_id, MsgStatus.OK))
+		elif msg_type == MsgType.HW:
+			data = receive(conn, msg_len)
+			# Print HW messages (just for fun :)
+			draw('v')
+			dump("> " + " ".join(data.split("\0")))
+			msgs_in += 1
+		else:
+			log("Unknown msg type")
+			break
+
+
+def writethread(conn, addr):
+	global msgs_out, authenticated
+	while (msgs_out < MSG_QTY):
+		if authenticated:
+			conn.sendall(hw("ar", HW_PIN))
+			draw('.')
+			msgs_out += 1
+		time.sleep(SLEEP)
+
+
+# Main code
+
+serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+try:
+    # Set SO_REUSEADDR, this is needed to ignore WAIT state on next run
+    serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    serv.bind((HOST, PORT))
+except socket.error as msg:
+    log('Bind failed. Error Code: {0}, Msg: {1}'.format(str(msg[0]), msg[1]))
+    sys.exit()
+
+serv.listen(1)
+log('Listening on port %d' % PORT)
+
+# Wait for clients
+#while True:
+conn, addr = serv.accept()
+log('Connection from {0}:{1}'.format(addr[0], str(addr[1])))
+if NODELAY != 0:
+	conn.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+if SNDBUF != 0:
+	sndbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF)
+	log('Default SNDBUF %s changed to %s' % (sndbuf, SNDBUF))
+	conn.setsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF, SNDBUF)
+if RCVBUF != 0:
+	rcvbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF)
+	log('Default RCVBUF %s changed to %s' % (rcvbuf, RCVBUF))
+	conn.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, RCVBUF)
+
+proc_start = time.time()
+msgs_in = 0
+msgs_out = 0
+authenticated = False
+
+wt = Thread(target=readthread,  args=(conn, addr))
+rt = Thread(target=writethread, args=(conn, addr))
+
+wt.start()
+rt.start()
+
+wt.join()
+rt.join()
+
+draw("\n")
+log("Time %3.4f" % (time.time() - proc_start))
+log("Sent {0} messages".format(msgs_out))
+log("Recv {0} messages".format(msgs_in))
+conn.close()

arduino-libs/arduino-cli/libraries/Blynk/tests/pseudo-server-ar-select.py

@@ -0,0 +1,207 @@
+#!/usr/bin/python
+'''
+ This is a pseudo-server that sends predefined pattern to any connected client.
+ It is used to test transport behaviour and throughput.
+
+ If you want to use it with a sketch, connect your PC and Blynk-enabled device
+ into the same network and configure Blynk to connect to this pseudo-server:
+
+   IPAddress serv(192,168,0,105); // IP address of your PC
+   Blynk.begin(auth, serv, 8888);
+
+ Author:   Volodymyr Shymanskyy
+ License:  The MIT license
+'''
+import select, socket, struct
+import os, sys, time, getopt
+from threading import Thread
+
+# Configuration options
+
+# Parse command line options
+opts, args = getopt.getopt(sys.argv[1:],
+    "hb:p:",
+    ["help", "bind=", "port=", "sndbuf=", "rcvbuf=", "nodelay", "wait=", "sleep=", "qty=", "dump"])
+
+# Default options
+HOST = ''       # Bind to all interfaces
+PORT = 8888     # Bind to port 8888
+NODELAY = 0     # No TCP_NODELAY
+SNDBUF = 0      # No SNDBUF override
+RCVBUF = 0      # No RCVBUF override
+WAIT = -1       # No select timeout
+MSG_QTY = 1000  # Amount of messages
+SLEEP = 0       # Wait some time between IO
+HW_PIN = 14     # Pin #
+DUMP = 0
+
+for o, v in opts:
+    if o in ("-h", "--help"):
+        usage()
+        sys.exit()
+    elif o in ("-b", "--bind"):
+        HOST = v
+    elif o in ("-p", "--port"):
+        PORT = int(v)
+    elif o in ("--sndbuf",):
+        SNDBUF = int(v)
+    elif o in ("--rcvbuf",):
+        RCVBUF = int(v)
+    elif o in ("--nodelay",):
+        NODELAY = 1
+    elif o in ("--wait",):
+        WAIT = float(v)
+    elif o in ("--sleep",):
+        SLEEP = float(v)
+    elif o in ("--qty",):
+        MSG_QTY = int(v)
+    elif o in ("--pin",):
+        HW_PIN = int(v)
+    elif o in ("--dump",):
+        DUMP = 1
+
+
+# Blynk protocol helpers
+
+hdr = struct.Struct("!BHH")
+
+class MsgType:
+    RSP    = 0
+    LOGIN  = 2
+    PING   = 6
+    HW     = 20
+
+class MsgStatus:
+    OK     = 200
+
+def hw(*args):
+    # Convert params to string and join using \0
+    data = "\0".join(map(str, args))
+    dump("< " + " ".join(map(str, args)))
+    # Prepend HW command header
+    return hdr.pack(MsgType.HW, 1, len(data)) + data
+
+start_time = time.time()
+def log(msg):
+    print "[{:7.3f}] {:}".format(float(time.time() - start_time), msg)
+
+def draw(c):
+    if not DUMP:
+        sys.stdout.write(c)
+        sys.stdout.flush()
+
+def dump(msg):
+    if DUMP:
+        log(msg)
+
+def receive(sock, length):
+	d = []
+	l = 0
+	while l < length:
+		r = sock.recv(length-l)
+		if not r:
+			return ''
+		d.append(r)
+		l += len(r)
+	return ''.join(d)
+
+
+def clientthread(conn, addr):
+    log('Connection from {0}:{1}'.format(addr[0], str(addr[1])))
+    if NODELAY != 0:
+        conn.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+    if SNDBUF != 0:
+        sndbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF)
+        log('Default SNDBUF %s changed to %s' % (sndbuf, SNDBUF))
+        conn.setsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF, SNDBUF)
+    if RCVBUF != 0:
+        rcvbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF)
+        log('Default RCVBUF %s changed to %s' % (rcvbuf, RCVBUF))
+        conn.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, RCVBUF)
+
+    b = 0
+    msgs_out = 0
+    msgs_in = 0
+    msgs_delta = 0
+    msgs_skip = 0
+    authenticated = False
+
+    proc_start = time.time()
+
+    while(True):
+        if WAIT != -1:
+            rs, ws, es = select.select([conn] , [conn], [conn], WAIT)
+        else:
+            rs, ws, es = select.select([conn] , [conn], [conn])
+        if es:
+            log("Socket error")
+            break;
+        if rs:
+            data = receive(conn, hdr.size)
+            if not data:
+                break
+            msg_type, msg_id, msg_len = hdr.unpack(data)
+            #dump("Got {0}, {1}, {2}".format(msg_type, msg_id, msg_len))
+            if msg_type == MsgType.RSP:
+                pass
+            elif msg_type == MsgType.LOGIN:
+                auth = receive(conn, msg_len)
+                log("Auth {0}".format(auth))
+                # Send auth OK and pin modes
+                conn.sendall(hdr.pack(MsgType.RSP, msg_id, MsgStatus.OK))
+                conn.sendall(hw("pm", HW_PIN, "in"))
+                authenticated = True
+            elif msg_type == MsgType.PING:
+                log("Ping")
+                # Send Pong
+                conn.sendall(hdr.pack(MsgType.RSP, msg_id, MsgStatus.OK))
+            elif msg_type == MsgType.HW:
+                data = receive(conn, msg_len)
+                # Print HW messages (just for fun :)
+                draw('v')
+                dump("> " + " ".join(data.split("\0")))
+                msgs_in += 1
+                if msgs_out >= MSG_QTY:
+                    msgs_delta += 1
+            else:
+                log("Unknown msg type")
+                break
+        if ws:
+            if authenticated and msgs_out < MSG_QTY:
+                conn.sendall(hw("ar", HW_PIN))
+                draw('.')
+                b = (b + 1) % 256
+                msgs_out += 1
+            elif msgs_in >= MSG_QTY:
+                break
+        else:
+            msgs_skip += 1
+
+        time.sleep(SLEEP)
+
+    draw("\n")
+    log("Time %3.4f" % (time.time() - proc_start))
+    log("Sent {0} messages".format(msgs_out))
+    log("Recv {0} messages (delta: {1}, skip: {2})".format(msgs_in, msgs_delta, msgs_skip))
+    conn.close()
+
+# Main code
+
+serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+try:
+    # Set SO_REUSEADDR, this is needed to ignore WAIT state on next run
+    serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    serv.bind((HOST, PORT))
+except socket.error as msg:
+    log('Bind failed. Error Code: {0}, Msg: {1}'.format(str(msg[0]), msg[1]))
+    sys.exit()
+
+serv.listen(10)
+log('Listening on port %d' % PORT)
+
+# Wait for clients
+#while True:
+thread = Thread(target=clientthread, args=serv.accept())
+thread.start()
+serv.close()
+thread.join()

arduino-libs/arduino-cli/libraries/Blynk/tests/pseudo-server-dw-mt.py

@@ -0,0 +1,212 @@
+#!/usr/bin/python
+'''
+ This is a pseudo-server that sends predefined pattern to any connected client.
+ It is used to test transport behaviour and throughput.
+
+ If you want to use it with a sketch, connect your PC and Blynk-enabled device
+ into the same network and configure Blynk to connect to this pseudo-server:
+
+   IPAddress serv(192,168,0,105); // IP address of your PC
+   Blynk.begin(auth, serv, 8888);
+
+ Author:   Volodymyr Shymanskyy
+ License:  The MIT license
+'''
+import select, socket, struct
+import os, sys, time, getopt
+from threading import Thread
+
+# Configuration options
+
+# Parse command line options
+try:
+	opts, args = getopt.getopt(sys.argv[1:],
+	    "hb:p:",
+	    ["help", "bind=", "port=", "sndbuf=", "rcvbuf=", "nodelay", "sleep=", "qty=", "freq=", "pin=", "dump"])
+except getopt.GetoptError:
+	print >>sys.stderr, __doc__
+	sys.exit(2)
+
+# Default options
+HOST = ''       # Bind to all interfaces
+PORT = 8888     # Bind to port 8888
+NODELAY = 0     # No TCP_NODELAY
+SNDBUF = 0      # No SNDBUF override
+RCVBUF = 0      # No RCVBUF override
+MSG_QTY = 10    # Amount of messages
+SLEEP = 1.0     # Wait some time between IO
+HW_PIN = 14     # Pin #
+DUMP = 0
+
+for o, v in opts:
+    if o in ("-h", "--help"):
+        print __doc__
+        sys.exit()
+    elif o in ("-b", "--bind"):
+        HOST = v
+    elif o in ("-p", "--port"):
+        PORT = int(v)
+    elif o in ("--sndbuf",):
+        SNDBUF = int(v)
+    elif o in ("--rcvbuf",):
+        RCVBUF = int(v)
+    elif o in ("--nodelay",):
+        NODELAY = 1
+    elif o in ("--sleep",):
+        SLEEP = float(v)
+    elif o in ("--freq",):
+        SLEEP = 1.0/float(v)
+    elif o in ("--qty",):
+        MSG_QTY = int(v)
+    elif o in ("--pin",):
+        HW_PIN = int(v)
+    elif o in ("--dump",):
+        DUMP = 1
+
+
+# Blynk protocol helpers
+
+hdr = struct.Struct("!BHH")
+
+class MsgType:
+    RSP    = 0
+    LOGIN  = 2
+    PING   = 6
+    HW     = 20
+
+class MsgStatus:
+    OK     = 200
+
+def hw(*args):
+    # Convert params to string and join using \0
+    data = "\0".join(map(str, args))
+    dump("< " + " ".join(map(str, args)))
+    # Prepend HW command header
+    return hdr.pack(MsgType.HW, 1, len(data)) + data
+
+# Print utilities
+
+start_time = time.time()
+def log(msg):
+    print "[{:7.3f}] {:}".format(float(time.time() - start_time), msg)
+
+draw_col = 0
+def draw(c):
+    global draw_col
+    if not DUMP:
+        sys.stdout.write(c)
+        draw_col = (draw_col + 1) % 120
+        if draw_col:
+            sys.stdout.flush()
+        else:
+            sys.stdout.write("\n")
+
+def dump(msg):
+    if DUMP:
+        log(msg)
+
+def receive(sock, length):
+	d = []
+	l = 0
+	while l < length:
+		r = sock.recv(length-l)
+		if not r:
+			return ''
+		d.append(r)
+		l += len(r)
+	return ''.join(d)
+
+# Threads
+
+def readthread(conn, addr):
+	global msgs_in, authenticated
+	while(msgs_in < MSG_QTY):
+		data = receive(conn, hdr.size)
+		if not data:
+			break
+		msg_type, msg_id, msg_len = hdr.unpack(data)
+		#dump("Got {0}, {1}, {2}".format(msg_type, msg_id, msg_len))
+		if msg_type == MsgType.RSP:
+			pass
+		elif msg_type == MsgType.LOGIN:
+			auth = receive(conn, msg_len)
+			log("Auth {0}".format(auth))
+			# Send auth OK and pin modes
+			conn.sendall(hdr.pack(MsgType.RSP, msg_id, MsgStatus.OK))
+			conn.sendall(hw("pm", HW_PIN, "out"))
+			authenticated = True
+		elif msg_type == MsgType.PING:
+			log("Ping")
+			# Send Pong
+			conn.sendall(hdr.pack(MsgType.RSP, msg_id, MsgStatus.OK))
+		elif msg_type == MsgType.HW:
+			data = receive(conn, msg_len)
+			# Print HW messages (just for fun :)
+			draw('v')
+			dump("> " + " ".join(data.split("\0")))
+			msgs_in += 1
+		else:
+			log("Unknown msg type")
+			break
+
+
+def writethread(conn, addr):
+	global msgs_out, authenticated
+	val = 0
+	while (msgs_out < MSG_QTY):
+		if authenticated:
+			conn.sendall(hw("dw", HW_PIN, val))
+			val = 0 if val else 1
+			draw('.')
+			msgs_out += 1
+		time.sleep(SLEEP)
+
+
+# Main code
+
+serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+try:
+    # Set SO_REUSEADDR, this is needed to ignore WAIT state on next run
+    serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    serv.bind((HOST, PORT))
+except socket.error as msg:
+    log('Bind failed. Error Code: {0}, Msg: {1}'.format(str(msg[0]), msg[1]))
+    sys.exit()
+
+serv.listen(1)
+log('Listening on port %d' % PORT)
+
+# Wait for clients
+#while True:
+conn, addr = serv.accept()
+log('Connection from {0}:{1}'.format(addr[0], str(addr[1])))
+if NODELAY != 0:
+	conn.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+if SNDBUF != 0:
+	sndbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF)
+	log('Default SNDBUF %s changed to %s' % (sndbuf, SNDBUF))
+	conn.setsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF, SNDBUF)
+if RCVBUF != 0:
+	rcvbuf = conn.getsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF)
+	log('Default RCVBUF %s changed to %s' % (rcvbuf, RCVBUF))
+	conn.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, RCVBUF)
+
+proc_start = time.time()
+msgs_in = 0
+msgs_out = 0
+authenticated = False
+
+wt = Thread(target=readthread,  args=(conn, addr))
+rt = Thread(target=writethread, args=(conn, addr))
+
+wt.start()
+rt.start()
+
+wt.join()
+#rt.join()
+
+conn.close()
+draw("\n")
+log("Time %3.4f" % (time.time() - proc_start))
+log("Sent {0} messages".format(msgs_out))
+log("Recv {0} messages".format(msgs_in))