初始化提交

arduino-cli/libraries/SevenSegmentTM1637/examples/Basic/Basic.ino

@@ -0,0 +1,57 @@
+/*
+	Basic usage example
+
+	Demonstrated some of the basic functionality of the library. Initialize the display,
+  set the backlight brightness, print some text, count from 0 to 100 and
+  print and blink some text.
+
+  Note: make sure to set your serial monitor to line end: NEW LINE!
+
+	The circuit:
+  * connect TM1637 pin CLK to Arduino pin D4
+  * connect TM1637 pin DIO to Arduino pin D5
+  * connect TM1637 pin Vcc to Arduino pin 5V
+  * connect TM1637 pin GND to Arduino pin GND
+
+	Created 25 September 2015
+	By Bram Harmsen
+
+	https://github.com/bremme/arduino-tm1637
+
+*/
+
+// include the SevenSegmentTM1637 library
+#include "SevenSegmentTM1637.h"
+
+/* initialize global TM1637 Display object
+*  The constructor takes two arguments, the number of the clock pin and the digital output pin:
+* SevenSegmentTM1637(byte pinCLK, byte pinDIO);
+*/
+const byte PIN_CLK = 4;   // define CLK pin (any digital pin)
+const byte PIN_DIO = 5;   // define DIO pin (any digital pin)
+SevenSegmentTM1637    display(PIN_CLK, PIN_DIO);
+
+// run setup code
+void setup() {
+  Serial.begin(9600);         // initializes the Serial connection @ 9600 baud
+  display.begin();            // initializes the display
+  display.setBacklight(100);  // set the brightness to 100 %
+  display.print("INIT");      // display INIT on the display
+  delay(1000);                // wait 1000 ms
+};
+
+// run loop (forever)
+void loop() {
+  display.print("LOOP");                // display LOOP on the display
+  delay(1000);                          // wait 1000 ms
+  display.print("COUNTING SOME DIGITS");// print COUNTING SOME DIGITS
+  display.clear();                      // clear the display
+  for (uint8_t i=0; i < 100; i++) {     // loop from 0 to 100
+    display.print(i);                   // display loop counter
+    delay(100);                         // wait 100 ms
+  };
+  display.clear();                      // clear the display
+  display.print("SUCC");                // print SUCC for success
+  display.blink();                      // blink SUCC
+  delay(1000);                          // wait 1000 ms
+};