初始化提交

arduino-cli/libraries/Rtc_by_Makuna/examples/DS1307_Memory/DS1307_Memory.ino

@@ -0,0 +1,172 @@
+
+// CONNECTIONS:
+// DS1307 SDA --> SDA
+// DS1307 SCL --> SCL
+// DS1307 VCC --> 5v
+// DS1307 GND --> GND
+
+#define countof(a) (sizeof(a) / sizeof(a[0]))
+
+/* for software wire use below
+#include <SoftwareWire.h>  // must be included here so that Arduino library object file references work
+#include <RtcDS1307.h>
+
+SoftwareWire myWire(SDA, SCL);
+RtcDS1307<SoftwareWire> Rtc(myWire);
+ for software wire use above */
+
+/* for normal hardware wire use below */
+#include <Wire.h> // must be included here so that Arduino library object file references work
+#include <RtcDS1307.h>
+RtcDS1307<TwoWire> Rtc(Wire);
+/* for normal hardware wire use above */
+
+
+const char data[] = "what time is it";
+
+void setup () 
+{
+    Serial.begin(57600);
+
+    Serial.print("compiled: ");
+    Serial.print(__DATE__);
+    Serial.println(__TIME__);
+
+    //--------RTC SETUP ------------
+    // if you are using ESP-01 then uncomment the line below to reset the pins to
+    // the available pins for SDA, SCL
+    // Wire.begin(0, 2); // due to limited pins, use pin 0 and 2 for SDA, SCL
+    
+    Rtc.Begin();
+
+    RtcDateTime compiled = RtcDateTime(__DATE__, __TIME__);
+    printDateTime(compiled);
+    Serial.println();
+
+    if (!Rtc.IsDateTimeValid()) 
+    {
+        if (Rtc.LastError() != 0)
+        {
+            // we have a communications error
+            // see https://www.arduino.cc/en/Reference/WireEndTransmission for 
+            // what the number means
+            Serial.print("RTC communications error = ");
+            Serial.println(Rtc.LastError());
+        }
+        else
+        {
+            Serial.println("RTC lost confidence in the DateTime!");
+            Rtc.SetDateTime(compiled);
+        }
+    }
+
+    if (!Rtc.GetIsRunning())
+    {
+        Serial.println("RTC was not actively running, starting now");
+        Rtc.SetIsRunning(true);
+    }
+
+    RtcDateTime now = Rtc.GetDateTime();
+    if (now < compiled) 
+    {
+        Serial.println("RTC is older than compile time!  (Updating DateTime)");
+        Rtc.SetDateTime(compiled);
+    }
+
+    // never assume the Rtc was last configured by you, so
+    // just clear them to your needed state
+    Rtc.SetSquareWavePin(DS1307SquareWaveOut_Low); 
+
+/* comment out on a second run to see that the info is stored long term */
+    // Store something in memory on the RTC
+    Rtc.SetMemory(0, 13);
+    uint8_t written = Rtc.SetMemory(13, (const uint8_t*)data, sizeof(data) - 1); // remove the null terminator strings add
+    Rtc.SetMemory(1, written);
+/* end of comment out section */
+}
+
+void loop () 
+{
+    if (!Rtc.IsDateTimeValid()) 
+    {
+        if (Rtc.LastError() != 0)
+        {
+            // we have a communications error
+            // see https://www.arduino.cc/en/Reference/WireEndTransmission for 
+            // what the number means
+            Serial.print("RTC communications error = ");
+            Serial.println(Rtc.LastError());
+        }
+        else
+        {
+            // Common Causes:
+            //    1) the battery on the device is low or even missing and the power line was disconnected
+            Serial.println("RTC lost confidence in the DateTime!");
+        }
+    }
+
+    RtcDateTime now = Rtc.GetDateTime();
+
+    printDateTime(now);
+    Serial.println();
+
+    delay(5000);
+
+    // read data
+
+    // get the offset we stored our data from address zero
+    uint8_t address = Rtc.GetMemory(0);
+    if (address != 13)
+    {
+        Serial.println("address didn't match");
+    }
+    else
+    {
+        // get the size of the data from address 1
+        uint8_t count = Rtc.GetMemory(1);
+        uint8_t buff[20];
+
+        // get our data from the address with the given size
+        uint8_t gotten = Rtc.GetMemory(address, buff, count);
+
+        if (gotten != count ||
+            count != sizeof(data) - 1) // remove the extra null terminator strings add
+        {
+            Serial.print("something didn't match, count = ");
+            Serial.print(count, DEC);
+            Serial.print(", gotten = ");
+            Serial.print(gotten, DEC);
+            Serial.println();
+        }
+        Serial.print("data read (");
+        Serial.print(gotten);
+        Serial.print(") = \"");
+        for (uint8_t ch = 0; ch < gotten; ch++)
+        {
+            Serial.print((char)buff[ch]);
+        }
+        Serial.println("\"");
+    }
+
+    
+    delay(5000);
+}
+
+
+
+void printDateTime(const RtcDateTime& dt)
+{
+    char datestring[20];
+
+    snprintf_P(datestring, 
+            countof(datestring),
+            PSTR("%02u/%02u/%04u %02u:%02u:%02u"),
+            dt.Month(),
+            dt.Day(),
+            dt.Year(),
+            dt.Hour(),
+            dt.Minute(),
+            dt.Second() );
+    Serial.print(datestring);
+}
+