初始化提交

2024-07-20 22:09:06 +08:00
commit c247dd07a6
6876 changed files with 2743096 additions and 0 deletions
--- a/arduino-cli/libraries/M5Core2-master/examples/Unit/LASER/LASER.ino
+++ b/arduino-cli/libraries/M5Core2-master/examples/Unit/LASER/LASER.ino
@@ -0,0 +1,86 @@
+/*
+*******************************************************************************
+* Copyright (c) 2021 by M5Stack
+*                  Equipped with M5Core sample source code
+*                          配套  M5Core 示例源代码
+* Visit the website for more information: https://docs.m5stack.com/en/core/gray
+* 获取更多资料请访问: https://docs.m5stack.com/zh_CN/core/gray
+*
+* describe: Hall.  霍尔传感器
+* date: 2021/8/18
+*******************************************************************************
+  Please connect to Port B,LASER Unit wireless UART application: burn the program to two M5Cores
+  And connect LASER.TX and LASER.RX
+  Point LASER.TX to LASER.RX and press the button on the panel to send characters to the receiver of LASER.RX.
+  请连接端口B,在屏幕上显示字符串。LASER Unit无线UART应用:刻录程序到两个M5Core并分别连接 LASER RX 和 LASER TX
+  然后按下LASER TX面板上的按钮，将字符发送到LASER.RX接收器。
+*/
+
+#include <M5Core2.h>
+
+char ch;
+#define RX
+void setup() {
+  M5.begin(); //Init M5Core2.  初始化M5Core2
+
+  // Serial2.begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert)
+  Serial2.begin(9600, SERIAL_8N1, 13, 14);
+  pinMode(5, OUTPUT);
+  digitalWrite(5, 1);
+
+  M5.Lcd.setTextSize(4);
+  M5.Lcd.setTextColor(GREEN);
+  M5.Lcd.setCursor(60, 50);
+#ifdef RX
+  M5.Lcd.print("LASER RX");
+#elif defined TX
+  M5.Lcd.print("LASER TX");
+#else
+  M5.Lcd.setCursor(30, 50);
+  M5.Lcd.print("LASER TX/RX");
+  M5.Lcd.setCursor(50, 200);
+  M5.Lcd.print('A');
+  M5.Lcd.setCursor(150, 200);
+  M5.Lcd.print('B');
+  M5.Lcd.setCursor(240, 200);
+  M5.Lcd.print('C');
+#endif
+  M5.Lcd.setCursor(0, 100);
+}
+
+void loop() {
+
+#ifdef RX 
+M5.update();
+ if(Serial2.available()) {
+    char ch = Serial2.read();
+    M5.Lcd.print(ch);
+ }
+
+  if (M5.BtnA.wasReleased()) {
+    M5.Lcd.clear();
+    M5.Lcd.setCursor(0, 0);
+  }
+#elif defined TX
+    Serial2.write('A');
+    delay(50);
+#else
+  if (M5.BtnA.wasReleased()) {
+    ch = 'A';
+    Serial2.write(ch);
+  } else if (M5.BtnB.wasReleased()) {
+    ch = 'B';
+    Serial2.write(ch);
+  } else if (M5.BtnC.wasReleased()) {
+    ch = 'C';
+    Serial2.write(ch);
+  }
+  M5.update();
+ if(Serial2.available()) {
+    char ch = Serial2.read();
+    M5.Lcd.print(ch);
+ }
+#endif
+
+
+}