18069996051/arduino-libs
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

初始化提交

Browse Source
This commit is contained in:
王立帮
2024-07-20 22:09:06 +08:00
commit c247dd07a6
6876 changed files with 2743096 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

286
arduino-cli/libraries/IRremote/examples/UnitTest/PinDefinitionsAndMore.h Normal file
View File

@@ -0,0 +1,286 @@
/*
* PinDefinitionsAndMore.h
*
* Contains pin definitions for IRremote examples for various platforms
* as well as definitions for feedback LED and tone() and includes
*
* Copyright (C) 2021-2022 Armin Joachimsmeyer
* armin.joachimsmeyer@gmail.com
*
* This file is part of IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
*
* Arduino-IRremote is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
*
*/
/*
* Pin mapping table for different platforms
*
* Platform IR input IR output Tone Core/Pin schema
* --------------------------------------------------------------
* DEFAULT/AVR 2 3 4
* ATtinyX5 0|PB0 4|PB4 3|PB3
* ATtiny167 3|PA3 2|PA2 7|PA7 ATTinyCore
* ATtiny167 9|PA3 8|PA2 5|PA7 Digispark pro
* ATtiny3217 18|PA1 19|PA2 20|PA3 MegaTinyCore
* ATtiny1604 2 3|PA5 %
* SAMD21 3 4 5
* ESP8266 14|D5 12|D6 %
* ESP32 15 4 27
* BluePill PA6 PA7 PA3
* APOLLO3 11 12 5
* RP2040 3|GPIO15 4|GPIO16 5|GPIO17
*/
//#define _IR_MEASURE_TIMING // For debugging purposes.
#if defined(ESP8266)
#define FEEDBACK_LED_IS_ACTIVE_LOW // The LED on my board (D4) is active LOW
#define IR_RECEIVE_PIN 14 // D5
#define IR_SEND_PIN 12 // D6 - D4/pin 2 is internal LED
#define _IR_TIMING_TEST_PIN 13 // D7
#define APPLICATION_PIN 0 // D3
#define tone(...) void() // tone() inhibits receive timer
#define noTone(a) void()
#define TONE_PIN 42 // Dummy for examples using it
#elif defined(ESP32)
#include <Arduino.h>
// tone() is included in ESP32 core since 2.0.2
#if !defined(ESP_ARDUINO_VERSION_VAL)
#define ESP_ARDUINO_VERSION_VAL(major, minor, patch) 12345678
#endif
#if ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
#define TONE_LEDC_CHANNEL 1 // Using channel 1 makes tone() independent of receiving timer -> No need to stop receiving timer.
void tone(uint8_t aPinNumber, unsigned int aFrequency){
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
}
void tone(uint8_t aPinNumber, unsigned int aFrequency, unsigned long aDuration){
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
delay(aDuration);
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
}
void noTone(uint8_t aPinNumber){
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
}
#endif // ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
#define IR_RECEIVE_PIN 15 // D15
#define IR_SEND_PIN 4 // D4
#define TONE_PIN 27 // D27 25 & 26 are DAC0 and 1
#define APPLICATION_PIN 16 // RX2 pin
#elif defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) // BluePill
// Timer 3 blocks PA6, PA7, PB0, PB1 for use by Servo or tone()
#define IR_RECEIVE_PIN PA6
#define IR_SEND_PIN PA7
#define TONE_PIN PA3
#define _IR_TIMING_TEST_PIN PA5
#define APPLICATION_PIN PA2
# if defined(ARDUINO_GENERIC_STM32F103C) || defined(ARDUINO_BLUEPILL_F103C8)
// BluePill LED is active low
#define FEEDBACK_LED_IS_ACTIVE_LOW
# endif
#elif defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) // Digispark board
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". saves 370 bytes program memory and 38 bytes RAM for digistump core
#define IR_RECEIVE_PIN 0
#define IR_SEND_PIN 4 // Pin 2 is serial output with ATtinySerialOut. Pin 1 is internal LED and Pin3 is USB+ with pullup on Digispark board.
#define TONE_PIN 3
#define _IR_TIMING_TEST_PIN 3
#elif defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__) // Digispark pro board
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut"
// For ATtiny167 Pins PB6 and PA3 are usable as interrupt source.
# if defined(ARDUINO_AVR_DIGISPARKPRO)
#define IR_RECEIVE_PIN 9 // PA3 - on Digispark board labeled as pin 9
//#define IR_RECEIVE_PIN 14 // PB6 / INT0 is connected to USB+ on DigisparkPro boards
#define IR_SEND_PIN 8 // PA2 - on Digispark board labeled as pin 8
#define TONE_PIN 5 // PA7
#define _IR_TIMING_TEST_PIN 10 // PA4
# else
#define IR_RECEIVE_PIN 3
#define IR_SEND_PIN 2
#define TONE_PIN 7
# endif
#elif defined(__AVR_ATtiny88__) // MH-ET Tiny88 board
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". Saves 128 bytes program memory
// Pin 6 is TX pin 7 is RX
#define IR_RECEIVE_PIN 3 // INT1
#define IR_SEND_PIN 4
#define TONE_PIN 9
#define _IR_TIMING_TEST_PIN 8
#elif defined(__AVR_ATtiny1616__) || defined(__AVR_ATtiny3216__) || defined(__AVR_ATtiny3217__) // Tiny Core Dev board
#define IR_RECEIVE_PIN 18
#define IR_SEND_PIN 19
#define TONE_PIN 20
#define APPLICATION_PIN 0 // PA4
#undef LED_BUILTIN // No LED available on the TinyCore 32 board, take the one on the programming board which is connected to the DAC output
#define LED_BUILTIN 2 // PA6
#elif defined(__AVR_ATtiny1604__)
#define IR_RECEIVE_PIN 2 // To be compatible with interrupt example, pin 2 is chosen here.
#define IR_SEND_PIN 3
#define APPLICATION_PIN 5
#define tone(...) void() // Define as void, since TCB0_INT_vect is also used by tone()
#define noTone(a) void()
#define TONE_PIN 42 // Dummy for examples using it
# elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__) \
|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) \
|| defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) \
|| defined(__AVR_ATmega8515__) || defined(__AVR_ATmega162__)
#define IR_RECEIVE_PIN 2
#define IR_SEND_PIN 13
#define TONE_PIN 4
#define APPLICATION_PIN 5
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 7
#elif defined(ARDUINO_ARCH_APOLLO3) // Sparkfun Apollo boards
#define IR_RECEIVE_PIN 11
#define IR_SEND_PIN 12
#define TONE_PIN 5
#elif defined(ARDUINO_ARCH_MBED) && defined(ARDUINO_ARCH_MBED_NANO) // Arduino Nano 33 BLE
#define IR_RECEIVE_PIN 3 // GPIO15 Start with pin 3 since pin 2|GPIO25 is connected to LED on Pi pico
#define IR_SEND_PIN 4 // GPIO16
#define TONE_PIN 5
#define APPLICATION_PIN 6
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 7 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 8
#elif defined(ARDUINO_ARCH_RP2040) // Arduino Nano Connect, Pi Pico with arduino-pico core https://github.com/earlephilhower/arduino-pico
#define IR_RECEIVE_PIN 15 // to be compatible with the Arduino Nano RP2040 Connect (pin3)
#define IR_SEND_PIN 16
#define TONE_PIN 17
#define APPLICATION_PIN 18
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 19 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 20
// If you program the Nano RP2040 Connect with this core, then you must redefine LED_BUILTIN
// and use the external reset with 1 kOhm to ground to enter UF2 mode
//#undef LED_BUILTIN
//#define LED_BUILTIN 6
#elif defined(PARTICLE) // !!!UNTESTED!!!
#define IR_RECEIVE_PIN A4
#define IR_SEND_PIN A5 // Particle supports multiple pins
#define LED_BUILTIN D7
/*
* 4 times the same (default) layout for easy adaption in the future
*/
#elif defined(TEENSYDUINO)
#define IR_RECEIVE_PIN 2
#define IR_SEND_PIN 3
#define TONE_PIN 4
#define APPLICATION_PIN 5
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 7
#elif defined(__AVR__) // Default as for ATmega328 like on Uno, Nano etc.
#define IR_RECEIVE_PIN 2 // To be compatible with interrupt example, pin 2 is chosen here.
#define IR_SEND_PIN 3
#define TONE_PIN 4
#define APPLICATION_PIN 5
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 7
# if defined(ARDUINO_AVR_PROMICRO) // Sparkfun Pro Micro is __AVR_ATmega32U4__ but has different external circuit
// We have no built in LED at pin 13 -> reuse RX LED
#undef LED_BUILTIN
#define LED_BUILTIN LED_BUILTIN_RX
# endif
#elif defined(ARDUINO_ARCH_MBED) // Arduino Nano 33 BLE
#define IR_RECEIVE_PIN 2
#define IR_SEND_PIN 3
#define TONE_PIN 4
#define APPLICATION_PIN 5
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 7
#elif defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_SAM)
#define IR_RECEIVE_PIN 2
#define IR_SEND_PIN 3
#define TONE_PIN 4
#define APPLICATION_PIN 5
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 7
// On the Zero and others we switch explicitly to SerialUSB
#define Serial SerialUSB
// Definitions for the Chinese SAMD21 M0-Mini clone, which has no led connected to D13/PA17.
// Attention!!! D2 and D4 are swapped on these boards!!!
// If you connect the LED, it is on pin 24/PB11. In this case activate the next two lines.
//#undef LED_BUILTIN
//#define LED_BUILTIN 24 // PB11
// As an alternative you can choose pin 25, it is the RX-LED pin (PB03), but active low.In this case activate the next 3 lines.
//#undef LED_BUILTIN
//#define LED_BUILTIN 25 // PB03
//#define FEEDBACK_LED_IS_ACTIVE_LOW // The RX LED on the M0-Mini is active LOW
#elif defined (NRF51) // BBC micro:bit
#define IR_RECEIVE_PIN 2
#define IR_SEND_PIN 3
#define APPLICATION_PIN 1
#define _IR_TIMING_TEST_PIN 4
#define tone(...) void() // no tone() available
#define noTone(a) void()
#define TONE_PIN 42 // Dummy for examples using it
#else
#warning Board / CPU is not detected using pre-processor symbols -> using default values, which may not fit. Please extend PinDefinitionsAndMore.h.
// Default valued for unidentified boards
#define IR_RECEIVE_PIN 2
#define IR_SEND_PIN 3
#define TONE_PIN 4
#define APPLICATION_PIN 5
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
#define _IR_TIMING_TEST_PIN 7
#endif // defined(ESP8266)
#if defined(ESP32) || defined(ARDUINO_ARCH_RP2040) || defined(PARTICLE) || defined(ARDUINO_ARCH_MBED)
#define SEND_PWM_BY_TIMER // We do not have pin restrictions for this CPU's, so lets use the hardware PWM for send carrier signal generation
#else
# if defined(SEND_PWM_BY_TIMER)
#undef IR_SEND_PIN // SendPin is determined by timer! This avoids warning in IRTimer.hpp
# endif
#endif
#if !defined (FLASHEND)
#define FLASHEND 0xFFFF // Dummy value for platforms where FLASHEND is not defined
#endif
/*
* Helper macro for getting a macro definition as string
*/
#if !defined(STR_HELPER)
#define STR_HELPER(x) #x
#define STR(x) STR_HELPER(x)
#endif

429
arduino-cli/libraries/IRremote/examples/UnitTest/UnitTest.ino Normal file
View File

@@ -0,0 +1,429 @@
/*
* UnitTest.cpp
*
* Demonstrates sending IR codes in standard format with address and command and
* simultaneously receiving. Both values are checked for consistency.
*
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
*
************************************************************************************
* MIT License
*
* Copyright (c) 2020-2022 Armin Joachimsmeyer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is furnished
* to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
************************************************************************************
*/
#include <Arduino.h>
//#define RAW_BUFFER_LENGTH 750 // 750 is the value for air condition remotes.
//#define EXCLUDE_UNIVERSAL_PROTOCOLS // Saves up to 1000 bytes program memory.
//#define EXCLUDE_EXOTIC_PROTOCOLS
//#define SEND_PWM_BY_TIMER
//#define USE_NO_SEND_PWM
#define NO_LED_FEEDBACK_CODE // saves 500 bytes program memory
#define MARK_EXCESS_MICROS 10 // Adapt it to your IR receiver module. See also IRremote.h.
//#define TRACE // For internal usage
//#define DEBUG // Activate this for lots of lovely debug output from the decoders.
#if FLASHEND >= 0x1FFF // For 8k flash or more, like ATtiny85
#define DECODE_DENON // Includes Sharp
#define DECODE_KASEIKYO
#define DECODE_NEC // Includes Apple and Onkyo
#endif
#if FLASHEND >= 0x3FFF // For 16k flash or more, like ATtiny1604
#define DECODE_JVC
#define DECODE_RC5
#define DECODE_RC6
#define DECODE_SONY
#define DECODE_PANASONIC // the same as DECODE_KASEIKYO
#define DECODE_DISTANCE // universal decoder for pulse distance protocols
#define DECODE_HASH // special decoder for all protocols
#endif
#if FLASHEND >= 0x7FFF // For 32k flash or more, like ATmega328
#define DECODE_SAMSUNG
#define DECODE_LG
#define DECODE_BOSEWAVE
#define DECODE_LEGO_PF
#define DECODE_MAGIQUEST
#define DECODE_WHYNTER
#endif
#include "PinDefinitionsAndMore.h" //Define macros for input and output pin etc.
#include <IRremote.hpp>
#if defined(APPLICATION_PIN)
#define DEBUG_BUTTON_PIN APPLICATION_PIN // if held low, print timing for each received data
#else
#define DEBUG_BUTTON_PIN 6
#endif
#define DELAY_AFTER_SEND 1000
#define DELAY_AFTER_LOOP 5000
#if defined(SEND_PWM_BY_TIMER) && !defined(SEND_PWM_DOES_NOT_USE_RECEIVE_TIMER)
#error Unit test cannot run if SEND_PWM_BY_TIMER is enabled i.e. receive timer us also used by send
#endif
void setup() {
pinMode(DEBUG_BUTTON_PIN, INPUT_PULLUP);
Serial.begin(115200);
#if defined(__AVR_ATmega32U4__) || defined(SERIAL_PORT_USBVIRTUAL) || defined(SERIAL_USB) /*stm32duino*/|| defined(USBCON) /*STM32_stm32*/|| defined(SERIALUSB_PID) || defined(ARDUINO_attiny3217)
delay(4000); // To be able to connect Serial monitor after reset or power up and before first print out. Do not wait for an attached Serial Monitor!
#endif
// Just to know which program is running on my Arduino
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
// Start the receiver and if not 3. parameter specified, take LED_BUILTIN pin from the internal boards definition as default feedback LED
IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK);
IrSender.begin(IR_SEND_PIN, ENABLE_LED_FEEDBACK); // Specify send pin and enable feedback LED at default feedback LED pin
Serial.print(F("Ready to receive IR signals of protocols: "));
printActiveIRProtocols(&Serial);
Serial.println(F("at pin " STR(IR_RECEIVE_PIN)));
Serial.println(F("Ready to send IR signals at pin " STR(IR_SEND_PIN)));
#if FLASHEND >= 0x3FFF // For 16k flash or more, like ATtiny1604
// For esp32 we use PWM generation by ledcWrite() for each pin.
# if !defined(SEND_PWM_BY_TIMER)
/*
* Print internal software PWM generation info
*/
IrSender.enableIROut(38); // Call it with 38 kHz to initialize the values printed below
Serial.print(F("Send signal mark duration for 38kHz is "));
Serial.print(IrSender.periodOnTimeMicros);
Serial.print(F(" us, pulse correction is "));
Serial.print(IrSender.getPulseCorrectionNanos());
Serial.print(F(" ns, total period is "));
Serial.print(IrSender.periodTimeMicros);
Serial.println(F(" us"));
# endif
// infos for receive
Serial.print(RECORD_GAP_MICROS);
Serial.println(F(" us is the (minimum) gap, after which the start of a new IR packet is assumed"));
Serial.print(MARK_EXCESS_MICROS);
Serial.println(F(" us are subtracted from all marks and added to all spaces for decoding"));
#endif
}
void checkReceive(uint16_t aSentAddress, uint16_t aSentCommand) {
// wait until signal has received
delay((RECORD_GAP_MICROS / 1000) + 1);
if (IrReceiver.decode()) {
// Print a short summary of received data
#if FLASHEND >= 0x3FFF // For 16k flash or more, like ATtiny1604
IrReceiver.printIRResultShort(&Serial);
#else
IrReceiver.printIRResultMinimal(&Serial);
#endif
if (IrReceiver.decodedIRData.flags & IRDATA_FLAGS_WAS_OVERFLOW) {
IrReceiver.decodedIRData.flags = false; // yes we have recognized the flag :-)
Serial.println(F("Overflow detected"));
Serial.println(F("Try to increase the \"RAW_BUFFER_LENGTH\" value of " STR(RAW_BUFFER_LENGTH) " in " __FILE__));
// see also https://github.com/Arduino-IRremote/Arduino-IRremote#modifying-compile-options-with-sloeber-ide } else {
#if FLASHEND >= 0x3FFF // For 16k flash or more, like ATtiny1604
} else if (IrReceiver.decodedIRData.protocol == UNKNOWN || digitalRead(DEBUG_BUTTON_PIN) == LOW) {
// We have an unknown protocol, print more info
IrReceiver.printIRResultRawFormatted(&Serial, true);
#endif
} else {
/*
* Check address
*/
if (IrReceiver.decodedIRData.address != aSentAddress) {
Serial.print(F("ERROR: Received address=0x"));
Serial.print(IrReceiver.decodedIRData.address, HEX);
Serial.print(F(" != sent address=0x"));
Serial.println(aSentAddress, HEX);
}
/*
* Check command
*/
if (IrReceiver.decodedIRData.command != aSentCommand) {
Serial.print(F("ERROR: Received command=0x"));
Serial.print(IrReceiver.decodedIRData.command, HEX);
Serial.print(F(" != sent command=0x"));
Serial.println(aSentCommand, HEX);
}
}
IrReceiver.resume();
} else {
Serial.println(F("No data received"));
}
Serial.println();
}
/*
* Set up the data to be sent.
* For most protocols, the data is build up with a constant 8 (or 16 byte) address
* and a variable 8 bit command.
* There are exceptions like Sony and Denon, which have 5 bit address.
*/
uint16_t sAddress = 0xFFF1;
uint8_t sCommand = 0x76;
#define sRepeats 0 // no unit test for repeats
void loop() {
/*
* Print values
*/
Serial.println();
Serial.print(F("address=0x"));
Serial.print(sAddress, HEX);
Serial.print(F(" command=0x"));
Serial.print(sCommand, HEX);
Serial.println();
Serial.println();
Serial.println(F("Send NEC with 8 bit address"));
Serial.flush();
IrSender.sendNEC(sAddress & 0xFF, sCommand, sRepeats);
checkReceive(sAddress & 0xFF, sCommand);
delay(DELAY_AFTER_SEND); // delay must be greater than 5 ms (RECORD_GAP_MICROS), otherwise the receiver sees it as one long signal
Serial.println(F("Send NEC with 16 bit address"));
Serial.flush();
IrSender.sendNEC(sAddress, sCommand, sRepeats);
checkReceive(sAddress, sCommand);
delay(DELAY_AFTER_SEND);
#if FLASHEND >= 0x3FFF // For 16k flash or more, like ATtiny1604. Code does not fit in program memory of ATtiny85 etc.
if (sAddress == 0xFFF1) {
/*
* Send constant values only once in this demo
*/
Serial.println(F("Sending NEC Pronto data with 8 bit address 0x80 and command 0x45 and no repeats"));
Serial.flush();
IrSender.sendPronto(F("0000 006D 0022 0000 015E 00AB " /* Pronto header + start bit */
"0017 0015 0017 0015 0017 0017 0015 0017 0017 0015 0017 0015 0017 0015 0017 003F " /* Lower address byte */
"0017 003F 0017 003E 0017 003F 0015 003F 0017 003E 0017 003F 0017 003E 0017 0015 " /* Upper address byte (inverted at 8 bit mode) */
"0017 003E 0017 0015 0017 003F 0017 0015 0017 0015 0017 0015 0017 003F 0017 0015 " /* command byte */
"0019 0013 0019 003C 0017 0015 0017 003F 0017 003E 0017 003F 0017 0015 0017 003E " /* inverted command byte */
"0017 0806"), 0); //stop bit, no repeat possible, because of missing repeat pattern
checkReceive(0x80, 0x45);
delay(DELAY_AFTER_SEND);
# if FLASHEND >= 0x7FFF // For 32k flash or more, like UNO. Code does not fit in program memory of ATtiny1604 etc.
Serial.println(F("Send NEC 16 bit address=0xFB04 and command 0x08 with exact timing (16 bit array format)"));
Serial.flush();
const uint16_t irSignal[] = { 9000, 4500/*Start bit*/, 560, 560, 560, 560, 560, 1690, 560,
560/*0010 0x4 of 16 bit address LSB first*/, 560, 560, 560, 560, 560, 560, 560, 560/*0000*/, 560, 1690, 560, 1690,
560, 560, 560, 1690/*1101 0xB*/, 560, 1690, 560, 1690, 560, 1690, 560, 1690/*1111*/, 560, 560, 560, 560, 560, 560,
560, 1690/*0001 0x08 of command LSB first*/, 560, 560, 560, 560, 560, 560, 560, 560/*0000 0x00*/, 560, 1690, 560,
1690, 560, 1690, 560, 560/*1110 Inverted 8 of command*/, 560, 1690, 560, 1690, 560, 1690, 560,
1690/*1111 inverted 0 of command*/, 560 /*stop bit*/}; // Using exact NEC timing
IrSender.sendRaw(irSignal, sizeof(irSignal) / sizeof(irSignal[0]), NEC_KHZ); // Note the approach used to automatically calculate the size of the array.
checkReceive(0xFB04 & 0xFF, 0x08);
delay(DELAY_AFTER_SEND);
# endif
/*
* With sendNECRaw() you can send 32 bit combined codes
*/
Serial.println(F("Send NEC / ONKYO with 16 bit address 0x0102 and 16 bit command 0x0304 with NECRaw(0x03040102)"));
Serial.flush();
IrSender.sendNECRaw(0x03040102, sRepeats);
checkReceive(0x0102, 0x304);
delay(DELAY_AFTER_SEND);
/*
* With Send sendNECMSB() you can send your old 32 bit codes.
* To convert one into the other, you must reverse the byte positions and then reverse all positions of each byte.
* Example:
* 0xCB340102 byte reverse -> 0x020134CB bit reverse-> 40802CD3
*/
Serial.println(F("Send NEC with 16 bit address 0x0102 and command 0x34 with old 32 bit format MSB first"));
Serial.flush();
IrSender.sendNECMSB(0x40802CD3, 32, false);
checkReceive(0x0102, 0x34);
delay(DELAY_AFTER_SEND);
}
#endif
Serial.println(F("Send Onkyo (NEC with 16 bit command)"));
Serial.flush();
IrSender.sendOnkyo(sAddress, sCommand << 8 | sCommand, sRepeats);
checkReceive(sAddress, sCommand << 8 | sCommand);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Apple"));
Serial.flush();
IrSender.sendApple(sAddress & 0xFF, sCommand, sRepeats);
checkReceive(sAddress & 0xFF, sCommand);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Panasonic"));
Serial.flush();
IrSender.sendPanasonic(sAddress & 0xFFF, sCommand, sRepeats);
checkReceive(sAddress & 0xFFF, sCommand);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Kaseikyo with 0x4711 as Vendor ID"));
Serial.flush();
IrSender.sendKaseikyo(sAddress & 0xFFF, sCommand, sRepeats, 0x4711);
checkReceive(sAddress & 0xFFF, sCommand);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Kaseikyo_Denon variant"));
Serial.flush();
IrSender.sendKaseikyo_Denon(sAddress & 0xFFF, sCommand, sRepeats);
checkReceive(sAddress & 0xFFF, sCommand);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Denon"));
Serial.flush();
IrSender.sendDenon(sAddress & 0x1F, sCommand, sRepeats);
checkReceive(sAddress & 0x1F, sCommand);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Denon/Sharp variant"));
Serial.flush();
IrSender.sendSharp(sAddress & 0x1F, sCommand, sRepeats);
checkReceive(sAddress & 0x1F, sCommand);
delay(DELAY_AFTER_SEND);
#if FLASHEND >= 0x3FFF // For 16k flash or more, like ATtiny1604
Serial.println(F("Send Sony/SIRCS with 7 command and 5 address bits"));
Serial.flush();
IrSender.sendSony(sAddress & 0x1F, sCommand & 0x7F, sRepeats);
checkReceive(sAddress & 0x1F, sCommand & 0x7F);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Sony/SIRCS with 7 command and 8 address bits"));
Serial.flush();
IrSender.sendSony(sAddress & 0xFF, sCommand, sRepeats, SIRCS_15_PROTOCOL);
checkReceive(sAddress & 0xFF, sCommand & 0x7F);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send Sony/SIRCS with 7 command and 13 address bits"));
Serial.flush();
IrSender.sendSony(sAddress & 0x1FFF, sCommand & 0x7F, sRepeats, SIRCS_20_PROTOCOL);
checkReceive(sAddress & 0x1FFF, sCommand & 0x7F);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send RC5"));
Serial.flush();
IrSender.sendRC5(sAddress & 0x1F, sCommand & 0x3F, sRepeats, true); // 5 address, 6 command bits
checkReceive(sAddress & 0x1F, sCommand & 0x3F);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send RC5X with 7.th MSB of command set"));
Serial.flush();
IrSender.sendRC5(sAddress & 0x1F, (sCommand & 0x3F) + 0x40, sRepeats, true); // 5 address, 7 command bits
checkReceive(sAddress & 0x1F, (sCommand & 0x3F) + 0x40);
delay(DELAY_AFTER_SEND);
Serial.println(F("Send RC6"));
// RC6 check does not work stable without the flush
Serial.flush();
IrSender.sendRC6(sAddress & 0xFF, sCommand, sRepeats, true);
checkReceive(sAddress & 0xFF, sCommand);
delay(DELAY_AFTER_SEND);
/*
* Next example how to use the IrSender.write function
*/
IRData IRSendData;
// prepare data
IRSendData.address = sAddress;
IRSendData.command = sCommand;
IRSendData.flags = IRDATA_FLAGS_EMPTY;
IRSendData.protocol = SAMSUNG;
Serial.print(F("Send "));
Serial.println(getProtocolString(IRSendData.protocol));
Serial.flush();
IrSender.write(&IRSendData, sRepeats);
checkReceive(IRSendData.address, IRSendData.command);
delay(DELAY_AFTER_SEND);
IRSendData.protocol = JVC; // switch protocol
Serial.print(F("Send "));
Serial.println(getProtocolString(IRSendData.protocol));
Serial.flush();
IrSender.write(&IRSendData, sRepeats);
checkReceive(IRSendData.address & 0xFF, IRSendData.command);
delay(DELAY_AFTER_SEND);
IRSendData.protocol = LG;
IRSendData.command = sCommand << 8 | sCommand; // LG supports 16 bit command
Serial.print(F("Send "));
Serial.println(getProtocolString(IRSendData.protocol));
Serial.flush();
IrSender.write(&IRSendData, sRepeats);
checkReceive(IRSendData.address & 0xFF, IRSendData.command);
delay(DELAY_AFTER_SEND);
#endif // FLASHEND >= 0x3FFF
#if FLASHEND >= 0x7FFF // For 32k flash or more, like ATmega328
IRSendData.protocol = BOSEWAVE;
Serial.println(F("Send Bosewave with no address and 8 command bits"));
Serial.flush();
IrSender.write(&IRSendData, sRepeats);
checkReceive(0, IRSendData.command & 0xFF);
delay(DELAY_AFTER_SEND);
#endif // FLASHEND >= 0x7FFF
/*
* LEGO is difficult to receive because of its short marks and spaces
*/
// Serial.println(F("Send Lego with 2 channel and with 4 command bits"));
// Serial.flush();
// IrSender.sendLegoPowerFunctions(sAddress, sCommand, LEGO_MODE_COMBO, true);
// checkReceive(sAddress, sCommand); // never has success for Lego protocol :-(
// delay(DELAY_AFTER_SEND);
/*
* Force buffer overflow
*/
Serial.println(F("Force buffer overflow by sending 280 marks and spaces"));
for (unsigned int i = 0; i < 140; ++i) {
// 400 + 400 should be received as 8/8 and sometimes as 9/7 or 7/9 if compensation by MARK_EXCESS_MICROS is optimal.
// 210 + 540 = 750 should be received as 5/10 or 4/11 if compensation by MARK_EXCESS_MICROS is optimal.
IrSender.mark(210); // 8 pulses at 38 kHz
IrSender.space(540); // to fill up to 750 us
}
checkReceive(sAddress, sCommand);
delay(DELAY_AFTER_SEND);
/*
* Increment values
* Also increment address just for demonstration, which normally makes no sense
*/
sAddress += 0x0101;
sCommand += 0x11;
delay(DELAY_AFTER_LOOP); // additional delay at the end of each loop
}

98
arduino-cli/libraries/IRremote/examples/UnitTest/UnitTest.log Normal file
View File

@@ -0,0 +1,98 @@
START ../src/UnitTest.cpp from Jan 27 2022
Using library version 3.6.0
Ready to receive IR signals of protocols: NEC, Panasonic/Kaseikyo, Denon/Sharp, Sony, RC5, RC6, LG, JVC, Samsung, Whynter, Lego Power Functions, Bosewave , MagiQuest, Universal Distance, Hash at pin 3
Send signal mark duration for 38kHz is 8 us, pulse correction is 3000 ns, total period is 26 us
5000 us is the (minimum) gap, after which the start of a new IR packet is assumed
10 us are subtracted from all marks and added to all spaces for decoding
address=0xFFF1 command=0x76
Send NEC with 8 bit address
Protocol=NEC Address=0xF1 Command=0x76 Raw-Data=0x89760EF1 32 bits LSB first
Send NEC with 16 bit address
Protocol=NEC Address=0xFFF1 Command=0x76 Raw-Data=0x8976FFF1 32 bits LSB first
Sending NEC Pronto data with 8 bit address 0x80 and command 0x45 and no repeats
Protocol=NEC Address=0x80 Command=0x45 Raw-Data=0xBA457F80 32 bits LSB first
Send NEC 16 bit address=0xFB04 and command 0x08 with exact timing (16 bit array format)
Protocol=NEC Address=0x4 Command=0x8 Raw-Data=0xF708FB04 32 bits LSB first
Send NEC / ONKYO with 16 bit address 0x0102 and 16 bit command 0x0304 with NECRaw(0x03040102)
Protocol=ONKYO Address=0x102 Command=0x304 Raw-Data=0x3040102 32 bits LSB first
Send NEC with 16 bit address 0x0102 and command 0x34 with old 32 bit format MSB first
Protocol=NEC Address=0x102 Command=0x34 Raw-Data=0xCB340102 32 bits LSB first
Send Onkyo (NEC with 16 bit command)
Protocol=ONKYO Address=0xFFF1 Command=0x7676 Raw-Data=0x7676FFF1 32 bits LSB first
Send Apple
Protocol=APPLE Address=0xF1 Command=0x76 Raw-Data=0xF17687EE 32 bits LSB first
Send Panasonic
Protocol=PANASONIC Address=0xFF1 Command=0x76 Extra=0x2002 Raw-Data=0x9976FF10 48 bits LSB first
Send Kaseikyo with 0x4711 as Vendor ID
Protocol=KASEIKYO Address=0xFF1 Command=0x76 Raw-Data=0x9A76FF13 48 bits LSB first
Send Kaseikyo_Denon variant
Protocol=KASEIKYO_DENON Address=0xFF1 Command=0x76 Extra=0x3256 Raw-Data=0x9976FF10 48 bits LSB first
Send Denon
Protocol=DENON Address=0x11 Command=0x76 Raw-Data=0x45D8 15 bits MSB first
Send Denon/Sharp variant
Protocol=SHARP Address=0x11 Command=0x76 Raw-Data=0x45DA 15 bits MSB first
Send Sony/SIRCS with 7 command and 5 address bits
Protocol=SONY Address=0x11 Command=0x76 Raw-Data=0x8F6 12 bits LSB first
Send Sony/SIRCS with 7 command and 8 address bits
Protocol=SONY Address=0xF1 Command=0x76 Raw-Data=0x78F6 15 bits LSB first
Send Sony/SIRCS with 7 command and 13 address bits
Protocol=SONY Address=0x1FF1 Command=0x76 Raw-Data=0xFF8F6 20 bits LSB first
Send RC5
Protocol=RC5 Address=0x11 Command=0x36 Toggle=1 Raw-Data=0x1C76 13 bits MSB first
Send RC5X with 7.th MSB of command set
Protocol=RC5 Address=0x11 Command=0x76 Raw-Data=0x476 13 bits MSB first
Send RC6
Protocol=RC6 Address=0xF1 Command=0x76 Toggle=1 Raw-Data=0x1F176 20 bits MSB first
Send SAMSUNG
Protocol=SAMSUNG Address=0xFFF1 Command=0x76 Raw-Data=0x8976FFF1 32 bits LSB first
Send JVC
Protocol=JVC Address=0xF1 Command=0x76 Raw-Data=0x76F1 16 bits LSB first
Send LG
Protocol=LG Address=0xF1 Command=0x7676 Raw-Data=0xF17676A 28 bits MSB first
Send Bosewave with no address and 8 command bits
Protocol=BOSEWAVE Address=0x0 Command=0x76 Raw-Data=0x8976 16 bits LSB first
Force buffer overflow by sending 280 marks and spaces
Protocol=UNKNOWN Hash=0x0 0 bits (incl. gap and start) received
Overflow detected
Try to increase the "RAW_BUFFER_LENGTH" value of 112 in ../src/UnitTest.cpp
address=0xF2 command=0x87
Send NEC with 8 bit address
Protocol=NEC Address=0xF2 Command=0x87 Raw-Data=0x78870DF2 32 bits LSB first
Send NEC with 16 bit address
Protocol=NEC Address=0xF2 Command=0x87 Raw-Data=0x78870DF2 32 bits LSB first
Send Onkyo (NEC with 16 bit command)
Protocol=ONKYO Address=0xF2 Command=0x8787 Raw-Data=0x878700F2 32 bits LSB first
Send Apple
Protocol=APPLE Address=0xF2 Command=0x87 Raw-Data=0xF28787EE 32 bits LSB first