初始化提交

arduino-cli/libraries/Blynk/examples/Boards_WiFi/TheAirBoard_WiFly/TheAirBoard_WiFly.ino

@@ -0,0 +1,81 @@
+/*************************************************************
+  Download latest Blynk library here:
+    https://github.com/blynkkk/blynk-library/releases/latest
+
+  Blynk is a platform with iOS and Android apps to control
+  Arduino, Raspberry Pi and the likes over the Internet.
+  You can easily build graphic interfaces for all your
+  projects by simply dragging and dropping widgets.
+
+    Downloads, docs, tutorials: http://www.blynk.cc
+    Sketch generator:           http://examples.blynk.cc
+    Blynk community:            http://community.blynk.cc
+    Follow us:                  http://www.fb.com/blynkapp
+                                http://twitter.com/blynk_app
+
+  Blynk library is licensed under MIT license
+  This example code is in public domain.
+
+ *************************************************************
+  This example shows how to use AirBoard + RN-XV WiFly module
+  to connect your project to Blynk.
+
+  For this example you need WiFlyHQ library:
+    https://github.com/harlequin-tech/WiFlyHQ
+
+  Note: Be sure to read this: http://www.theairboard.cc/quick-start/
+        WiFly firmware version 4.41 or later is preferred.
+
+  Change WiFi ssid, pass, and Blynk auth token to run :)
+  Feel free to apply it to any other example. It's simple!
+ *************************************************************/
+
+#include <SoftwareSerial.h>
+SoftwareSerial DebugSerial(10, 11); // RX, TX
+
+/* Comment this out to disable prints and save space */
+#define BLYNK_PRINT DebugSerial
+
+
+#include <TheAirBoard.h>
+#include <WiFlyHQ.h>
+#include <BlynkSimpleWiFly.h>
+
+// You should get Auth Token in the Blynk App.
+// Go to the Project Settings (nut icon).
+char auth[] = "YourAuthToken";
+
+// Your WiFi credentials.
+// Set password to "" for open networks.
+char ssid[] = "YourNetworkName";
+char pass[] = "YourPassword";
+
+#define WiFlySerial Serial
+WiFly wifly;
+
+void setup()
+{
+  // Debug console
+  DebugSerial.begin(9600);
+
+  delay(10);
+  WiFlySerial.begin(9600);  // Set your RN-XV baud rate
+  delay(10);
+
+  // Bind WiFly driver to the serial
+  if (!wifly.begin(&WiFlySerial)) {
+    BLYNK_FATAL("Failed to start wifly");
+  }
+
+  // You can try increasing baud rate:
+  //wifly.setBaud(115200);
+  //WiFlySerial.begin(115200);
+
+  Blynk.begin(auth, wifly, ssid, pass);
+}
+
+void loop()
+{
+  Blynk.run();
+}
+