初始化提交

arduino-cli/libraries/Blynk/examples/Boards_GSM/TinyGSM_MKR1400/TinyGSM_MKR1400.ino

@@ -0,0 +1,90 @@
+/*************************************************************
+  Download latest Blynk library here:
+    https://github.com/blynkkk/blynk-library/releases/latest
+
+  Blynk is a platform with iOS and Android apps to control
+  Arduino, Raspberry Pi and the likes over the Internet.
+  You can easily build graphic interfaces for all your
+  projects by simply dragging and dropping widgets.
+
+    Downloads, docs, tutorials: http://www.blynk.cc
+    Sketch generator:           http://examples.blynk.cc
+    Blynk community:            http://community.blynk.cc
+    Follow us:                  http://www.fb.com/blynkapp
+                                http://twitter.com/blynk_app
+
+  Blynk library is licensed under MIT license
+  This example code is in public domain.
+
+ *************************************************************
+  Attention! Please check out TinyGSM guide:
+    https://tiny.cc/tinygsm-readme
+
+  Change GPRS apm, user, pass, and Blynk auth token to run :)
+  Feel free to apply it to any other example. It's simple!
+
+ *************************************************************/
+
+/* Comment this out to disable prints and save space */
+#define BLYNK_PRINT Serial
+
+// Arduino MKR GSM 1400 uses U-blox modem
+#define TINY_GSM_MODEM_UBLOX
+
+// Default heartbeat interval for GSM is 60
+// If you want override this value, uncomment and set this option:
+//#define BLYNK_HEARTBEAT 30
+
+#include <TinyGsmClient.h>
+#include <BlynkSimpleTinyGSM.h>
+
+// You should get Auth Token in the Blynk App.
+// Go to the Project Settings (nut icon).
+char auth[] = "YourAuthToken";
+
+// Your GPRS credentials
+// Leave empty, if missing user or pass
+char apn[]  = "YourAPN";
+char user[] = "";
+char pass[] = "";
+
+TinyGsm modem(SerialGSM);
+
+void setup()
+{
+  // Debug console
+  Serial.begin(9600);
+
+  delay(10);
+
+  // Set GSM module baud rate
+  SerialGSM.begin(115200);
+
+  pinMode(GSM_DTR, OUTPUT);
+  digitalWrite(GSM_DTR, LOW);
+  delay(5);
+
+  // Turn on the GSM module by triggering GSM_RESETN pin
+  pinMode(GSM_RESETN, OUTPUT);
+  digitalWrite(GSM_RESETN, HIGH);
+  delay(100);
+  digitalWrite(GSM_RESETN, LOW);
+
+  delay(1000);
+
+  // Restart takes quite some time
+  // To skip it, call init() instead of restart()
+  Serial.println("Initializing modem...");
+  modem.restart();
+
+  // Unlock your SIM card with a PIN
+  //modem.simUnlock("1234");
+
+  Blynk.begin(auth, modem, apn, user, pass);
+}
+
+void loop()
+{
+  Blynk.run();
+}
+