初始化提交

arduino-cli/libraries/Blynk/examples/Boards_Ethernet/Arduino_MKR_ETH/Arduino_MKR_ETH.ino

@@ -0,0 +1,69 @@
+/*************************************************************
+  Download latest Blynk library here:
+    https://github.com/blynkkk/blynk-library/releases/latest
+
+  Blynk is a platform with iOS and Android apps to control
+  Arduino, Raspberry Pi and the likes over the Internet.
+  You can easily build graphic interfaces for all your
+  projects by simply dragging and dropping widgets.
+
+    Downloads, docs, tutorials: http://www.blynk.cc
+    Sketch generator:           http://examples.blynk.cc
+    Blynk community:            http://community.blynk.cc
+    Social networks:            http://www.fb.com/blynkapp
+                                http://twitter.com/blynk_app
+
+  Blynk library is licensed under MIT license
+  This example code is in public domain.
+
+ *************************************************************
+  This example shows how to use Arduino MKR ETH shield
+  to connect your project to Blynk.
+
+  Note: This requires the latest Ethernet library (2.0.0+)
+    from http://librarymanager/all#Ethernet
+
+  WARNING: If you have an SD card, you may need to disable it
+        by setting pin 4 to HIGH. Read more here:
+        https://www.arduino.cc/en/Main/ArduinoEthernetShield
+
+  Feel free to apply it to any other example. It's simple!
+ *************************************************************/
+
+/* Comment this out to disable prints and save space */
+#define BLYNK_PRINT Serial
+
+
+#include <SPI.h>
+#include <Ethernet.h>
+#include <BlynkSimpleEthernet.h>
+
+// You should get Auth Token in the Blynk App.
+// Go to the Project Settings (nut icon).
+char auth[] = "YourAuthToken";
+
+#define MKRETH_CS  5
+#define SDCARD_CS  4
+
+void setup()
+{
+  // Debug console
+  Serial.begin(9600);
+
+  pinMode(SDCARD_CS, OUTPUT);
+  digitalWrite(SDCARD_CS, HIGH); // Deselect the SD card
+
+  Ethernet.init(MKRETH_CS);      // Init MKR ETH shield
+
+  Blynk.begin(auth);
+  // You can also specify server:
+  //Blynk.begin(auth, "blynk-cloud.com", 80);
+  //Blynk.begin(auth, IPAddress(192,168,1,100), 8080);
+  // For more options, see Boards_Ethernet/Arduino_Ethernet_Manual example
+}
+
+void loop()
+{
+  Blynk.run();
+}
+