初始化提交

2024-07-20 22:09:06 +08:00
commit c247dd07a6
6876 changed files with 2743096 additions and 0 deletions
--- a/arduino-cli/libraries/Blynk/examples/Blynk.Inject/Template_ESP32/Settings.h
+++ b/arduino-cli/libraries/Blynk/examples/Blynk.Inject/Template_ESP32/Settings.h
@@ -0,0 +1,81 @@
+/*
+ * General options
+ */
+
+#define BOARD_FIRMWARE_VERSION        "1.0.1"
+#define BOARD_HARDWARE_VERSION        "1.0.0"
+
+#define BOARD_NAME                    "Product Name"        // Name of your product. Should match App Export request info.
+#define BOARD_VENDOR                  "Company Name"        // Name of your company. Should match App Export request info.
+#define BOARD_TEMPLATE_ID             "TMPL0000"            // ID of the Tile Template. Can be found in Tile Template Settings
+
+#define PRODUCT_WIFI_SSID             "Our Product"         // Name of the device, to be displayed during configuration. Should match export request info.
+#define BOARD_CONFIG_AP_URL           "our-product.cc"      // Config page will be available in a browser at 'http://our-product.cc/'
+
+/*
+ * Board configuration (see examples below).
+ */
+
+#if defined(USE_CUSTOM_BOARD)
+
+  // Custom board configuration
+  #define BOARD_BUTTON_PIN            0                     // Pin where user button is attached
+  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"
+
+  #define BOARD_LED_PIN               13                    // Set LED pin - if you have a single-color LED attached
+  //#define BOARD_LED_PIN_R           27                    // Set R,G,B pins - if your LED is PWM RGB 
+  //#define BOARD_LED_PIN_G           26
+  //#define BOARD_LED_PIN_B           25
+  //#define BOARD_LED_PIN_WS2812      33                    // Set if your LED is WS2812 RGB
+  #define BOARD_LED_INVERSE           false                 // true if LED is common anode, false if common cathode
+  #define BOARD_LED_BRIGHTNESS        64                    // 0..255 brightness control
+
+#elif defined(USE_WROVER_BOARD)
+
+  // Custom board configuration
+  #define BOARD_BUTTON_PIN            15                    // Pin where user button is attached
+  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"
+
+  #define BOARD_LED_PIN_R             0                     // Set R,G,B pins - if your LED is PWM RGB 
+  #define BOARD_LED_PIN_G             2
+  #define BOARD_LED_PIN_B             4
+  #define BOARD_LED_INVERSE           false                 // true if LED is common anode, false if common cathode
+  #define BOARD_LED_BRIGHTNESS        64                    // 0..255 brightness control
+
+#else
+  #error "No board selected"
+#endif
+
+
+/*
+ * Advanced options
+ */
+
+#define BUTTON_HOLD_TIME_INDICATION   3000
+#define BUTTON_HOLD_TIME_ACTION       10000
+
+#define BOARD_PWM_MAX                 1023
+
+#define LEDC_CHANNEL_1     1
+#define LEDC_CHANNEL_2     2
+#define LEDC_CHANNEL_3     3
+#define LEDC_TIMER_BITS    10
+#define LEDC_BASE_FREQ     12000
+
+#define WIFI_NET_CONNECT_TIMEOUT      30000
+#define WIFI_CLOUD_CONNECT_TIMEOUT    15000
+#define WIFI_AP_CONFIG_PORT           80
+#define WIFI_AP_IP                    IPAddress(192, 168, 4, 1)
+#define WIFI_AP_Subnet                IPAddress(255, 255, 255, 0)
+//#define WIFI_CAPTIVE_PORTAL_ENABLE
+
+#define USE_TICKER
+//#define USE_TIMER_ONE
+//#define USE_TIMER_THREE
+
+#if defined(APP_DEBUG)
+  #define DEBUG_PRINT(...) BLYNK_LOG1(__VA_ARGS__)
+#else
+  #define DEBUG_PRINT(...)
+#endif
+