18069996051/arduino-libs
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

初始化提交

Browse Source
This commit is contained in:
王立帮
2024-07-20 22:09:06 +08:00
commit c247dd07a6
6876 changed files with 2743096 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

86
arduino-cli/libraries/Adafruit_seesaw_Library/examples/joy_featherwing/joy_featherwing_example/joy_featherwing_example.ino Normal file
View File

@@ -0,0 +1,86 @@
#include "Adafruit_seesaw.h"
Adafruit_seesaw ss;
#define BUTTON_RIGHT 6
#define BUTTON_DOWN 7
#define BUTTON_LEFT 9
#define BUTTON_UP 10
#define BUTTON_SEL 14
uint32_t button_mask = (1 << BUTTON_RIGHT) | (1 << BUTTON_DOWN) |
(1 << BUTTON_LEFT) | (1 << BUTTON_UP) | (1 << BUTTON_SEL);
#if defined(ESP8266)
#define IRQ_PIN 2
#elif defined(ESP32)
#define IRQ_PIN 14
#elif defined(ARDUINO_NRF52832_FEATHER)
#define IRQ_PIN 27
#elif defined(TEENSYDUINO)
#define IRQ_PIN 8
#elif defined(ARDUINO_ARCH_WICED)
#define IRQ_PIN PC5
#else
#define IRQ_PIN 5
#endif
void setup() {
Serial.begin(115200);
while(!Serial) {
delay(10);
}
Serial.println("Joy FeatherWing example!");
if(!ss.begin(0x49)){
Serial.println("ERROR! seesaw not found");
while(1);
} else {
Serial.println("seesaw started");
Serial.print("version: ");
Serial.println(ss.getVersion(), HEX);
}
ss.pinModeBulk(button_mask, INPUT_PULLUP);
ss.setGPIOInterrupts(button_mask, 1);
pinMode(IRQ_PIN, INPUT);
}
int last_x = 0, last_y = 0;
void loop() {
int x = ss.analogRead(2);
int y = ss.analogRead(3);
if ( (abs(x - last_x) > 3) || (abs(y - last_y) > 3)) {
Serial.print(x); Serial.print(", "); Serial.println(y);
last_x = x;
last_y = y;
}
/* if(!digitalRead(IRQ_PIN)) { // Uncomment to use IRQ */
uint32_t buttons = ss.digitalReadBulk(button_mask);
//Serial.println(buttons, BIN);
if (! (buttons & (1 << BUTTON_RIGHT))) {
Serial.println("Button A pressed");
}
if (! (buttons & (1 << BUTTON_DOWN))) {
Serial.println("Button B pressed");
}
if (! (buttons & (1 << BUTTON_LEFT))) {
Serial.println("Button Y pressed");
}
if (! (buttons & (1 << BUTTON_UP))) {
Serial.println("Button X pressed");
}
if (! (buttons & (1 << BUTTON_SEL))) {
Serial.println("Button SEL pressed");
}
/* } // Uncomment to use IRQ */
delay(10);
}

149
arduino-cli/libraries/Adafruit_seesaw_Library/examples/joy_featherwing/joy_wing_oled/joy_wing_oled.ino Normal file
View File

@@ -0,0 +1,149 @@
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_ST7735.h> // Hardware-specific library
#include <SPI.h>
#include "Adafruit_seesaw.h"
Adafruit_seesaw ss;
#define BUTTON_RIGHT 6
#define BUTTON_DOWN 7
#define BUTTON_LEFT 9
#define BUTTON_UP 10
#define BUTTON_START 14
uint32_t button_mask = (1 << BUTTON_RIGHT) | (1 << BUTTON_DOWN) |
(1 << BUTTON_LEFT) | (1 << BUTTON_UP) | (1 << BUTTON_START);
#if defined(ESP8266)
#define IRQ_PIN 2
#elif defined(ESP32)
#define IRQ_PIN 14
#elif defined(ARDUINO_NRF52832_FEATHER)
#define IRQ_PIN 27
#elif defined(TEENSYDUINO)
#define IRQ_PIN 8
#elif defined(ARDUINO_ARCH_WICED)
#define IRQ_PIN PC5
#else
#define IRQ_PIN 5
#endif
// For the breakout, you can use any 2 or 3 pins
// These pins will also work for the 1.8" TFT shield
#define TFT_CS 6
#define TFT_DC 10
#define TFT_RST 9 // you can also connect this to the Arduino reset
// in which case, set this #define pin to -1!
Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST);
void setup() {
//while (!Serial);
Serial.begin(115200);
if(!ss.begin(0x49)){
Serial.println("ERROR!");
while(1);
}
else{
Serial.println("seesaw started");
Serial.print("version: ");
Serial.println(ss.getVersion(), HEX);
}
ss.pinModeBulk(button_mask, INPUT_PULLUP);
ss.setGPIOInterrupts(button_mask, 1);
pinMode(IRQ_PIN, INPUT);
Serial.println(F("TFT TIME"));
tft.initR(INITR_MINI160x80); // initialize a ST7735S chip, mini display
Serial.println("Initialized");
tft.setRotation(1);
uint16_t time = millis();
tft.fillScreen(ST7735_BLACK);
time = millis() - time;
Serial.println(time, DEC);
delay(500);
// large block of text
tft.fillScreen(ST7735_BLACK);
}
int last_x = 0, last_y = 0;
void loop() {
int y = ss.analogRead(2);
int x = ss.analogRead(3);
if(x > 600 && last_x < 600){
tft.fillTriangle(120, 30, 120, 50, 110, 40, ST7735_WHITE);
Serial.println(F("LEFT"));
}
else if(last_x > 600 && x < 600){
tft.fillTriangle(120, 30, 120, 50, 110, 40, ST7735_BLACK);
}
if(x < 400 && last_x > 400){
tft.fillTriangle(150, 30, 150, 50, 160, 40, ST7735_WHITE);
Serial.println(F("RIGHT"));
}
else if(last_x < 400 && x > 400){
tft.fillTriangle(150, 30, 150, 50, 160, 40, ST7735_BLACK);
}
if(y > 600 && last_y < 600){
tft.fillTriangle(125, 26, 145, 26, 135, 16, ST7735_WHITE);
Serial.println(F("DOWN"));
}
else if(last_y > 600 && y < 600){
tft.fillTriangle(125, 26, 145, 26, 135, 16, ST7735_BLACK);
}
if(y < 400 && last_y > 400){
tft.fillTriangle(125, 53, 145, 53, 135, 63, ST7735_WHITE);
Serial.println(F("UP"));
}
else if(last_y < 400 && y > 400){
tft.fillTriangle(125, 53, 145, 53, 135, 63, ST7735_BLACK);
}
if ( (abs(x - last_x) > 3) || (abs(y - last_y) > 3)) {
Serial.print(x); Serial.print(", "); Serial.println(y);
last_x = x;
last_y = y;
}
if(!digitalRead(IRQ_PIN)){
uint32_t buttons = ss.digitalReadBulk(button_mask);
//Serial.println(buttons, BIN);
if (! (buttons & (1 << BUTTON_DOWN))) {
tft.fillCircle(30, 18, 10, ST7735_GREEN);
Serial.println("B");
}
else tft.fillCircle(30, 18, 10, ST7735_BLACK);
if (! (buttons & (1 << BUTTON_RIGHT))) {
tft.fillCircle(10, 40, 10, ST7735_RED);
Serial.println("A");
}
else tft.fillCircle(10, 40, 10, ST7735_BLACK);
if (! (buttons & (1 << BUTTON_LEFT))) {
tft.fillCircle(50, 40, 10, ST7735_BLUE);
Serial.println("Y");
}
else tft.fillCircle(50, 40, 10, ST7735_BLACK);
if (! (buttons & (1 << BUTTON_UP))) {
tft.fillCircle(30, 57, 10, ST7735_YELLOW);
Serial.println("X");
}
else tft.fillCircle(30, 57, 10, ST7735_BLACK);
if (! (buttons & (1 << BUTTON_START))) {
tft.fillCircle(80, 40, 7, ST7735_WHITE);
Serial.println(F("START"));
}
else tft.fillCircle(80, 40, 7, ST7735_BLACK);
}
delay(10);
}